- Trusted Seller
Demag 250 kg crane system, overhead crane, hall crane, crane canopy GSA Type 4 3x2 m
- Manufacturer: Demag
- Model: System
GSA Type 4 control system Travel path: 2 m forward Crane system has already been dismantled. Complete plant closure, Large selection of storage platforms, pallet racks, shelving, and paternosters. High-quality in...
$1,857 USDBorken, Germany 
Trenčín, SlovakiaAutomatic adsorption filter system IUM Air-Clean Master .de
- Manufacturer: Demag
- Model: System
Automatic adsorption filter system Manufacturer: IUM Model: Air Clean Master The function is given, the photos show the actual condition. Further photos on request possible. Vroführung under power possible. Loadi...
$2,325 USDBerlin, Germany
Demag System 500/900-5200 (year 2004)
- Manufacturer: Demag
- Model: System
Demag 500 ton Clamping force: 500 ton Tie bar distance: 900x 800 mm Mould min/max: 400x810mm Screw dia: 95 mm
Trenčín, Slovakia
2002 Demag 420/2300system 1028
- Manufacturer: Demag
- Model: System
Clamping force: 420 | Snail: 70 | Snail armored: Armored | Spar width: 870 x710 | Wz. installation min.: 380 | Wz. installation max.: 820 | Wz. opening min.: 710 | Injection pressure: 1877 | Shot volume: 1212 | ...
France
2006 Demag SYSTEM 350/810-2300
- Manufacturer: Demag
- Model: System
Closing force: 350 T | Screw diameter: 70 mm | Passage between columns: 810 X 710 mm | Injectable volume: 1,212 cm³ of power | Injection pressure: 1877 | Mini-maxi mold thickness: 380-820 mm | Opening stroke: 71...
Bellignat, France
2001 Demag Ergotech ET 50- 120 H system 997
- Manufacturer: Demag
- Model: System
Clamping force: 50 | Snail: 25 | Wz. installation min.: 252 | Wz. opening min.: 550 | Injection pressure: 2000 | Shot volume: 61 | Bullet weight: 54 | Maximum weight: 3,5 | Length: 3,2 | Width: 1,35 | Height: ~2...
Germany2008 Demag System 800/1120-9500
- Manufacturer: Demag
- Model: System
Short circuit force [kn]: 8000 | Dimensions of mounting plates (hxv) [mm]: 1620 x 1500 | Clearance between columns (hxv) [mm]: 1120 x 1000 | Min./ max. mold height [mm]: 500 - 1050 | Maximum opening width [mm]: ...
Wrocław, Poland2008 Demag System 1500/1500-16000
- Manufacturer: Demag
- Model: System
Short circuit force [kn]: 15000 | Dimensions of mounting plates (hxv) [mm]: 2150 x 1880 | Clearance between columns (hxv) [mm]: 1500 x 1250 | Min./ max. mold height [mm]: 700 - 1400 | Maximum opening width [mm]:...
Wrocław, Poland
2009 Demag SYSTEM 650/1000-6400
- Manufacturer: Demag
- Model: System
Closing force: 650 T | Screw diameter: 95 mm | Passage between columns: 1000 X 900 mm | Injectable volume: 3367 cc | Injection pressure: 1895 | Opening stroke: 930 | Number of hours: 54000 | Order: NC5 | Robot i...
Bellignat, France
Radial block system DRS
- Manufacturer: Demag
- Model: System
The Demag DRS wheel block is a versatile wheel system and fits perfectly into the modular systems in 8 matched sizes with a maximum capacity up to 40 tons per wheel; these DRS wheel blocks are suitable for any ap...
Maarheeze, Netherlands
Wheel block system RS
- Manufacturer: Demag
- Model: System
The Demag wheel block RS systems are used in high-temperature applications or when a stainless steel housing is required. The RS systems are suitable up to 350 °C. RS radial block 5 sizes with a load capacity fro...
Maarheeze, Netherlands
2002 Demag 420/2300 system (1028)
- Manufacturer: Demag
- Model: System
Type of control: NC4 | Number of hours: 38 500 | Storage place: la France | Closing force: 420T | Opening stroke: 900mm | Columnar: 870*710mm | Mini/maxi mould: 800mm | Screw diameter: 70mm | Cm3: 1212 | Bars: 1...
Achen, France
Demag System Injection Molding
- Manufacturer: Demag
- Model: System
Good condition Demag System Injection Moldings available between 1999 and 2009 years. Located in Germany and other countries. Click request price for more information.
Germany
Tip: Enter manufacturer, model or keyword
