Building Filters
- Trusted SellerAuction
Sartek Wellcam 1.5 Drop Camera System/PRE-OWNED/DS18089/96925/DSP
DESCRIPTION: You are bidding on One (1) Sartek Wellcam 1.5 Drop Camera System. (#Commonwealth of KY, #Surplus, #Warehouse) GENERAL DISCLAIMERS APPLICABLE TO ALL DIVISION OF SURPLUS PROPERTIES ASSETS: PLEASE SEE P...
Frankfort, KYVisit Auction Website - Trusted Seller
2018 JUNJIN JD-800EII
- Manufacturer: Junjin
- Hours: 6,132 h
2018 JUNJIN JD-800EII CRAWLER VERTICAL DRILL, Cummins QSB6.7 Tier 4 Motor, 175hp, 6132 Hours, EROPS, AC, Backup Camera, Yamamoto YH80A Drifter with 2199 Hours, Kawasaki Variable Piston Hydraulic Pump, Carousel Ty...
- Trusted Seller
1999 SANDVIK D45KS
- Manufacturer: Sandvik
- Model: D45KS
- Hours: 26,358 h
1999 SANDVIK D45KS VERTICAL DRILL, Cat 3406E, 450hp, 26358 Hours, 29.5" Tracks, 60%, EROPS, Heat/AC, 95' 3x30' Drill, 6 3/4" Drill Bit, 1050/100 Air, Drill Has Been Gone Through Top to Bottom, Too Many New Parts ...
- Trusted Seller
2013 Bayshore DH60
- Manufacturer: Bay Shore
Model: DH60 Year: 2013 Hours: 7,800 Comes with 2 Round Kelly Bars and one Square Kelly Bar
2005 ATLAS COPCO ECM660 III
- Manufacturer: Atlas-Copco
- Model: ECM 660 III
- Horsepower: 260 hp
- Drill Pipe Diameter: 51 mm
Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours
2004 ATLAS COPCO ECM660 III
- Manufacturer: Atlas-Copco
- Model: ECM 660 III
- Horsepower: 260 hp
- Drill Pipe Diameter: 51 mm
3.5 – 4.5 Inch Class Montabert HC160 Drifter Very Well Maintained Unit 7036 Total Frame Hours 2251 Percussion Hours
Louisville, KY
2014 Soilmec SR-30
- Manufacturer: Soilmec
- Model: SR-30
- Horsepower: 200 hp
- Drilling depth: 37.7 m
- 120-ft max drill depth - Just under 10,400 hours - Cummins engine - 4x30 Kelly - 130mm sub size - Located in Mt. Sterling, KY
2016 Soilmec SR30lhr
- Manufacturer: Soilmec
- Model: SR-30
- Horsepower: 200 hp
- Drilling depth: 37.7 m
This machine brings a powerful punch in a nimble package. Price recently reduced!
2006 SANDVIK D25KS
- Manufacturer: Sandvik
- Model: D25KS
- Hours: 17,806 h
2006 SANDVIK D25KS Drill Rig on Track Chain Serial No.: 733017 Hours: 17806 CATERPILLAR C18 DIESEL ENGINE, Engine serial# - WJH01769 Compressor - 1060CFM /350 PSI SULLAIR ANGLEL DRILLING Drill was built and sold ...
2004 INGERSOLL-RAND DM45LPXL900
- Manufacturer: Ingersoll Rand
- Model: DM-45
- Hours: 29,234 h
2004 INGERSOLL-RAND DM45LP-XL900 LOW PRESSURE DRILL SERIAL NUMBER 7864 CAB WITH A/C, CUMMINS ENGINE 4 STEEL CAROUSEL DUST COLLECTOR ANGLE DRILLING AS OF NOV 1, 2022 WE HAVE REPLACED THE 2 SPOROCKS, 4 BOTTOM ROLLE...
1997 INGERSOLL-RAND DML1200
- Manufacturer: Ingersoll Rand
- Model: DM-L 1200
- Hours: 1,355 h
1997 Ingersoll-Rand DML-LP 1200 S/N 7302 Cummins, A/C cab, 35 ft mast, 30 ft drill stem, dust collector, carousel, auto rod changer, 1200 cfm x 110 psi air comp, hyd stabilizers, fire suppression, fast fuel Just ...
1984 INGERSOLL-RAND CM351
- Manufacturer: Ingersoll Rand
- Model: CM-351
HIGH-PRESSURE DTH DRILL RIG Cat Diesel Powered Onboard High-Pressure Sullair Air Compressor Runs 20’ft drill pipe
Louisville, KY
1998 INGERSOLL-RAND DM45E
- Manufacturer: Ingersoll Rand
- Model: DM-45E
- Horsepower: 600 hp
1998 INGERSOLL-RAND DM45E CRAWLER BLAST HOLE DRILL S/N 7282 A/C CAB CUMMINS 6 CYL 900 CFM 150 PSI AIR COMPRESSOR. 30FT MAST PART NUMBER 57501207, DUST COLLECTOR CAROUSEL AUTO ROD CHANGERS 3 HYDRAULIC STABILIZER H...
2015 EPIROC FLEXIROC D60
- Manufacturer: Epiroc
DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.
2015 ATLAS COPCO FLEXIROC D60
- Manufacturer: Atlas-Copco
- Model: FLEXIROC D60
- Horsepower: 475 hp
- Drilling depth: 55.5 m
DTH Class* Cat C15 Tier 4 Final Diesel Engine * Drill Pipe: 16’ft pipe x 4” x 2-7/8” REG API Thread. Very Good Condition This rig has 9800 engine hours and 6000 impact hours.
Tamrock Ranger 800 Drilling Rig
- Manufacturer: Tamrock
- Model: Ranger 800
Good condition Tamrock Ranger 800 Drilling Rigs manufactured in 2018. Located in USA and other countries. Click request price for more information.
USA