Machine Tools » EDM machines » EDM Sinking

Building Filters

877

Used EDM Sinking

  • Trusted Seller
    MITSUBISHI FX3U-64MR/ES-A FX2N-8EX-ES/UL PROGRAMMABLE CONTROLLER

    MITSUBISHI FX3U-64MR/ES-A FX2N-8EX-ES/UL PROGRAMMABLE CONTROLLER T220754

    • Manufacturer: Mitsubishi
    • Model: EX8

    100-240VAC 50/60Hz 45W; OUT 30VDC/240VAC 2A (COSØ=1); IN: 24VDC 5mA

    $470 USD
    El Paso, TX
  • Trusted Seller
    2018 Makino U6 HEAT CNC

    2018 Makino U6 HEAT CNC WIRE EDM ***Low Hours***

    • Manufacturer: Makino
    • Model: U6

    Excellent Condition Low Hours Hyper i CNC Control 25.59" X-Axis Travel 17.7" Y-Axis Travel 16.53" Z-Axis Travel ±3.0" U Axis Travel ±3.0" V Axis Travel 35.8" x 27.9" Table Size 42.12" x 34.64" Inside Tank...

    Los Angeles, CA
  • Trusted Seller
    2018 Makino U6 HEAT CNC

    2018 Makino U6 HEAT CNC WIRE EDM ***Low Hours***

    • Manufacturer: Makino
    • Model: U6

    Excellent Condition Low Hours Hyper i CNC Control 25.59" X-Axis Travel 17.7" Y-Axis Travel 16.53" Z-Axis Travel ±3.0" U Axis Travel ±3.0" V Axis Travel 35.8" x 27.9" Table Size 42.12" x 34.64" Inside Tank...

    Los Angeles, CA
  • Trusted Seller
    ELTEE PULSITRON TRM-21

    ELTEE PULSITRON TRM-21

    • Manufacturer: ELTEE PULSITRON

    ELTEE PULSITRON TRM 21 SINKER EDM Equipped with: EP-300CP 30 AMP POWER SUPPLY 3 AXIS DRO PROGRAMMABLE Z-AXIS LARGE LED DISPLAYS **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS** | Power pack: 30.0 a ...

    Phoenix, AZ
  • Trusted Seller
    HANSVEDT 201

    HANSVEDT 201

    • Manufacturer: Hansvedt
    • Model: 201

    Hansvedt 201 30-Amp Conventional Sinker EDM with H-Pulse 201 Power Supply

    Phoenix, AZ
  • Trusted Seller
    HANSVEDT CS-10

    HANSVEDT CS-10

    • Manufacturer: Hansvedt
    • Model: CS-10

    Hansvedt Hardinge CS-10 Sinker EDM with X-Pulse Power Supply, Acu-Rite Digital Readout

    Phoenix, AZ
  • Trusted Seller
    2014 Charmilles AGIE SP-1EDM EDM

    2014 Charmilles AGIE SP-1EDM EDM

    • Manufacturer: Agie - Charmilles
    • Model: SP1

    Type: CNC Electrical Discharge with Lead | Tank: 19" x 31" x 9" | X axis: 13" | Axis y: 9.8" | Z axis: 9.8" | Phases: 3 | Weight: 3,160lbs | Dimensions: 58" x 60" x 84"

    Ciudad Cuauhtemoc, Mexico
  • Trusted Seller
    ELTEE PULSITRON TRM-21

    ELTEE PULSITRON TRM-21

    • Manufacturer: ELTEE PULSITRON

    ELTEE PULSITRON TRM 21 SINKER EDM Equipped with: EP-300CP 30 AMP POWER SUPPLY 3 AXIS DRO PROGRAMMABLE Z-AXIS LARGE LED DISPLAYS **BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS** | Power pack: 30.0 a ...

    Phoenix, AZ
  • CHARMILLES SINKER 200 EDM LOT

    CHARMILLES SINKER 200 EDM LOT OF FUSES FUSE SPEC UNITS 850230 CNC EDM

    • Manufacturer: Fanuc

    THIS PART CAME CHARMILLES ROBOFORM 200 SINKER EDM CALIFORNIA BUYERS ADD 9.25% SALES TAX

    $60 USD
    Los Angeles, CA
  • MAKINO WIRE EDM MACHINE PARAMETER

    MAKINO WIRE EDM MACHINE PARAMETER FLOPPY DISK W7129 CNC PARAMETERS

    • Manufacturer: Fanuc

    “120 DAY WARRANTY. REMOVED FROM MACHINE” OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION NEXT DAY AIR SERVICE AVAILABLE ON AL...

    $60 USD
    Los Angeles, CA
  • MAKINO WIRE EDM MACHINE PARAMETER

    MAKINO WIRE EDM MACHINE PARAMETER FLOPPY DISK W7129 CNC PARAMETERS

    • Manufacturer: Fanuc

    “120 DAY WARRANTY. REMOVED FROM MACHINE” OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION NEXT DAY AIR SERVICE AVAILABLE ON AL...

    $60 USD
    Los Angeles, CA
  • 2009 AgieCharmilles Form 20

    2009 AgieCharmilles Form 20

    • Manufacturer: Agie - Charmilles
    • Model: Form 20

    EDM Sinker Used AgieCharmilles Form 20 (2009) CNC EDM for Sale. This pre-owned AgieCharmilles CNC EDM sinker is located in The United States and available to be seen under power for an inspection. If you have a...

    USA
  • 2013 CHMER D322CL

    2013 CHMER D322CL

    • Manufacturer: Chmer

    EDM Sinker Used 2013 Chmer 32S (2019) CNC EDM for Sale. This pre-owned CHMER CNC EDM sinker is located in The United States and available to be seen under power for an inspection. If you have any questions rega...

    USA
  • 2015 Mitsubishi EA12V Advance

    2015 Mitsubishi EA12V Advance

    • Manufacturer: Mitsubishi
    • Model: EA12V ADVANCE

    EDM Sinker Used Mitsubishi EA12V Advance (2015) CNC EDM for Sale. This pre-owned Mitsubishi CNC EDM Sinker is located in The United States and available to be seen under power for an inspection. If you have any...

    USA
  • 1994 CHARMILLES ROBOFORM 20 EDM

    1994 CHARMILLES ROBOFORM 20 EDM PALLET 250423 63

    • Manufacturer: Agie - Charmilles
    • Model: Roboform 20

    HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

    $9,999 USD

    Get financing

    Est. $196/mo

    Los Angeles, CA
1617181920

Overview

EDM (Electrical Discharge Machining) sinking, also known as die sinking, is a process where electrical sparks are used to erode material from a workpiece to create complex shapes and fine details. This technique is commonly used in mold-making, precision engineering, and the production of intricate parts that are difficult or impossible to machine using traditional methods.

FAQ

What should I consider when buying a used EDM sinking machine?

Check the machine's working hours, overall condition, and maintenance history. Ensure the electrical components and software are up-to-date and functioning properly.

How do I ensure the EDM sinking machine is shipped safely to my location?

Use a specialized transport service for heavy and sensitive machinery. Ensure the machine is well-secured, protected from moisture, and transported in a climate-controlled environment if necessary.

What is the maintenance schedule for an EDM sinking machine?

Regular maintenance includes checking the dielectric fluid levels, cleaning the machine, and inspecting the electrode and workpiece for wear and damage. Follow the manufacturer's manual for detailed maintenance guidelines and intervals.