Used controller

2002 Gravity die casting machine IMR C60X

• Manufacturer: IMR

Dimensions: Length: 3150mm; Width: 2500mm; Height: 1960mm 6KW; 400V; 50Hz Max opening of clamping plates: 700mm, side stroke: 335mm Hydraulic tank: 200l, max pressure: 60bar With 2 split dip tanks With light barr...

1987 Hydraulic core shooter VOGEL & SCHEMMANN, 15 l

• Manufacturer: Vogel

Type: KSM61500 CB/0C02, serial number: 4323, Com. number: 18.828 In good condition Completely equipped in cold box, with cabin, automatic control, all the movements are hydraulic Max dimensions of core boxes: hei...

Screw mixer for core sand 6t/h REISAUS-BAUMBERG

• Manufacturer: REISAUS-BAUMBERG

5,5kW, 400V 50Hz Dimensions: Lenght: 2830mm; With hopper and filling level sensor (3 dosages possible) With 2 screw for additiv With 2 acid pumps With control board PLC SIEMENS S7 Mixer is swivelling by hand Mixe...

2007 Sand feeder 31 liters, KLEIN

• Manufacturer: Klein

Inlet Ø 145 mm With control valves Inlet closure by cones Air supplied from below rather than from the pneumatic cylinder above Advantages: Lower air consumption per tonne and less wear and tear Maximum continuou...

Degassing unit (impeller) FOSECO/BOMA

• Manufacturer: Foseco

Dimensions: Length: 2300 mm; Width: 900 mm; Height: 2980 mm Minimum height under arm: 1400 mm; maximum: 2600 mm 2.5 kW, 400 V; 16 A; 50 Hz With blade With CE certification With Siemens S5 control system On a trol...

Core shooter ROEPER / LAEMPE, LKV25

• Manufacturer: Laempe / Röperwerk

Gassing plate fixed by vacuum Vacuum fixing of core box Hydraulic group STROMBERG Serial number 2736042, Type: HXU225G2V, 1, 4 kW, 380 V, 8,7 A, 1430 rpm Electric control cabinet BCR (BERNECKER und RAINER), type ...

Furan sand reclamation plant OMEGA

• Manufacturer: Omega

Consisting of: -Shake out: dimensions: 1230mm×1300mm With suction hood Inclusive crusher -Fluid bed cooler (Without water cooler) -Sand transmitter -Magnetic drum -1× attrition unit -Fluid bed dust extractor -pne...

1982 Semiautomatic shell moulding machine for cold and hot box, FMI

• Manufacturer: G&F + FMI, type FM 10AC

Construction year: 1982, weight: 500 kg Clamping dimension of the thermal jaws: 450 mm x 320 mm, one chucking side fixed, one chucking side mobile Heated with gas Gas heating with mobile gas plate With pneumatic ...

Vibration polishing machine ROTO FINISH, 1100 mm x 420 mm

4 kW, 380/440 V, 7 A, turns left-right Ø 220mm trap exchange stones Vibration by unbalance motor Vibration with stones and water Rubber inside, in good condition With polishing stones Without control box Delivery...

2018 Pouring installation HWS P-20-R; 4 x ladles 2t

• Manufacturer: HWS

With 4 ladles and 2 ladle lids Pouring time stationary: 17kg/s; synchronised: 8kg/s Max acceleration with synchronised movement to the moulding system: 0.25m/s2 With SIEMENS S7 control cabinet and GLS2010 monitor...

Core sand mixing plant, ± 2 - 3 t/h

Brand: BADIE, serial number: 7,79 mixingcup contenance 60 lit. With batch mixer Mixtensif, type KSU100, Ø 600 mm, for 120 kg sand With sand hopper above the mixer With 2supports for 60 l drums With 2 pumps and PL...

Screw mixer 5 t/h, with silo 2 m³, high speed

Copy IMF ± 12 kW, 220/380 V; ± 1000 rpm With additiv vis, length 900 mm, Ø 70 mm Mixer 9.2 kW; ± 980 rpm With silo ± 2 m³, 3 pumps, mix screw hinged, exhaust ventilator and 2 tanks with control board

Die casting cell (DGA 79) Bühler Evolution B 84 DV

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Striko Westofen, type W 90 SL, year 1996, SN 5043, capacity 900 kg, volume 820 dm³, temperature max. 1,000° C, metal AL, control, Westofen, type Westronics BG; cold cham...

Die casting cell (DGA 70) Bühler SC D/84V

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, ZPF, type W 65 DS, year 2012, SN F4-12-0181, capacity 650 kg, heating capacity 18.0 kW, max. temperature 850° C, metal AL, empty weight 2,600 kg, control system, ZPF (ba...

Die casting cell (DGA 80) Bühler Evolution B 120 DS

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Foundry 4 Thermo, type TD1100AE, year 2016, SN F4-15-0339, empty weight 3,000 kg, heating capacity 22 kW, capacity 1,200 kg, max. temperature 850° C, metal AL, control, ...