Machine Tools » Presses » Thuringia

Building Filters

18

Used Presses in Thuringia, Germany

Trusted Seller
Auction
1992 hydraulic press SMALL model HP100
- Manufacturer: WENIG
with foot switch, dimensions (W x H x D): approx. 120x220x140 cm
Ellrich, Germany
Visit Auction Website
Trusted Seller
Auction
HABASIT PQ-58 / AF-102 Hot Press Device & Flexproof Scissors in Case
Tool Case with Heat Press Device, Flexproof Scissors, Accessories, Documentation
Amt Wachsenburg, Germany
Visit Auction Website
Trusted Seller
Auction
Angle tilting device
with under-table, dimensions (W x H x D): approx. 120x80x60 cm
Ellrich, Germany
Visit Auction Website
PHILMUT type PHBM 450 t Hydraulic Press (powder metallurgy)
- Manufacturer: PHILMUT
- Made in Germany Philmut Spezial-Maschinenbau GmbH, Collmann (DE) - Machine is dismanled to parts, preserved all parts with vaseline - Condition: funtional, Working time only 500 hours - It was designed especial...
Amt Creuzburg, Germany
2007 SICMI KP 100
- Manufacturer: SICMI
- Power requirement: 2.2 kW
Hydraulic workshop press The machine is of the Italian make SICMI, which was traded by the Knuth company.
Schmölln, Germany
1987 STANKOIMPORT KD 2124K
- Manufacturer: Stankoimport
- Air coupling - Ross press safety valve - Balluff cam switch unit - Maintenance unit - automatic electric lubrication fluid grease - Accumulation tank for clutch - ram with breaking plate - prepared for ejector ...
Schmölln, Germany
1991 MÜLLER EXP 60 SF/HK
- Manufacturer: Muller
- Model: EXP 60 SFHK
- Power requirement: 4 kW
- Fixed table - clamping plate - Ortlinghaus hydraulic clutch with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely t...
Schmölln, Germany
2007 EBU HK 200 FR
- Manufacturer: EBU
- Model: HK 200 FR
– Hydraulic clutch – Fixed table – Hydraulic overload protection in the ram – Hydraulic connecting rod clamp – Motorized ram height adjustment 120 mm with digital display of the set ram height, rapid and creep sp...
Schmölln, Germany
1979 ZEULENRODA PYE 10 S1
- Manufacturer: Zeulenroda
- Model: PYE 10
- Power requirement: 5.2 kW
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm/sec | Speed up: 450 mm/sec | Distance table - ram: 630 mm ...
Schmölln, Germany
1986 ZEULENRODA PYE 160 S1M
- Manufacturer: Zeulenroda
- Model: PYE 160
- Stroke length: 200 mm
- Daylight: 500 mm
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm/sec | Speed up: 125 mm/sec | Distance table - ram: 1000 m...
Schmölln, Germany
1995 MÜLLER EXP 100 SFHK
- Manufacturer: Muller
- Power requirement: 5.5 kW
- Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE
Schmölln, Germany
1968 IWK HEP 40
- Manufacturer: IWK
2 guide pillars 2 parallel grooves in ram and table, running transversely
Schmölln, Germany
1980 WEINGARTEN ARP 200
- Manufacturer: Weingarten
- Model: ARP 200
- Power requirement: 15 kW
The machine is checked in our warehouse and receives a current one Press test with protocol. The machine is safe for manual inlay work. - Operating instructions available On request, the machine can be used at an...
Schmölln, Germany
AMBOLD PEEV 40.4
- Manufacturer: ambold pressen- und maschinenbau
- Power requirement: 3.5 kW
- hydraulic clutch-brake combination - Central lubrication bird - Balluff cam switch - Control cabinet with touchscreen - Height adjustable table - foot switch
Schmölln, Germany
1984 MÜLLER CD 100.11.69
- Manufacturer: Muller
- Power requirement: 30 kW
- Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...
Schmölln, Germany

12