Used controller in Lombardy, Italy

2000 BIGLIA B501/B cnc lathe

• Manufacturer: Biglia
• Model: B 501

Fixed head cnc lathe Max machinable diameter from bar: 54 mm Max machinable diameter from shot: 250 mm Max machinable length: 500 mm Max rotary diameter: 520 mm Devices and Accessories: CNC Fanuc Series 18i-T

MIYANO BNC 20 S CNC Lathe

• Manufacturer: Miyano
• Model: BNC20S

CNC single-spindle automatic lathe Max bar passage 20 mm Minimum bar passage 6 mm 12-position turret Spindle nose: flat Spindle nose outer diameter: 85 mm Spindle locking system: hydraulic rotary cylinder Spindle...

INDEX GB 65 cnc lathe

Year of production: Length: Width: Min/Max height: Weight: Loader Serial Number:

Multi-spindle lathe TORNOS SAS 16 DC

• Manufacturer: Tornos
• Model: SAS16DC

Multi-spindle automatic lathe Bar diameter: Maximum feed length: 63 mm Maximum length of turned part: 52 mm Number of spindle speeds: 16 Spindle speed (settable by PLC): 1200-8000 rpm Maximum radial slide travel:...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

Multi-spindle automatic lathe No. 6 spindles Max bar passage: Max feed length: 75 mm. Spindle: Production cycle range: pieces per minute: 4.9 to 72 - seconds per piece: 12.2 to 0.84. No. 6 transverse units Fixed ...

1998 CAMI TACN cnc lathe

Automatic cnc lathe Maximum bar passage: Max thread diameters with taps and dies: Max length of a feed: Spindle: Turret: Drive: Flanged motor power 4 kw, rotational speed 1450 rpm. Various accessories.

Cnc lathe GRAZIANO SAG 24

• Manufacturer: Graziano

cnc lathe, GRAZIANO, type SAG24 CNC, cnc FANUC 0 MATE TC, monitor 10.4 ", height center 500mm, distance beetwen centers mm 3000, bench wide mm 600, wide transversal carriage 400mm, max diameter on bench mm 1025, ...

1995 TSUGAMI BS20 cnc lathe (BE)

• Manufacturer: Tsugami
• Model: BS20

Automatic cnc lathe with sliding headstock. Numerical control Citizen Cinicom SYSTEM VD. Bar length 2500 mm. Material bar diameter 6-20 mm. Max turning length 200 mm. 12 Tools: No. 3 back drilling. No. 3 front dr...

MAS MASTURN 40 LATHE

• Manufacturer: MAS - Kovosvit
• Model: Masturn

Complete with: - n. 1 three jaws self centering chuck Ø 230 mm.

MURATEC MW 120G twin mandrel frontal cnc lathe

• Manufacturer: Muratec

Used MURATEC MW 120G twin-spindle frontal cnc lathe Used MURATEC MW 120G frontal twin-spindle cnc lathe is a fast CNC lathe equipped with 2 spindles (with AUTOBLOCK 210 chucks) and 2 separate turrets (with 8 posi...

Turning tool holder cod. Db DBD 164N1

From 25 x 25mm Double bevel Length: Width: Min/Max Height: Weight:

1999 GILDEMEISTER GM20-6 AC Lathe

• Manufacturer: Gildemeister
• Model: GM 20

Multi-spindle automatic lathe No. 6 spindles No. 6 side slides (of which No. 4 are cross slides) No. 6 slides with tool holders Max bar diameter: Round 20 mm (25 oversize) - Hexagonal 17 mm (21 spec) - Square 14 ...

2003 GILDEMEISTER GM20-6 AC lathe

• Manufacturer: Gildemeister
• Model: GM 20

Multi-spindle automatic lathe No. 6 spindles No. 6 side slides (of which No. 4 are cross slides) No. 6 tool slides Max bar diameter: Round 20 mm (25 oversize) - Hexagonal 17 mm (21 spec.) - Square 14 mm (17 spec....

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Round: 14 mm - Square: 10 mm - Hexagonal: 12 mm Max feed length: 75 mm. Spindle: Number of speeds: 16 - Spindle revolutions: 900-6000 rpm. - Production cycles: no. 22 Production c...

TORNOS AS 14-6 multi-spindle lathe

• Manufacturer: Tornos
• Model: AS14

No. 6 spindles. Max bar passage: Max feed length: 75 mm. umber of speeds: 16 - RPM: 900-6000 rpm - Production cycles: 22 Production cycle range: pieces per minute 4.9 to 72 - seconds per piece 12.2 to 0.84. No. 6...