Machine Tools » EDM machines

Building Filters

3036

Used computing

  • BELMONT MAXSEE CNC WIRE EDM

    BELMONT MAXSEE CNC WIRE EDM BOARD PCB-3 CR5-2

    • Manufacturer: Fanuc

    THIS PART CAME FROM A BELMONT MAXSEE WIRE EDM MACHINE THAT WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX

    $60 USD
    Los Angeles, CA
  • BELMONT MAXSEE CNC WIRE EDM

    BELMONT MAXSEE CNC WIRE EDM BOARD MOTOR DRIVER SVS1-2

    • Manufacturer: Fanuc

    THIS PART CAME FROM A BELMONT MAXSEE WIRE EDM MACHINE THAT WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX

    $60 USD
    Los Angeles, CA
  • JAPAX DX45NC CIRCUIT BOARD S-2708C

    JAPAX DX45NC CIRCUIT BOARD S-2708C CNC EDM

    • Manufacturer: Fanuc

    “REMOVED FROM MACHINE. 120 DAY WARRANTY. BUY BEFORE NOON, WILL SHIP SAME DAY.” NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. THIS PART CAME FROM A JAPAX DX45 NC DX45NC EDM MACHINE THAT WE DISMANTLED...

    $60 USD
    Los Angeles, CA
  • SODICK FS-30 CIRCUIT BOARD MADE

    SODICK FS-30 CIRCUIT BOARD MADE IN JAPAN F-330A CNC EDM

    • Manufacturer: Fanuc

    NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. THIS PART CAME FROM A SODICK FS-30 CNC EDM THAT WE DISMANTLED CALIFORNIA BUYERS ADD 9.25% SALES TAX 12165 BRANFORD ST. SUITE F SUN VALLEY CA 91352

    $60 USD
    Los Angeles, CA
  • JAPAX DX45NC CIRCUIT BOARD S-2750XB

    JAPAX DX45NC CIRCUIT BOARD S-2750XB CNC EDM

    • Manufacturer: Fanuc

    “REMOVED FROM MACHINE. 120 DAY WARRANTY. BUY BEFORE NOON, WILL SHIP SAME DAY.” NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. THIS PART CAME FROM A JAPAX DX45 NC DX45NC EDM MACHINE THAT WE DISMANTLED...

    $60 USD
    Los Angeles, CA
  • SAGINOMIYA AUTO REST TEMP. TIMER

    SAGINOMIYA AUTO REST TEMP. TIMER CNC MITSUBISHI DWC-90SB EDM

    • Manufacturer: Fanuc

    GOOD FEEDBACK DESIRED. THIS PART CAME FROM A 1994 MITSUBISHI DWC-90SB EDM WE DISMANTLED. CALIFORNIA BUYERS ADD 9.5% SALES TAX

    $60 USD
    Los Angeles, CA
  • 1996 MITSUBISHI CX-20 EDM CNC

    1996 MITSUBISHI CX-20 EDM CNC TOYO ROUND T676 FAN

    • Manufacturer: Fanuc

    THIS PART CAME FROM A 1996 MITSUBISHI CX-20 CX20 CNC EDM MACHINE THAT WE DISMANTLED.

    $60 USD
    Los Angeles, CA
  • FABCO-AIR PANCAKE D 121 X

    FABCO-AIR PANCAKE D 121 X CNC EDM D121X

    • Manufacturer: Fanuc

    “REMOVED FROM MACHINE. BUY BEFORE NOON, WILL SHIP SAME DAY.” NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. CALIFORNIA BUYERS ADD 9% SALES TAX 12165 BRANFORD ST. SUITE F SUN VALLEY CA 91352

    $60 USD
    Los Angeles, CA
  • NUMATICS PFI VALVE UNIT L12BA452V

    NUMATICS PFI VALVE UNIT L12BA452V CNC EDM

    • Manufacturer: Fanuc

    NEXT DAY UPS AIR SERVICE AVAILABLE ON OUR UPS ACCOUNT ONLY. THIS PART CAME FROM A TAKISAWA MAC-V4 CNC VERTICAL MILL THAT WE DISMANTLED CALIFORNIA BUYERS ADD 9.25% SALES TAX 12165 BRANFORD ST. SUITE F SUN VALLEY C...

