Construction » Drilling Rigs » Emilia-Romagna

Building Filters

31

Used n/a in Emilia-Romagna, Italy

  • Trusted Seller
    Project SW60

    Project SW60

    • Manufacturer: Project

    N ° 1 factory nova adduction head with internal passage 40 mm Top or side attachment Shaft with thread on request With adjustment screws With wear bushing on gasket work area

    Fidenza, Italy
  • Trusted Seller
    Eurodrill HD5012

    Eurodrill HD5012

    • Manufacturer: Eurodrill

    N° 1 Eurodrill Rotary head model HD 5012 Fully overhauled new bearings new gaskets No. of prams new nitrogen charge Connection H90

    Fidenza, Italy
  • Trusted Seller
    SOILMEC

    SOILMEC

    • Manufacturer: Soilmec

    N ° 1 brand new double vice, passage 330 mm - actual passage 323 mm Fixed lower vice Swivel upper vice The two clamps are independent The upper vice is designed to be installed on sliding guides to function a...

    Fidenza, Italy
  • Trusted Seller
    2017 Teredo DC 2.8

    2017 Teredo DC 2.8

    • Manufacturer: Teredo

    N° 1 drilling rig, make teredo, model Dc2.8 Year 2017 general conditions: very good mat for 3 mt long drill rods Double clamp Rotary head with 2 mechanical speeds and variable speed motor Top mounted hydrau...

    Fidenza, Italy
  • Trusted Seller
    Project Rotary 2000 kgm

    Project Rotary 2000 kgm

    • Manufacturer: Project

    N ° 1 brand new rotary head Max torque variable from 2000 to 3200 kgm depending on the motors installed Speed from 10 to 100 rpm - with 150 lt / 1 'of oil 2000 kgm @ 50 rpm 1000 kgm @ 100 rpm - with 300 lt ...

    Fidenza, Italy
  • Trusted Seller
    Demag HR65

    Demag HR65

    • Manufacturer: Demag

    N ° 1 Demag brand drilling rig, model HR 65, tracked Deutz engine model F5L 912, power 95 hp Stroke for 3 m rods Max pull 6 tons Rotation head with max torque 700 kgm - 2 speeds Double vice with max passage ...

    Fidenza, Italy
  • Trusted Seller
    Clivio RAp3

    Clivio RAp3

    • Manufacturer: Clivio

    N ° 1 new factory rotation head, Clivio brand, RAP3 model Maximum torque 1300 kgm; 4 speeds Maximum speed up to 550 rpm Floating dinghy Drive by bent axis piston motor Adduction head with 40 mm passage Imme...

    Fidenza, Italy
  • Trusted Seller
    Rotary head Boart longyear DB540

    Rotary head Boart longyear DB540

    • Manufacturer: Boart Longyear
    • Model: DB540

    N° 1 fully overhauled rotary head make boat-longyear, model DB540 main reducer from Boart longyear with two speeds (low/fast) External gearbox from Spicer-Dana with 4 mechanical gearbox Brand new hydraulic pis...

    Fidenza, Italy
  • Trusted Seller
    2006 CASAGRANDE C6

    2006 CASAGRANDE C6

    • Manufacturer: Casagrande
    • Model: C6

    N ° 1 Casagrande brand drilling rig, model C6 Year 2006 Deutz diesel engine with 150 hp power Stroke for 3 m rods - effective stroke 4000 mm Max pull 7 tons @ 220 bar Rotation head t1200 6V; max torque 1320 ...

    Fidenza, Italy
  • Trusted Seller
    Rotary Head PJ-90-2000

    Rotary Head PJ-90-2000

    • Manufacturer: Project

    N° 1 brand new rotary head make Project model PJ 90_2000 max torque 2000 kgm; 2-speed 1st speed 0-65 rpm 2nd speed: 0-140 rpm Floating spindle with inner passage 63 mm Top mounted air/water/mud swivel with p...

    Fidenza, Italy
  • Trusted Seller
    2010 SOILMEC PSM 16GTS

    2010 SOILMEC PSM 16GTS

    • Manufacturer: Soilmec

    N° 1 drilling rig crawler mounted, make SOilmec-PSM, model 16GTS Year 2010 Diesel engine make Deutz, power 230 hp feed travel 4000 mm to use 3 m long drill rods max pull-back force 19.5 tons@ 250 bar Double ...

    Fidenza, Italy
  • Trusted Seller
    SoilSystem MK615 CS

    SoilSystem MK615 CS

    • Manufacturer: SoilSystem

    N ° 1 drilling rig with separate control unit brand SoilSystem, model MK 615 CS CE certified Separate power unit 4-cylinder turbo diesel engine, power 85 hp Stroke for asted at 1,5 mt Max pull 3, 5 tons Rot...

    Fidenza, Italy
  • Trusted Seller
    2003 Atlas Copco Mustang A32-CB

    2003 Atlas Copco Mustang A32-CB

    • Manufacturer: Atlas-Copco
    • Model: MUSTANG A32

    N ° 1 Atlas copco drilling rig, Mustang A32-CB model on tracks Diesel engine brand deutz, model F4L912, power 72 HP Stroke for rods of length 3000 mm - effective stroke 3700 mm Max pull 3200 kg Rotation head ...

    Fidenza, Italy
  • Trusted Seller
    Atlas Copco A30

    Atlas Copco A30

    • Manufacturer: Atlas-Copco
    • Model: A30

    N°1 drilling rig, make Atlas Copco, model mustang A30 crawler mounted. Diesel engine 3 cylinder, turbo charged, power 70 hp feed travel fitted for 3 mt long drill rods Max pull back force: 3,5 tons Rotary hea...

    Fidenza, Italy
  • Trusted Seller
    Nenzi Gelmina

    Nenzi Gelmina

    • Manufacturer: Nenzi

    N° 1 drilling rig, make Boart-nenzi, model gelmina crawler mounted Fully overhauled and repainted Diesel engine power 50 hp Feed travel to use 1.5 m long drill rods Max pull back force: 3900 kg mast extensio...

    Fidenza, Italy
123

Overview

Drilling rigs are specialized machines used to create holes in the ground for various purposes, including oil and gas extraction, water well drilling, and geological exploration. These rigs can range from small, portable units to large, complex structures that require significant setup and manpower. They are essential in industries that require deep, precise drilling operations.

FAQ

What should I consider when buying a used drilling rig?

Consider the rig's age, operational hours, condition, and the type of drilling it is designed for. Check for maintenance records and inspect the rig for any signs of wear or damage.

How do I ensure the drilling rig is shipped safely to my location?

Use a specialized heavy machinery transport service. Ensure the rig is properly disassembled, secured, and protected during transit to prevent damage.

What is the maintenance schedule for a drilling rig?

Regular maintenance includes checking and replacing fluids, inspecting and lubricating moving parts, and ensuring all safety systems are operational. Follow the manufacturer's manual for detailed maintenance intervals and procedures.