Used Donau Radial Drills

DONAU DR-13 #0103722

• Manufacturer: Donau

Travel of arm: 16" | Travel of head: 0" - 16" | Distance from spindle @ top: 25" | Distance from spindle @ bottom: 9-1/2" | Spindle speeds: 200-100 LOW, 600-3400 HIGH | Feedrate: MANUAL | Table size: 36" X 24" |...

DONAU DR-32

• Manufacturer: Donau
• Arm extended: 914.4 mm

MODEL DR32 DONAU RAPID RADIAL DRILLING MACHINE Specifications: Arm Length: 920 mm Feed Range: 0.075-0.3 mm/min Feed Steps: 3 Quill Stroke: 190 mm Table Surface Area: 1230 x 500 mm Turning Speed Range: 40 Total P...

1962 DONAU high-speed radial drilling machine - DR30 29724

• Manufacturer: Donau

High-speed radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, high-speed radial drilling machine

Donau DR 23 - high-speed radial drilling machine

• Manufacturer: Donau

Donau DR 23 - High-Speed Radial Drilling Machine -Drilling capacity / steel approx. 28 mm -Thrust approx. 700 mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3 mm -Drilling depth 130 m...

DONAU DR 40z high-speed radial drilling machine

• Manufacturer: Donau

DONAU DR 40z High-Speed Radial Drill Technical Specifications: - Drilling capacity into solid ST 60 steel: 40 mm - 18 spindle speeds: 35–1800 rpm - Drill feed rates: 0.075–0.60 mm/rev - Drill column height adjust...

2014 DONAU FLEX 145 High-Speed Radial Drilling Machine

• Manufacturer: Donau

Description of condition : This machine is in "a s n e w" condition because never used !!! 97 hours only !!!

DONAU DR 23 high-speed radial drilling machine

• Manufacturer: Donau

Drilling capacity in steel 30 mm Thread cutting device Mechanical feed Clamping surface table 1050 mm x 400 mm Spindle mount MK 3 Machine light Coolant device Rotary table 0 250 mm with indexing plates Machine vi...

1997 DONAU Danuflex 135

• Manufacturer: Donau
• Model: DANUFLEX 135
• Column size: 170 mm

Accessories and Equipment – DONAU DANUFLEX 135 Accessories: ·1 × Drill chuck ·2 × Angle plates ·1 × Machine vice ·1 × Clamping cube Features / Equipment: ·Side drilling table, height-adjustable ·Drilling possible...

1971 Donau DR 23

• Manufacturer: Donau
• Model: DR 23
• Power requirement: 3.55 kW

Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank w...

1960 Donau DB 25

• Manufacturer: Donau
• Arm extended: 700 mm

This website uses cookies. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on .

Rapid radial machine Danube

• Manufacturer: Donau

Drilling vice and drillchuck This information has been prepared to the best of its ability - but is not binding in detail. All prices are exclusive of VAT with reservation for price / currency changes.

Danube DR23

Documentation available: Yes | Ce certificate available: No | Control: Conventional | Engine power: 2.0kW | Drilling depth: 130mm | Spindle speed max.: 1550rpm | Recording: MK3 | Table size width: 500mm | Table ...

Danube DR32

• Manufacturer: Donau

Documentation available: No | Ce certificate available: No | Control: Conventional | Drilling depth: 180mm | Table size width: 500mm | Table size length: 1200mm | Spindle diameter: 50mm | Max. discharge: 550mm |...

2006 Radial drilling machine DONAU Donauflex 145

• Manufacturer: Donau
• Model: DONAUFLEX 145

max. drilling diameter: 4.5 cm, 1 T-slotted clamping table about 75x120 cm, pickup in week 7

2006 Radial drilling machine DONAU Donauflex 145

• Manufacturer: Donau
• Model: DONAUFLEX 145

max. drilling diameter: 4.5 cm, 1 T-slot clamping table about 75x120 cm, 1 horizontal T-slot clamping plate, dimensions (W x H x D): about 60x5x80 cm, pickup in calendar week 7