    $60 USD
    Los Angeles, CA
  • MITSUBISHI VENTILATING FAN EF-30BTB05 200V

    MITSUBISHI VENTILATING FAN EF-30BTB05 200V CNC EDM

    • Manufacturer: Mori Seiki

    THIS PART WAS REMOVED FROM A MORI SEIKI SL-3H CNC LATHE WITH YASNAC CONTROL THAT WE DISMANTLED.

    $270 USD
    Santa Clarita, CA
  • HITACHI CNC EDM JAPAN SERVO

    HITACHI CNC EDM JAPAN SERVO MINI MOTOR N28 H63666

    • Manufacturer: Fanuc

    THIS PART WAS REMOVED FROM A MORI SEIKI SL-0H CNC LATHE WITH YASNAC CONTROL THAT WE DISMANTLED.

    $100 USD
    Santa Clarita, CA
  • HITACHI TECHNICAL DATA BOOK CNC

    HITACHI TECHNICAL DATA BOOK CNC EDM H-CUT-304 CNC EDM

    • Manufacturer: Fanuc

    THIS PART CAME FROM AN IKEGAI TCR25Y CNC LATHE WITH FANUC CONTROL THAT WE DISMANTLED.

    $60 USD
    Santa Clarita, CA
  • BROTHER CNC EDM BOARD B52J008-1

    BROTHER CNC EDM BOARD B52J008-1 00A EACH 1

    • Manufacturer: Fanuc

    HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

    $70 USD
    Los Angeles, CA
  • ELOX AGIE AMERITRON 100MS CNC

    ELOX AGIE AMERITRON 100MS CNC EDM COLLETS TOOLS TOOLING BRACKETS LOT OF

    • Manufacturer: Fanuc

    HELLO AND THANK YOU FOR YOUR INTEREST IN THIS PRODUCT. THIS PART IS USED AND WAS REMOVED FROM A CNC MACHINE. WE CANNOT TEST OUR PARTS, HOWEVER OUR RETURN RATE/RATIO IS EXTREMELY LOW. COMPANY THIS PART CAME FROM A...

    $100 USD
    Los Angeles, CA
  • CHARMILLES 690 EDM CNC Z

    CHARMILLES 690 EDM CNC Z AXIS HEAD WIRE THRU SPINDLE UNIT

    • Manufacturer: Fanuc

    THIS PART CAME FROM A PERFECTLY FULLY FUNCTIONAL 2003 CHARMILLES ROBOFIL 690 WIRE EDM THAT WE DISMANTLED.

    $360 USD
    Santa Clarita, CA
2122232425

Overview

EDM (Electrical Discharge Machining) machines are specialized equipment used to shape and cut hard metals and other conductive materials with precision. Utilizing electrical discharges or sparks, these machines can produce intricate and complex shapes that are difficult to achieve with traditional cutting tools, making them essential in industries like aerospace, automotive, and tool and die manufacturing.

FAQ

What factors should I consider when buying a used EDM machine?

Consider the machine's age, working hours, condition of the electrodes, and accuracy of the controls. Reviewing maintenance records and previous usage can also provide valuable insights.

How can I ensure safe shipping for an EDM machine?

Partner with a transport company experienced in handling heavy machinery. Ensure the machine is properly secured, with all moving parts stabilized, to prevent damage during transit.

What is the maintenance schedule for an EDM machine?

Regular maintenance includes checking and replacing worn electrodes, cleaning filters, and inspecting wiring and connections. Follow the manufacturer’s maintenance guidelines to ensure optimal performance.