Used Processing in Wallonia, Belgium

Wire injection machine HOCHREUTER

Motor SEW 3,7 hp; 3250/190 rpm at the exit, 300 V With SIEMENS control S5-100 U With impulse generator

Double floor type grinder DÜRRSCHMIDT-VITEX, Ø 760 mm x 76 mm

63 m/s Stone Ø 760 mm, width 76 mm, bore Ø 304.80 mm Drive by cone pulley With 3 speeds With storage space Extraction from the bottom With emergency stop

Vibrating conveyor, 1470 mm x 200 mm x 170 mm

Magnetic motor JOST, type 5.20 C; 380 V; 5.2 A With silent block With magnetvibrator Without control

2006 Decoring unit CARRIER

Type: TMSO802005, serial number: MO 34701 Motor, type MVSI, serial number 15/7000 S90, 2 x 6 kW, 1500 rpm, 230/400 V Vibrating core breaker suspended in a metal construction which is composed of 3 parts Fixed to ...

1999 Induction furnace INDUCTOTHERM, 15 t (warm holding)

• Manufacturer: Inductotherm

Power: 1000 kW, frequency: 300 Hz Consisting of: 1 furnace 1 transformer 1 hydraulic unit 1 cooling station composed from water pumps and heat exchanger with out cooling tower 1 capacitor rack 1 pushout cylinder...

Vibrating dosing conveyor, useful dimensions 430 mm x 160 mm x 90 mm

Brand SAPIC With adjusting screw for the vibration way With magnetic vibrator

Screw conveyor 6050 mm, Ø 380 mm

Gear motor: BAUER, G32-10D174 283, 3 kW, 1420/57 rpm, 380/660 V With 3 filling hole 390 mm x 490 mm, distance 2740 mm Outlet Ø 190 mm With viewing door over the outlet

Screw conveyor 1600 mm, Ø 150 mm

Tube Ø 150 mm Motor BAUER, type: DKF941A/241; 1,5 kW, 2 hp, 380 V, 1420/185 rpm exit Center distance between in- and output 1600 mm Entrance Ø 400 mm reduced With 2 inspection doors 400 mm x 150 mm With pipe Ø 15...

Srew conveyor 2500 mm, Ø 150 mm

• Manufacturer: DIACO

Tube Ø 150 mm Motor BAUER, type DKF941AHZ241, 1,5 kW, 2 hp, 1420/89 rpm exit, 380 V Pipe Ø 150 mm, entrance Ø 285 mm - reduced With inspection door (as well as for emptying), 280 mm x 150 mm

Laboratory screen, Ø 200 mm

• Manufacturer: Chauvin Arnoux

Type: ROTO-LAB, serial number: 8474 With 10 screens 50, 71, 100, 140; 149; 160; 180; 200; 315; 400 micrometer.

Pendulum grinder, Ø 400 mm, width 65 mm

Motor SIEMENS, type 1LA27722AA40, 5,5 kW, 380 V, 2930 rpm With belt drive

Vibrating chut 3050 x 580 x 270mm

• Manufacturer: Küttner

Motor UHDE, type SM/20/4, serial number : 57720/24 5999/4, 1,1 kW, 1410 rpm, 220/380 V, 50 Hz, IP64 2 vibrating motors at the sides Input 1700 x 580mm Exit Ø 350mm, with 4 silent blocs

Core sand mixer 50 l, CFBI FENWICK

• Manufacturer: Fenwick

Gearmotor LO2, serial number: 101853, 3,5 kW, 1400 rpm, 220/380 V Discharge gate 270 x 160mm on the side, with cover

Casting ladle 2 t, SENSENBRENNER, with teapot spout

• Manufacturer: Senssenbrenner

With planet gearbox Ladle and refractory in good condition

Tumble belt shotblast machine GEORG FISCHER WST 14

• Manufacturer: Fischer
• Model: WST-14

Ø 1000 mm Motor LEROY SOMER, 3 kW, 220/380 V, 1410 rpm With 1 turbine 22 kW, filling volume 400 l = 1000 kg