Country

  • 1995 DUNKES DZ 2

    No price - Staufenberg, Germany Recently Added
    • Manufacturer: Dunkes

    pneumatic table press fabr. dunkes type dz 2 : p95-7297 year 1995 technical specifications: pressing force at 6 bar: 20 kn pressing force at 12 bar: 40 kn stroke: 100 mm installation height min./m...

  • DUNKES HZT 4

    No price - Staufenberg, Germany Recently Added
    • Manufacturer: Dunkes

    hydraulic. tischpresse fabr. dunkes type hzt 4 : h81-1054 year 1981 technical specifications: crimping force: 40 kn stroke: 160 mm mounting hole: 60 mm plunger bore: 25 mm installation height: 250...

  • DUNKES HR 25

    No price - Leers, France
    • Manufacturer: Dunkes
    • Stroke: 200 mm

    ram strokes: 200 mm | depth of throat: 200 mm | maximum pressure: 25 t. | entre distance table and ram: 350 mm

  • 1981 DUNKES HZS 40 Ziehpresse

    No price - Staufenberg, Germany
    • Manufacturer: Dunkes

    hydraulic. fast runner single column drawing press fabr. dunkes type hzs 40 : h 77-581, year 1981 technical specifications: pressing power: 40 t operating pressure: 270 bar stroke: 150 mm installa...

  • 1985 DUNKES, KIRCHHEIM HEZ 100

    No price - Eislingen, Germany
    • Manufacturer: Dunkes
    • Capacity: 40 t
    • Stroke: 560 mm

    stroke: 560 mm | throat: 360 mm | dayligth: 800 mm | pressure: 100 t | type of control: conventional | type of machine: drawing press - 1-col.hydr. | country of origin: germany | table surface are...

  • DUNKES HR 25 / tr 25 Arch-bending press hydraulic #19765

    No price - Brügg, Switzerland
    • Manufacturer: Dunkes
    • Stroke: 50 mm/s

    up: 164 mm/s | pressure: 250 kn | max. stroke: 50 mm/s | motor power: 4 kw | total stroke: 160 mm | machine's weight about: 7500 kg | torsion redressing device: tr 25 | voltage 50 hz 3x: ...

  • DUNKES HS 4-40/20 Hydraulic press #1318

    No price - Brügg, Switzerland
    • Manufacturer: Dunkes
    • Stroke: 120 mm/s

    up: 450 mm/s | width: 1200 mm | height: 3500 mm | length: 1750 mm | pressure: 260 bar | max. stroke: 120 mm/s | min. stroke: 33 mm/s | motor power: 15 kw | oil quantity: 300 l | total stroke: 100 ...

  • DUNKES DZ 2

    No price - Höri, Switzerland
    • Manufacturer: Dunkes
    • Stroke: 100 mm

    throat: 120 mm | weight: 260 kg | pressure: 4 to | ram speed: 80 mm/sec | bore in ram: 25 mm | air pressure: -12 bar | ram diameter: 50 mm | ram stroke max: 100 mm | workpiece height: 260 mm | tot...

  • 1991 DUNKES HDZ 315/200/200

    No price - Krefeld, Germany
    • Manufacturer: Dunkes

    dunkes - hdz 315/200/200 - deep-pull presses was overhault for over 37.000 euro but never went into production again.

  • Dunkes HZT 6,3 ton Open gap presses

    No price - Deinze, Belgium
    • Manufacturer: Dunkes
    • Capacity: 6,3 ton
    • Stroke: 200 mm

    ideal press for broaching stroke: 200 mm | weight: 900 kg | capacity: 6,3 ton | table area: 470 x 340 mm | courant needed: 3x 220v | dim. table hole: dia 65 mm | eletric motor (power): 3 kw | deph ...