Used controller

Die casting cell (DGA 79) Bühler Evolution B 84 DV

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Striko Westofen, type W 90 SL, year 1996, SN 5043, capacity 900 kg, volume 820 dm³, temperature max. 1,000° C, metal AL, control, Westofen, type Westronics BG; cold cham...

Die casting cell (DGA 70) Bühler SC D/84V

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, ZPF, type W 65 DS, year 2012, SN F4-12-0181, capacity 650 kg, heating capacity 18.0 kW, max. temperature 850° C, metal AL, empty weight 2,600 kg, control system, ZPF (ba...

Coreshooter LAEMPE L10

• Manufacturer: Laempe / Röperwerk

With vacuum clamping device, plates 300mm x 200mm With core extraction slide 380mm x 300mm With gassing plate and ejector plate With hydraulic unit Maximum core box dimensions: width ± 700mm, depth ± 650mm, heigh...

Moulds turnover machine, 1800 mm IMF

Brand: IMF, serial number: 15462Weight: 3200 kg1425 rpm. ; 4 kW; 220/380 V2 clamping jaws 2 000 mm x 250 mmClamping and rotary movement hydraulicallyWith hydraulic unit ASEAMax. clamping width: 1750 mmWith contro...

Die casting cell (DGA 77) Bühler Evolution 66 D

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, Foundry 4 Thermwos, type W 650 S, year 2018, SN F4-18-0475, empty weight 2,775 kg, heating capacity 18 kW, capacity 650 kg, max. temperature 850° C, metal AL, control, S...

NEW gassing units LÜBER, type LW-FDA 825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

NEW gassing units LÜBER, type LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

Semi-automatic moulding line HWS / HSP 2

50 complete moulds on the plant 4 pouring and cooling lines (partly motorized) 1 mould return line with 3 turnings stations2 transfer carriages 1 mobile push-out station Remolding by hand with chain hoist SIEMENS...

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

2008 Core Shooter RÖPER FCS 25 HV-K

• Manufacturer: Laempe / Röperwerk

Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...