Used compactor in Wallonia, Belgium

2019 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

2024 Small round coating basin ±80l MJS

• Manufacturer: MJS

External dimensions: length: 750mm; width: 540mm, height: 1100mm Useful dimensions: Ø470mm; depth: 570mm Capacity ±80 litres For water sizing With 1 agitator; 0.75 kW Frequency-controlled, Speed adjustable by kno...

Sand laboratory sand compactability tester GF PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with samples sleeve Ø 50mm H120 mm

Sandlabo sand compactability tester G&F, sand lab PVG

With manual hydraulic lever and sample sleeve Testing of the compactability Put sand from the container on to the funnel sieve and press through until the sand in the sample specimen tube overflows Carefully lift...

Small core sand mixer V&S Mischka 0 GF

• Manufacturer: Vogel & Schemann

Brand Vogel & Schemann Dimensions: length: 600mm, width: 600mm, height: 900mm; Useful dimensions: depth: 240mm; Ø390mm

Small screw conveyro, 920 mm, Ø 145 mm

• Manufacturer: Kleine

External dimensions: length 2120mm, width 435mm, height 270mm Motor: 0,5 kW, 220/380 V, brand BAUER, 690 rpm, outlet: 19 rpm Second entrance possible

2 lifting bails for small casting ladles, ± 60 kg

• Manufacturer: Kleine

Ø hole for ladles 350 mm, ladles ± 60 kg Ø ± 370/280 mm, height 390 mm Tiltable by hand Without chain hoist With 1 control for hoist

Small bunker with 2 compartments 2 x 2,7 m³

1st screw CEM type MEUB90S4, 1,1 Kw, 220/380 V, 1410 rpm 2nd motor for screw CEM type MEUB90L8, 0,55 Kw, 220/380 V Driven by belt with one screw for each compartment Ø input 30mm (2x) Ø output 1x 200mm

2010 Pneumatic conveyor 30l HENSEL with small hopper

• Manufacturer: HENSEL

Dimensions: Length: 350mm; Width: 350mm, Height: 1500mm With small hopper and butterfly valve With CE mark on the conveyor

2008 Sand laboratory sand compactability tester SIMPSON Hartley 2552

• Manufacturer: Simpson

Dimensions appliance: 1200 x 800 x height: ±600mm Cabinet dimensions: Length: 1200mm; Width: 400mm; Height: 2000mm Suitable for batch mixers Compactability measurements

Small vibrating dosing channel, ± 2300 mm x 200 mm

• Manufacturer: Simex

Magnet vibrator with liner Weight: ± 300 kg | Outside dimensions: 2600 mm x 630 mm x 650 mm | Useful dimensions: ± 2300 mm x 200 mm x 60 mm | Motor sinex, serial number: 28463A3, 220/380  V

Small vibrating dose conveyor ± 2300 mm x 200 mm

• Manufacturer: Simex

Motor SINEX, serial number 28463A3, 220/380 V Magnet vibrator

Small wood saw, in gradual angle 2 x 45°

• Manufacturer: Omga

With vice, table, disc Ø 240 mm Weight: ± 40 kg | Outside dimensions: 700 mm x 550 mm, h. 450mm | Inside dimensions: 580 mm x 160 mm | Motor omga, serial number: 37687, 1,3 hp, 220/380 V

Fastloop system not motorized

Consists of : 2 x Roller track length: 6000mm; width: 1060mm; height: 410mm (57 rolls) 1x Roller track length: 4000mm; width: 1060mm; height: 410mm (39 rolls) rollers Ø 90mm, length: 990mm (Installation length: 1...

Steep conveyor 30 000 mm, useful width 1150mm

External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...