- Trusted Seller
Dowdeswell DP1
- Manufacturer: Dowdeswell
- Model: DP1
C/w skims, 14″ furrow, CAT offset Good wearing metal overall.
$3,679 USDRoyston, United Kingdom - Trusted Seller
Dowdeswell 11/10
- Manufacturer: Dowdeswell
- Working width: 2 m
C/w good rings, to suit 5 furrow plough Serial Number 7547
$1,572 USDRoyston, United Kingdom - Trusted Seller
Dowdeswell 9 10
- Manufacturer: Dowdeswell
- Working width: 1.8 m
C/w pulling bars Rings in fair condition, been used with a 5 furrow plough.
$769 USDRoyston, United Kingdom - Trusted Seller
2001 Dowdeswell DAFP
- Manufacturer: Dowdeswell
- Working width: 2.4 m
Qty 25 – 700mm cast rings. Comes with telescopic draw arms and 3pt linkage for transport. Will need a some TLC before going to work as a couple of the bearings have failed, a few broken spokes and the draw arms n...
$669 USDRoyston, United Kingdom - Trusted Seller
Dowdeswell DR7070
- Manufacturer: Dowdeswell
- Working width: 1.77 m
In excellent condition for the age! Runs up very well, 70″ working width and comes with depth wheel.
$2,609 USDRoyston, United Kingdom - Trusted Seller
2010 Dowdeswell 105 MA
- Manufacturer: Dowdeswell
- Model: 105 MA
Fitted with slatted bodies. 4+1 configuration with good wearing metal throughout and fitted with new landslides and points. Lines up very well, 36″ point to point and 27″ under-beam clearance. Manual furrow widt...
- Trusted Seller
2011 Dowdeswell 105 MA
- Manufacturer: Dowdeswell
- Model: 105 MA
Good wearing metal. 5+1 configuration, DDS bodies, pin adjust skimmers, manual vari-width and depth/transport wheel. Some wear in the main pivots but is otherwise a genuine plough.
- Trusted Seller
1995 Dowdeswell DP8A
- Manufacturer: Dowdeswell
- Model: DP8A
SCN bodies and full set of skimmers 2+1+1 configuration, steel depth wheel and manual front furrow adjustment. A mix of boards, some are sharp some nearly new. Turns over but there is some wear in the headstock.
$1,304 USDRoyston, United Kingdom - Trusted Seller
2000 Dowdeswell Plough Accs
- Manufacturer: Dowdeswell
To Fit KH Bolt on Location: CIRENCESTER Dowdeswell Misc Plough accs,Bolt on,To fit Kuhn,Year: 2000.
Grantham, United Kingdom - Trusted Seller
1990 Dowdeswell DP7E
- Manufacturer: Dowdeswell
- Model: DP7E
YCN bodies, 5+1 configuration. A mix of wear on the boards, majority have plenty of life remaining. C/w press arm.
$2,609 USDRoyston, United Kingdom - Trusted Seller
Dowdeswell DP7 D2
- Manufacturer: Dowdeswell
- Model: DP7 D2
C/w rear discs, 5+1 configuration Some welding but overall a good plough
$3,010 USDRoyston, United Kingdom - Trusted Seller
1997 Dowdeswell DP120S
- Manufacturer: Dowdeswell
- Model: DP120S
Fitted with DDS bodies. C/w a full set of skimmers, manual vari-width and depth wheel.
$2,609 USDRoyston, United Kingdom - Trusted Seller
1996 Dowdeswell DP120S
- Manufacturer: Dowdeswell
- Model: DP120S
4+1 configuration, DD bodies. Manual vari-width and currently set to 14 inches, 36 inches point to point. Fitted with depth wheel and rear discs. A mix of boards, some good and some sharp!
$3,545 USDRoyston, United Kingdom - Trusted Seller
1998 Dowdeswell DP250S
- Manufacturer: Dowdeswell
6 + 5 furrow, DD bodies Currently 6 + 3 configuration but has the 2 other furrows with it – pictured seperately.
- Trusted Seller
Dowdeswell DAFP/M 26 Ring
- Manufacturer: Dowdeswell
- Working width: 2.5 m
2.5m working width. 700mm cast rings. Comes with towing arms and 3pl for transport. A few of the cleaning chains are missing but a serviceable press overall.
$3,010 USDRoyston, United Kingdom
Tip: Enter manufacturer, model or keyword