Used Presses in Saxony, Germany

MENGELE H 250-25 Hydraulic Press

• Manufacturer: Mengele

Hydraulic die bending press / press brake for industrial use Manufacturer: Mengele Machine Type: Oil Hydraulic Die Bending Press Type: H 250-25 Year of Make: 1986 Maximum pressing force: 2,500 kN (approx. 250 t) ...

WMW Press

• Manufacturer: WMW
• Power requirement: 17 kW

Hydraulic single-column press WEMA ZEULENRODA PYE160/S/1M conventional control Without tables can be purchased separately Mechanical ejector available

SOM TEC Press

• Power requirement: 18 kW

Hydraulic press SOM TEC VSF 1 passage height 520 mm conventional control Description 950 kN press serves as a shaping machine for ceramic laminates, in which tool carriers with adjustable pins press from above ag...

W+B test press

Hydraulic test press WALTER + BAI AG 200 kN D-200-D / CSRG-5501 380 V

REMAK hydr. press

Hydraulic press REMAK ESM12 used , tested ! Dimensions: 1.550 x 850 x 2.000 mm

Hand screw press

Control type: conventional | Freight basis: in stock | Pressure performance: 10 t | Passage between the stands: 450 mm | Installation height: mm | Wheel inside ø: 1500 mm | Table size: 450 x 400 mm | Total power...

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin
• Stroke length: 400 mm
• Power requirement: 4.8 kW

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

WEMA ZEULENRODA double column press

• Manufacturer: Zeulenroda
• Power requirement: 47 kW

Double column press - hydraulic WEMA ZEULENRODA PYZ 250 with deep drawing device !!! Machine fits into 40' foot container

DUNKES Hydraulic press

• Manufacturer: Dunkes
• Power requirement: 45 kW

Hydraulische Presse DUNKES HZS 160 Druck/zeitabhängig steuerbar Zweihand- und Fußbedienung gebraucht, geprüft ! Video:

GECHTER pneumatic press

Pneumatic press with worktable GECHTER GmbH 45KNLPZS06 Press table: 270 x 340 mm, height above worktable: 160 mm Table spacing: 11 / 20 mm, groove depth: 19 mm Control: ZS 06 Worktable: Worktop: 850 x 800 x 38 m...

ECO DRIVE TECHNOLOGY Servo Press

Servo press , pneumatic press ECO DRIVE TECHNOLOGY GmbH Control type: EZS-034-400-008 used, tested !

Single Column Press - Hydraulic EIGENBAU

• Manufacturer: Eigenbau
• Daylight: 350 mm

Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation

Screw press #B16015

Manual spindle press, balancer used dimensions approx. 1600 x 600 x 2050 mm Subject to changes and errors in technical data, specifications and prices as well as prior sale.

screw press

• Manufacturer: Unknown

Press force 100 Pressing force [kn]: 100 | Table size [mm]: 600 x 100 | Installation height [mm]: 200