Used Weaving

Two Controllers and Horn for TISI Ultrasonic Backing Seamer

Dukane Model 2120LN4-HL1 ultrasonic controller. Sonics & Materials EC1000S-34 ultrasonic controller. 20 kHz, 1000 watts. Ultrasonic horn for use with TISI backing seamer. All tested and working.

Gravity Conveyor

Gravity roller conveyor. 10′ sections. Overall width is 16″ to 36″. No legs. Several hundred pieces available. WS2670

2002 Tuftco 15′, 3/16th gauge loop pile tufting machine

Tuftco 15’, 3/16 th gauge loop pile tufting machine. YOM 2002. 5″, front side yarn feed with eccentric roller. Tufting 179″ wide. Includes Inverter. WS2656.

Unisorb V-100 Epoxy Grout

Unisorb Standard V-100 two-component epoxy resin system, offering excellent flowability, high resistance to impact and extremely rapid cure. Standard V-100 is a perfect choice for grouting machine bases, setting...

SciMatCo 6 Gallon, Bench Flammable Cabinet

SciMatCo 6 Gallon, Bench Flammable Cabinet, Manual Close, 16-3/4″W x 15-3/4″D x 21-1/4″H, 2 available. WS2615

2002 Tuftco 5/64th gauge single end servo scroll sample machine

Tuftco 5/64 th gauge single end servo scroll sample machine. 5/32 nd gauge front and rear. YOM 2002. WS2561

Tuftco 5/64th Ultraweave single end servo sample machine

Tuftco 5/64 th Ultraweave single end servo sample machine. Loop on front. Cut-loop on rear. WS2562.

CMC 1/10th gauge Paragon sample machine

CMC 1/10 th gauge Paragon sample machine with 16” cam shifters. Dual yarn feed with 2 pile height clutches on front side. WS2557

AYC yarn blow in systems for sample tube creels

AYC yarn blow in systems for sample tube creels. 4 available. System blows desired amount of yarn into each tube automatically. WS2568

New Brecknell 4’ X 4’ platform scales

New Brecknell 4’ X 4’ platform scales with digital readout. 5,000 lb capacity. 110 volts. From stock. WS2546.

6 Spindle Belmont auto-doff winder

• Manufacturer: Belmont

6 Spindle Belmont auto-doff winder. Model 4062/6. Inverter. 480V/3Ph/60Hz. WS2504

1990 4m, 1/8th gauge CMC PCUC tufting machine

4m, 1/8th gauge CMC PCUC tufting machine, Year 1990. Serial # D896590-715. Dual 5” yarn feed with 16” cam shifter, currently tufting 144” wide. Inverter Cabinet. Voltage is 480v/3ph/60hz. WS2494

2017 Fanuc Robot M-1iA 05SL with control system

• Manufacturer: Fanuc

Fanuc Robot model M-1iA 0.5SL with control system. Controller R-30iC Mate Plus, type A05B-2651-B421. YOM 2017. 200-230V / 1PH / 50-60Hz. WS2491

Steel yarn storage cages

Steel yarn storage cages, often referred to as Gorilla cages, with drop down access door on each end. Outside dimensions are 68.5” X 48” X 51”H. WS2478

Creel tubing 7/16th diameter HDPE

Creel tubing. 7/16 th diameter HDPE. 9 rolls at 3,000 ft per roll available. WS2471