- Trusted Seller
Conair Tb250-4 Gravimetric Blender 115v-ac 1ph
- Manufacturer: Conair
“W/O TOP ATTACHMENT” Model number: TB 250-4 | Mpn: TB 250-4 | Shipping weight: 578 lbs | Shipping dimensions: 83 x 43 x 39 in | Additional notes: W/O TOP ATTACHMENT | Reference sku: 1070296
- Trusted Seller
Fives North Armerican Combustion Hiram 4575-12 High Velocity Gas Burner 12in
- Manufacturer: FIVES NORTH AMERICAN COMBUSTION
“New without Factory Packaging” Model number: 4575-12 | Model line: HIRAM | Mpn: 4575-12 | Shipping weight: 403 lbs | Shipping dimensions: 57 x 30 x 30 in | Reference sku: 1027908
- Trusted Seller
Hydrobotic SEACLOPS 500 Underwater Rov Remotely Operated Vehicle With Controller
- Manufacturer: HYDROBOTIC
“CASES INCLUDED” Model number: SEACLOPS 500 | Mpn: SEACLOPS 500 | Shipping weight: 303 lbs | Shipping dimensions: 51 x 47 x 43 in | Additional notes: CASES INCLUDED | Reference sku: 1039027
- Trusted Seller
Vinten 3465-3S Vision 250 Pan And Tilt Head Ball Base
- Manufacturer: VINTEN
“WITH HEAVY DUTY TRIPOD” Model number: 3465-3S | Mpn: 3465-3S | Shipping weight: 31 lbs | Shipping dimensions: 40 x 15 x 13 in | Additional notes: WITH HEAVY DUTY TRIPOD | Reference sku: 1029060
- Trusted Seller
2021 SnowBall Machinery SNCF-600
- Manufacturer: SnowBall Machinery
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 639717 | -capacity: 600L | -pneumatic requirements: 6 bar, 6L/min | -electrical requirements: 220V, 3P, 60Hz | -dimensions: 55.12″ x 35...
- Trusted Seller
2020 Convectium 710 Shark 010-0707100-0007-0A
- Manufacturer: Convectium
Fill up to 100 devices at a time in less than 60 seconds Dual heat injection system (Max temp of 125C) 120 PSI Maximum Pressure / Ultra-Quiet – Only 60 decibels
- Trusted Seller
2013 Frick XLP2-1012-503
- Manufacturer: Frick
335 Evaporative Tons Rated for R-717 and R-134a Refrigerants Base Heat Rejection = 6953 MBTUH 30 HP Fan Motor (2) 5HP Pump Motor Also Included: Mycom 200VLG Rotary Screw R-717 Refrigerant Compressor 400HP 480V 3P...
- Trusted Seller

Graco L-S20 5 Gallon
- Manufacturer: Graco
Machine type: Process Equipment | Machine location: California | Stock #: 482427 | Material container volume: 5.3 gal | Maximum air inlet pressure: 125 psi | – maximum flow rate: 1.6 GPM | – min flow: 1.6 GPM | ...
- Trusted Seller

Centurion 2.0
- Manufacturer: Centurion
This trimmer is ideal for large-scale operations looking for efficiency and flexibility in processing plant material. Related Products
- Trusted Seller
De Dietrich 30 Gallon Jacketed Glass-Lined Mixer Reactor
- Manufacturer: De Dietrich
ITEM #: 18630 Used De Dietrich 30 Gallon Jacketed Glass-Lined Mixer Reactor National Board Certified No: 1842Carbon steel construction on the housingReactor is 18"Ø with enameled 3009 glass lined interior surface...
- Trusted Seller
2009 Carruthers AdvantEdge 50002 Dicer/Slicer
- Manufacturer: Carruthers
480V The Carruthers Dicer comes with a box of new circular blades, a box of spacers, and the cleaning cart
- Trusted Seller

2000 Cool Clean Mega CYL-1000-HP
- Manufacturer: Cool Clean
-MAWP @ Full Vacuum 350 PSI @ 100° F -Min Design Metal Temp. -320° F @350 PSI Manufactures unit performance specs and requirements: -CO2 Machine currently can do about 60# bio mass at one time with a 6 hour run. ...
- Trusted Seller
2024 Dalmec MGC
- Manufacturer: Dalmec
900lb Capacity Machine type: Process Equipment | Machine location: Upon Request | Stock #: 661462 | Max working radius: 4000 mm | Max vertical lifting speed: 0,5 meters/second | Vertical lift: 2450 mm
- Trusted Seller

Mikro-ACM-Pulverizer, Model 60ACM, 60 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 60 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 60 hp, 220/440 volt motor,1700 rpm motor, separato...
Cleveland, OH - Trusted Seller

Mikro-ACM-Pulverizer, Model 60ACM, 75 HP
- Manufacturer: Mikro
Mikro-ACM-Pulverizer, Model 60ACM, 75 HP Used MikroPul ACM air classifying mill pulverizer, model 60ACM, carbon steel construction, 3000 rpm max main shaft, with 75 hp, 230/460 volt motor,1800 rpm motor, separato...
Cleveland, OH 
Toshiba ISGS500 Injection Molding
- Manufacturer: Toshiba
- Model: ISGS500
Good condition Toshiba ISGS500 Injection Moldings available between 1995 and 1997 years. Located in USA and other countries. Click request price for more information.
USA

