• Doosan V740M VERTICAL CNC LATHE

    No price - Detroit, MI
    • Manufacturer: Doosan

    year mfg: 09/2006 swing over bed 31.5” maximum turning diameter 29.13” maximum turning length 29.92” spindle center height 42.54” travel x-axis 14.96” travel z-axis 29.92” maximum rate 236 ipm rapi...

  • 2011 Doosan Puma 400C CNC Turning Center

    No price - Indian Trail, NC
    • Manufacturer: Doosan

    equipped with: programmable tailstock* chip conveyor* chip blaster* tool presetter* hi-pressure coolant* 21 inch 3-jaw chuck* low hours!

  • DOOSAN Puma 300LMC 2006

    No price - Livonia, MI, USA
    • Manufacturer: Doosan

    ; travels: 9.8" x, 52.4" z, 0.001°c; 12-station tool turret; spindle: drive 30-hp; speeds to 2,800-rpm; bore 4.53"; c-axis, tailstock; 12" 3-jaw power chuck; tool eye; coolant system; 2006 jorgense...

  • 2007 Doosan PUMA 400 LB CNC LATHE

    No price - Detroit, MI
    • Manufacturer: Doosan

    doosan puma 400lb, f21itb, 15" chk, 31" sw, 82" ctr, 4.6" bar, 12 atc, 35 hp, t/s, hyd steady, c/c, 2007 equipped with: 15″ hydraulic chuck hydraulic steady rest programmable tailstock tool eye chi...

  • 2012 Doosan PUMA 480XLD CNC LATHE

    No price - Detroit, MI
    • Manufacturer: Doosan

    doosan 480xlm, f32i, 35" sw, 121" ctrs, (2) hyd steady, prog ts, 11" bar cap, 10 atc, 60 hp, 2012 equipped with: (2) smw slu5-zs steady rests (12.2″ max capacity) programmable tailstock ethernet to...

  • DOOSAN PUMA 400C FANUC 62226

    No price - Oyster Bay, NY Recently Added
    • Manufacturer: Doosan
    • Spindle Bore: 5"
    • Spindle Nose: A2 #15

    doosan puma 400c, new 11/2011 swing over bed.......................... 30.3" swing over saddle....................... 23.2" maximum turning length.................. 40.3 spindle bore / bar working ...

  • DOOSAN PUMA 400LC FANUC 60756

    No price - Oyster Bay, NY Recently Added
    • Manufacturer: Doosan
    • Spindle Bore: 5"
    • Spindle Nose: A2 #15

    doosan puma 400lc, new 11/2013 swing over bed.......................... 30.3" swing over saddle....................... 23.2" maximum turning length.................. 81.7 spindle bore / bar working...

  • DOOSAN PUMA 400LC FANUC 62128

    No price - Oyster Bay, NY Recently Added
    • Manufacturer: Doosan
    • Spindle Bore: 5"
    • Spindle Nose: A2 #15

    doosan puma 400lc, new 2008 swing over bed.......................... 30.3" swing over saddle....................... 23.2" maximum turning length.................. 81.7 spindle bore / bar working di...

  • DOOSAN PUMA 4100LB FANUC 61007

    No price - Oyster Bay, NY Recently Added
    • Manufacturer: Doosan
    • Spindle Bore: 62"
    • Spindle Nose: A2-11

    doosan puma 4100lb cnc turning center new: 2015, unused, cancelled order swing over bed......................... 31.1" swing over saddle...................... 23.2" maximum turning diameter...........

  • 2006 DOOSAN TT 2000 SY-GL

    No price - Waukesha, WI
    • Manufacturer: Doosan
    • Spindle Nose: A2-6

    fanuc 18i-tb control rear discharge chip conveyor twin tool pre-setter coolant blower y axis twin turret twin spindle live tooling