Used Processing in Connecticut, USA

KNOX 5610.5

• Manufacturer: KNOX

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT (250,000 BTU/HR MAX) IS SUPPLIED BY A PACKAGE BURNER FIRING INTO A REMOVABLE ROOF MOUNTED COMBUSTION CHAMBER. HEATED AIR, WHICH IS CIRCULATED BY A BELT DRIVEN ...

SECO WARWICK VACUUM FURNACE 42131 VERTICAL ELEVATOR VACUUM FURNACE

• Manufacturer: SECO WARWICK VACUUM FURNACE

BOTTOM LOAD VERTICAL VACUUM FURNACE WITH METALLIC HOT ZONE AND HEATING ELEMENTS HAVING CAPACITY OF: 1000 LBS @ 1000C. HEATING ELEMENTS ARE MOUNTED IN FLOOR BE...

OSI Oven

• Manufacturer: OSI

DOUBLE DOOR OPENING WITH PRESSURE LATCHES. HEAT (400,000 BTU/HR. MAX.) IS SUPPLIED BY AN ECLIPSE SERIES 40 AH EXCESS AIR BURNER FIRING INTO A COMBUSTION CHAMBER ABOVE WORK AREA, HEATED AIR IS CIRCULATED HORIZONTA...

STEELMAN 5610GSP

• Manufacturer: Steelman

DOUBLE DOOR OPENING WITH PRESSURE TYPE LATCHES. HEAT (400,000 BTU/HR MAX) IS PROVIDED BY A BURNER FIRING IN A PROTECTED COMBUSTION CHAMBER IN THE REAR. HEATED AIR ENTERS WORK AREA VIA DUCT WORK ON BOTH SIDE WALLS...

CRAWFORD

• Manufacturer: CRAWFORD

DOUBLE DOOR OPENING WITH HEATING ELEMENTS AND CIRCULATING FAN MOUNTED IN A PROTECTED CHAMBER BELOW WORK AREA.

DESPATCH

• Manufacturer: Despatch

DOUBLE DOOR OPENING WITH PRESSURE LATCHES AT BOTH FRONT AND REAR. ROOF MOUNTED HEATING ELEMENT CHAMBER WITH CIRCULATING FAN. HEATED AIR ENTERS WORK AREA VIA DUC...

GM ENTERPRISES GM HVF 201-M

• Manufacturer: GM ENTERPRISES

DOUBLE WALL HORIZONTAL LOAD WATER COOLED SHELL WITH LOCKING RING FRONT DOOR FOR 10 BAR OPERATION. INTERIOR HAS A MOLY HOT ZONE AND HEATING ELEMENTS. PUMPING SYSTEM INCLUDES MECHANICAL AND DIFFISION VACUUM PUMPS...

NOBLE INDUSTRIAL FURNACE

• Manufacturer: Noble

DIRECT GAS FIRED (2,400,000 BTU/HR MAX) CAR BOTTOM FURNACE WITH FRONT DOOR ATTACHED TO THE ROLL OUT CAR. INTERIOR IS LINED WITH LIGHT WEIGHT FIBER INSULATION. HEAT IS SUPPLIED BY (8) BURN...

CI HAYES VMHT/R-24-24-36

• Manufacturer: CI HAYES

HORIZONTAL WATER COOLED FRONT LOAD CHAMBER WITH SLIDING FRONT DOOR. INTERNAL HAS COIL TYPE HEATING ELEMENTS AND REAR MOUNTED FAN. FURNACE IS MISSING A STOKES 212 (150 CFM) VACUUM PUMPS.

THERMAL INNOVATIONS

• Manufacturer: THERMAL INNOVATIONS

DOUBLE DOOR OPENING AT FRONT AND REAR. SYSTEM WAS DESIGNED TO DRY 5" ALUMINUM WEB @ 1.5 TO 15 FPM USING IR ( THREE ZONES RATED 3 KW EACH) AND CONVECTION ( ONE ZONE RATED 18 KW) WITH 3 HP FAN THAT FEEDS NOZZLES ON...

BEAVERMATIC 7 X 7 X 10 GCBF

• Manufacturer: BEAVERMATIC

HEAT (4,100,000 BTU/HR MAX TOTAL 5-7 PSI) IS SUPPLIED BY (9) NOZZLE MIX BURNERS WITH SPARK IGNITION AND FLAME SAFETY FIRING FROM ABOVE AND BELOW WORK AREA.. INTERIOR IS LINED WITH LIGHT WEIGHT REFRACTORY. CAR I...

SINTERITE 12E-6Z

• Manufacturer: SINTERITE

SIX ZONE HYDROGEN/NITROGEN ATMOSEPHERE BELT FURNACE WITH CERAMIC BELT. ZONE 1-3 (16'L) IS HEATED BY SILICON CARBIDE HEATING ELEMENTS WITH ALLOY MUFFLE. ZONE 3-6 (14'L) IS HEATED BY MOLYBDENUM WIRE WOUND HEATI...

DESPATCH

• Manufacturer: Despatch

SYSTEM CONSISTS OF (2) ELECTRICALLY HEATED 1250 F MAX PIT FURNACES (38"DIA X 48"DEEP, 48"DIA X 60" DEEP), AIR QUENCH TANK, WATER QUENCH TANK AND OVER HEAD CRANEWAY WITH CRANE (CRANE NEEDS REPAIR). PREVIOUSLY USED...

Crest Custom Built Stainless Steel Passivation Finishing Line

Crest Custom Built Stainless Steel Passivation Finishing Line With (7) Manual Ultrasonic Wash and Rinse Dip Tanks, Crest Tru-Sweep Ultrasonic Controller, Fume Collection System, Vacuum Dryer Tank, Stainless Steel...

Burr King Model 15, 1.3-Cu Ft Bowl Vibratory Finisher

• Manufacturer: Burr King

Burr King Model 15, 1.3-Cu Ft Bowl Vibratory Finisher 150lb Bowl Capacity, S/N BK-32409