Used Saws in Germany

1984 EISELE LMS I 211

• Manufacturer: Eisele
• Power requirement: 1.7 kW

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Saw blade diameter: 275mm | Spindle speed: 4000 rpm | Total power requirement: 1,7kW

1984 EISELE LMS I 211

• Manufacturer: Eisele
• Power requirement: 1.7 kW

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Saw blade diameter: 275mm | Spindle speed: 4000 rpm | Total power requirement: 1,7kW

2001 Workbench MANUFLEX

with wooden support, approx. 150x80 cm, bandsaw MEP PH100, year of construction: 2001, inv. no.: 242800

1990 HEMA UH504

• Manufacturer: Hema
• Model: UH504

Engine brake Special features: - APA2 guide top and bottom NEW - Wheels 2022 renewed! - on the machine was cut only paper and cardboard therefore no mechanical load! - additional suction device in the table! - ma...

2018 METALLKRAFT BNBS 300×320 H-DG

• Manufacturer: Metallkraft

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Dimensions of saw-band: 3.660 x 27 x 0,9mm | Sawband speed: 35 / 70 m/min | Machine weight.: 605kg | Dimensi...

1982 BEHRINGER KS-250-HY

• Manufacturer: Behringer
• Power requirement: 1.5 kW

Vice adjustable in longitudinal direction by loosening the nuts. Mitre cut and straight cut: 45° and 90° with cutting pressure and lifting hydraulics After the cut is completed, the machine switches off and the s...

MEBA MEBAswing 320 G-HSS

• Manufacturer: Meba
• Model: MebaSwing 320
• Power requirement: 3 kW

Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no chan...

1990 KALTENABCH TL 350

• Manufacturer: Kaltenbach
• Model: TL 350

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Saw blade diameter: 350mm | Dimensions of saw blade: 350 x 30 x 50mm | Machine weight.: 100kg

MEP Shark 350 NC HS 5.0

• Manufacturer: MEP
• Model: Shark 350

Control: conventional - | Storage location: Factory | Capacity 90 degrees round: 350mm | Capacity 90 degrees square: 350mm | Dimensions of saw-band: 4640x34,1,1mm | Sawband speed: 15-115m/min | Weight of the mac...

MEBA MEBAswing 260 DG-HS

• Manufacturer: Meba
• Model: MebaSwing 260

Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each ...

1998 STAYER TF 84

• Manufacturer: Stayer

Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Saw blade diameter: mm | Cutting diameter: mm | Stroke: mm

2005 MEBA 335 A

• Manufacturer: Meba
• Model: 335 A

Control: NC - | Freight basis: Delivery ex warehouse Günzburg. | Dimensions of saw-band: 4400 x 34 x1,1mm | Capacity 90 degrees round: 335mm | Capacity 90 degrees flat: 500x335mm | Cutting speed: 15-150m/min | W...