Used disco

Dravo Pelletizing Disk, 14", S/S, 0.25 HP

• Manufacturer: Disco

Dravo Pelletizing Disk, 14", S/S, 0.25 HP Used Dravo pelletizing disk, stainless steel construction, 14" diameter disk, on base with 0.25 hp motor.

Niro/Aeromatic Spheronizer Disk, Model S320

• Manufacturer: Niro Aeromatic

Niro/Aeromatic Spheronizer Disk, Model S320 Used Niro/Aeromatic spheronizer disk, model S320, stainless steel.

6"/9" Belt/disc Sander - 09514506

Made In Taiwan, 3/4 Hp, 3450 Rpm Name: Belt/disc Sander | Arrival date: 08-25-2025 | Dimensions l x w x h (inches): 23 x 18 x 57 | Capacity: 6"/9" | Electrical: 1/60/110 | Weight (lb.): 165 | Available quantity: 1

Industrial Belt and Disc Sander, Dust Collection Port

Industrial Belt and Disc Sander, typically supports 120V or 240V power supply, with a motor power rating ranging from 1 HP to 2 HP, belt size commonly 6" x 48", disc diameter often 9" or 10", table tilt range usu...

Dryer-Thermal Disc 1,200 mm (48 in) Carbon Steel - IPP# 96720

• Manufacturer: Bepex

Torus disc cooler Vessel rated 15 psig/full vacuum @ 385 degree F Outboard bearings Johnson rotary joints on shaft Max speed 15 rpm

Dryer-Thermal Disc 1,750 mm (69 in) Carbon Steel - IPP# 96831

• Manufacturer: Disco

Torus disc dryer The rotor is 60" diameter x 14' long, and is hard faced. The rotor is cored for steam heating Heating medium is steam Trough is 69" wide x 177" long x 84" high with a vapor dome. Total height wit...

Carbon Steel Dryer-Thermal Disc - IPP# 33050

• Manufacturer: Disco

Torus disc dryer screw 150 psi @ 375 deg F Trough is 64" long x 28" wide x 36" deep Requires 5 HP drive No cover

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...

Centrifuge-Disc Bowl 7.5 kW (10 HP) - IPP# 2205

• Manufacturer: Disco

Hermetically sealed 316 SS solid disc bowl centrifuge

Centrifuge-Disc Bowl 37 kW (49.6 HP) Stainless Steel Austenitic - IPP# 238457

• Manufacturer: Disco

S1657 with control system With Clean In Place with an Ra0.8 finish Variable discharge system with water cooled jacket Maximum feed density 1100 kg/m3, maximum sediment density 1400 kg/m3. Feed temperature 0-100 d...

Centrifuge-Disc Bowl 2.2 kW (3 HP) - IPP# 94767

• Manufacturer: Disco

solid bowl disc centrifuge. Attached feed and discahrge pump. Sludge volume 1.5 liters. 3-phase separator. Ring dams and tools.

Centrifuge-Disc Bowl Stainless Steel 316 - IPP# 99373

• Manufacturer: Alfa Laval

Hermetic design. Paring disc discharge of clarified liquid. No motor

Centrifuge-Disc Bowl Stainless Steel - IPP# 83992

• Manufacturer: Disco

centrifuge frame, casing, hood, gears, clutch housing

Centrifuge-Disc Bowl 44.7 kW (60 HP) Stainless Steel 316 - IPP# 96555

• Manufacturer: Alfa Laval

disc nozzle centrifuge Internal nozzles with paring device Used for 10 yrs for yeast production Tachometer 1420-1500 rpm