Used Materials Testing in Gauteng, South Africa

Falling Head Permeability Set (UTS-1320)

• Manufacturer: Labequip

Soil Permeability & Dispersibility Product Code: Description: The UTS-1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly fine-grained soils such as clay-like or silty soils, w...

Melting Pot (UTC-1070)

• Manufacturer: Labequip

Hardened Concrete Testing Product Codes: Description: The Melting Pot is designed for melting capping compound, sulphur, wax and similar materials. The melted paraffin wax is used to seal soil samples and other m...

CBR Mould and Accessories EN (CBR Mould and Accessories EN)

• Manufacturer: Labequip

Compacted Road Base and Subbase Soils Each accessory listed below should be ordered separately. Due to the continuous development of our products, the goods supplied may vary in detail to that illustrated on this...

Pocket Dial Penetrometer (UTS-0070)

Field Inspection and Sampling The UTS Series of Pocket Dial Penetrometers are ideal instruments to determine the penetration resistance of cohesive soil, especially when various range measurements are required. U...

Proctor Penetrometers (UTS-0695)

• Manufacturer: Proctor

Compacted Road Base and Sub-base Soils Product Codes: The UTS-0695 Spring Type Proctor Penetrometer is used for establishing the moisture-penetration resistance relation of fine-grained soils. The apparatus consi...

Efflux Index Apparatus (Flow Coefficient of Fine Aggregates) (UTA-0440)

• Manufacturer: Labequip

General and Geometric Properties UTA-0440 Efflux Index (Flow Coefficient of Fine Aggregates) Apparatus is used to obtain information about the shape and the angularity of grains of fine aggregates. The flow coeff...

Three Gang Prism Shrinkage Moulds (UTA-0850E)

• Manufacturer: Labequip

Thermal and Weathering Properties Product Code: Description: The Three Gang Shrinkage Mould is used for the determination of the effect of aggregates on the drying, shrinkage and length change of hardened concret...

Le Chatelier Mould (UTCM-0014)

• Manufacturer: UTEST

Physical and Chemical Properties Product Code: Description: The soundness of cement, fly ash for concrete and lime is determined by using the Le Chatelier moulds and Le Chatelier Water Bath (UTCM-0016) according ...

Automatic Vicat Apparatus (UTCM-0550E)

Physical and Chemical Properties Product Code: The setting time determination of cement/mortar/gypsum is one of the most important parameters for the quality inspection and verification. The machine is based on t...

Solid Mould (UTCM-0670)

• Manufacturer: Labequip

Compression and Flexural Machines The UTCM-0670 Solid Mould is used to determine the water retention of masonry cement specimens. Due to the continuous development of our products, the goods supplied may vary in ...

Beam on two supports: shear force diagram (WP961)

• Manufacturer: Labequip

application of the method of sections to determine the shear force Description: WP 961consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point ther...

TRL DCP – DYNAMIC CONE PENETROMETER (LES-DCP)

The TRL Dynamic Cone Penetrometer (DCP) Supplied by Laboratory Equipment Supplies is an instrument designed for the rapid in-situ measurement of the structural properties of existing road pavements constructed of...

Displacement Transducers & Dial Gauges (UTGM-0060)

• Manufacturer: Labequip

Measuring Instruments Product Codes: Description: Linear Potentiometric Displacement Transducer (LPDT) provides an electric signal proportional to the linear shaft displacement. UTEST supplies high quality Linear...

Vebe Consistometer (UTC-0560E)

Fresh Concrete Testing Product Codes: Description: UTC-0560E model consistometer conforms to EN 12350-3 for determining the consistency of fresh concrete by means of the Vebe time. The unit consists of a vibratin...

FULLY-AUTOMATED SHEARTRAC III SYSTEM (ShearTrac III)

• Manufacturer: Labequip

Advanced Soil Systems ASTM D-5321 and D-6243 ASTM 3080/T236 BS 1377 The ShearTrac IIITM system is capable of performing the consolidation and shear- ing phases of a 305 mm x 305 mm (12 x 12 in. by 200mm(8.0 in) h...