Machine Tools » EDM machines » Wire EDM

Building Filters

1568

Used Wire EDM

  • Trusted Seller
    Agie 620.511 PEC-10D

    Agie 620.511 PEC-10D

    • Manufacturer: Agie - Charmilles

    Agie Board for Agievision Wire PEC-10D 620.511 This unit works for Agie wire EDMs. It came from a 2003 Agie Classic 3S. This unit has been tested by our technician and is in good working order. All electron...

    Hampshire, IL
  • Trusted Seller
    Agie 699.174 DMD-14C

    Agie 699.174 DMD-14C

    • Manufacturer: Agie - Charmilles

    Agie Drive Board for Agievision Wire DMD-14C XY 699.174 This unit works for Agie wire EDMs. It came from a 2003 Agie Classic 3S. This unit has been tested by our technician and is in good working order. All...

    Hampshire, IL
  • Trusted Seller
    Agie 690.264 DMD-14C

    Agie 690.264 DMD-14C

    • Manufacturer: Agie - Charmilles

    Agie Drive Board for Agievision Wire DMD-14C UVZ & Wire 690-264 This unit works for Agie wire EDMs. It came from a 2003 Agie Classic 3S. This unit has been tested by our technician and is in good working or...

    Hampshire, IL
  • Trusted Seller
    Schaffner AG033097

    Schaffner AG033097

    • Manufacturer: Teseq - Schaffner

    Agie Schaffner Power Line Filter Schaffner Part #FS5596-30-33 Agie Part #AG033097 * 400VAC +/- 10% * 50 - 60 Hz * 30A @ 50 deg C * 25/085/21 * This item came off a working 2003 Agie Classic 3S wire ED...

    Hampshire, IL
  • Trusted Seller
    Agie Z-Axis Way Cover for

    Agie Z-Axis Way Cover for Classic $200

    • Manufacturer: Agie - Charmilles
    • Model: Classic

    Agie Z-Axis Way Cover 1 Available New

    Hampshire, IL
  • DRI-AIR M2000 Air Drying System

    DRI-AIR M2000 Air Drying System Wire EDM Machine Part

    • Manufacturer: DRI-AIR

    Came Off A Wire EDM Machine 230 Volts 1 phase 15 Amps Asset in Stock and Available Immediately

    Watertown, CT
  • Mitsubishi FX10 220V 3Ph Wire

    Mitsubishi FX10 220V 3Ph Wire Edm Parts New 8/1997

    • Manufacturer: Mitsubishi
    • Model: FX10

    Mitsubishi FX10 220V 3Ph Wire Edm Parts New 8/1997 We stripped the machine of all the components and scrapped the carcus. We have the Water pumps in the back of the machine - solenoidsServo motorsWhat you see i...

    Watertown, CT
  • no-image_en.png

    SODICK A500W

    • Manufacturer: Sodick
    • Model: A500W

    X: 19.7 in | Y: 13.7 in | Z: 10.0 in | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Control type: Sodick Mark 20

    Oak Park, IL
  • no-image_en.png

    FANUC 1BS/AWF

    • Manufacturer: Fanuc

    Equipped with: screen is bad, needs replacement - make offer. | X: 18.0 in | Y: 12.0 in | Z: 10.0 in | Auto threading (yes/no): Yes | Submerged (yes/no): Yes

    Oak Park, IL
  • 8525330 | Charmilles B Robofil

    8525330 | Charmilles B Robofil EX2X Circuit Board - For parts or not working

    • Manufacturer: Agie - Charmilles
    • Model: Robofil

    $462 USD
    Baroda, MI
  • no-image_en.png

    1995 Fanuc ROBOCUT ALPHA-1B

    • Manufacturer: Fanuc
    • Model: Robocut

    5 Axis CNC Wire Type EDM Control: FANUC 16-W | Table length: 27.9" | Table width: 20.4" | Maximum table load: 1400 Lbs | X-longitudinal travel: 18" | Y-cross travel: 12" | Z-vertical travel: 12" | U-travel: +/- 1...

    Town of Rockingham, VT
  • no-image_en.png

    2003 Fanuc ROBOCUT ALPHA-0IB

    • Manufacturer: Fanuc
    • Model: Robocut α-0iB

    5 Axis Wire Type CNC EDM -EQUIPPED WITH- Submerged Cutting Auto Threading Diamond Wire Guides (.004, .006, .008 sizes) Taper Cutting 3R Tooling Computer & Desk Extra Software Air Compressor

    Town of Rockingham, VT
  • no-image_en.png

    2000 Agie MONDO STAR 50

    • Manufacturer: Agie - Charmilles
    • Model: Mondo Star 50

    CNC Die Sinker EDM -EQUIPPED WITH- Macro Controller Extra 3R Tool Holders 2 Drums Fuchs Ecocut 30 Paper Cartrige Filters

    Town of Rockingham, VT
  • Trusted Seller
    no-image_en.png

    Fanuc Robocut EDM, Model A-0iA, New in 1999

    • Manufacturer: Fanuc
    • Model: Robocut

    Used Fanuc Robocut EDM, Model A-0iA, New in 1999 Fanuc Series 18i-W Controller 220/3/60

    United States
  • 2018 MAKINO U3

    2018 MAKINO U3

    • Manufacturer: Makino
    • Model: U3

    Features: Dielectric Fluid Height Setting Function, Micron Scale Feedback (X/Y), PICO Precision Guide System, Wire EDM Tension Gauge, Auto Wire Threading

    $95,000 USD

    Get financing

    Est. $1,788/mo

    ,
4647484950

Overview

Wire EDM (Electrical Discharge Machining) is a precision machining method that uses a thin wire to cut intricate shapes and contours in hard materials. It's commonly used in the aerospace, automotive, and medical industries for producing complex parts with tight tolerances and excellent surface finishes.

FAQ

What should I consider when buying a used Wire EDM machine?

Consider the machine's age, condition, and maintenance history. Check for any signs of wear and ensure the control system is up-to-date and functional.

How do I ensure safe shipping for a Wire EDM machine?

Use a specialized transport service that handles heavy machinery. Ensure the machine is properly secured, and sensitive components are protected during transit.

What is the maintenance schedule for a Wire EDM machine?

Regular maintenance includes checking and replacing the wire, cleaning the tank and filters, and ensuring the dielectric fluid is at the proper level. Follow the manufacturer's manual for detailed maintenance procedures and intervals.