Construction » Directional Drilling » Spain

Search By Manufacturer

Search By Autonomous Community

Building Filters

13

Used Directional Drilling in Spain

  • Trusted Seller
    VERTICAL/ HORIZONTAL TWO HEAD DRILL

    VERTICAL/ HORIZONTAL TWO HEAD DRILL

      Vertical / horizontal two-head drill

      Barcelona, Spain
    • Trusted Seller
      1994 VERMEER D14/24

      1994 VERMEER D14/24

      • Manufacturer: Vermeer

      Horizontal drilling machine. The machine is approximately 5 meters long, has independent hydraulic equipment and can be separated from it up to 20 meters away. It has an operator's manual in Spanish, a maintenan...

      Spain
    • Stems for directional drilling

      Stems for directional drilling

        For pilot hole guidance.

        Fuenlabrada, Spain
      • SEGOQUI PH-220

        SEGOQUI PH-220

          Rotary drilling machines for horizontal boreholes, for collectors, water and gas sewerage, cable, etc. These machines, which allow simultaneous drilling and laying of the metallic pipe, can work for different dia...

          Fuenlabrada, Spain
        • Steerable systems

          Steerable systems

            For horizontal rotary drilling. Directional tube to correct the drilling, consisting of a steerable tube, formed by hydraulic cylinders and two inclination sensors, as well as a small computer where the operator ...

            Fuenlabrada, Spain
          • THD-20 DRIVING EQUIPMENT FOR DRAINS

            THD-20 DRIVING EQUIPMENT FOR DRAINS 20 METERS OF TRAVEL

              Machine to execute wick drains, with 20 meters of useful stroke. It is a mast that can be coupled to a basic backhoe, and can perform around 5,000 linear meters / day of drains. The equipment is designed to nail ...

              Fuenlabrada, Spain
            • SEGOQUI 07

              SEGOQUI 07

              • Manufacturer: talleres segovias.l

              Drilling rigs designed for specific geothermal works, mounted on a tracked carriage, and equipped with a mobile rod magazine, upper and lower rubber stoppers for detritus collection, and very fast maneuvering and...

              Fuenlabrada, Spain
            • THD-20

              THD-20

                Machine to execute wick drains, with 20 meters of useful stroke. It is a mast that can be coupled to a basic backhoe, and can perform around 5,000 linear meters / day of drains. The equipment is designed to nail ...

                Fuenlabrada, Spain
              • Helices

                Helices

                • Manufacturer: talleres segovias.l

                For both hard ground (cutting tools) and soil (teeth), in diameters ranging from 400mm to 2,500mm, in special and anti-wear steels, with replaceable teeth and cutting tools.

                Fuenlabrada, Spain
              • STAFFA CFA

                STAFFA CFA

                • Manufacturer: Staffa

                Rotation table for CFA continuous propeller. STAFFA brand, made in Italy, 150mm hexagonal cup coupling. to make piloting with continuous propeller. We export and transport all over the world. New located in Colom...

                Barcelona, Spain
              • CPI 7 Tools and Sludge

                CPI 7 Tools and Sludge Equipment

                  6-meter bentonite tanks (12 units) 12-meter bentonite tank (2 units) Auger (propeller) Ø980mm, two inlets with prongs, Kelly box 200x200mm (1 unit) Auger (propeller) Ø850mm, two inlets with prongs, Kelly box 200x...

                  Seville, Spain
                • SOILMEC SM-103 Long Mast

                  SOILMEC SM-103 Long Mast

                  • Manufacturer: Mast Explorer
                  • Machine weight: 5.3 kg

                  Rated power: kW (CV) 47 @ 2300 rpm | Maximum width: mm 1,100 | Tile width: mm 200 | Maximum nominal torque: daNm 917 | Maximum speed: 348 rpm | Maximum shot: kN 61 | Career: mm 2330 | Maximum shot (1st layer): k...

                  Madrid, Spain
                • SOILMEC CM-40J

                  SOILMEC CM-40J

                  • Manufacturer: Soilmec
                  • Machine weight: 35 kg

                  Rated power: kW (HP) 132 (177) @ 2500 rpm | Maximum width: mm 2500/3800 | Tile width: mm 600 | Maximum nominal torque: daNm 2400 | Maximum speed: 191 rpm | Maximum shot: kN 100 | Career: 18500 mm | Maximum shot ...

                  Madrid, Spain

                Overview

                Directional drilling is a technique used in the oil, gas, and construction industries to drill at multiple angles rather than just vertically. This allows for the drilling of wells in different directions, making it possible to reach reserves that are not directly below the drilling site. It is essential for accessing hard-to-reach areas and reducing the environmental impact of drilling operations.

                FAQ

                What should I consider when buying a directional drilling machine?

                Consider the machine's drilling capacity, the type of terrain it can handle, and its compatibility with various drilling fluids. Check for maintenance records and overall condition.

                How can I ensure the safe shipping of a directional drilling machine?

                Use a specialized transport service experienced in handling heavy machinery. Ensure the machine is properly secured and protected against potential damage during transit.

                What maintenance is required for a directional drilling machine?

                Regular maintenance includes checking and replacing drill bits, inspecting hydraulic systems, and ensuring all moving parts are lubricated. Follow the manufacturer’s maintenance schedule for optimal performance.