Machine Tools » EDM machines

Search By Manufacturer

Search By Country

Building Filters

6565

Used EDM Machines

  • Trusted Seller
    Auction
    2010 Makino DUO43 Wire Electrical

    2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) 22" x 27" Work Table, 34" x 30" x 24" Diel...

    • Manufacturer: Makino
    • Model: Duo43

    2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) W120110 22" x 27" Work Table, 34" x 30" x 24" Dielectric Well, 12" x 18" XY Travels, Auto Wire Feed, Wire Recovery System, Pendant, Makino MGN-SG Controll...

    Saginaw, MI
    Visit Auction Website
  • Trusted Seller
    Como Filtration 210 Portable Filter

    Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM

    • Manufacturer: Como Filtration

    Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...

    $4,275 USD
    Millersburg, IN
  • Elox 8-2012 Sinker EDM Machine

    Elox 8-2012 Sinker EDM Machine

      Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...

      Posen, IL
    • Charmilles 811073 F Roboform 40

      Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D

      • Manufacturer: Agie - Charmilles

      “Used item as seen in the images. 30 day warranty included.” Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D 7-ZZ6H-72209-CS

      $576 USD
      Baroda, MI
    • Trusted Seller
      NEC EHV-163-238670 Power Supply Circuit

      NEC EHV-163-238670 Power Supply Circuit Board Unit Makino EDM CNC

      • Manufacturer: NEC

      Used, In Working Condition. Removed From a Working Environment. *Dusty From Storage* One Ceramic Insulator Missing Between Shunt on Back End. If this item ships as Flat Rate Freight please see details in Shippin...

      $840 USD
      Millersburg, IN
    • Trusted Seller
      1998 Brother HS5100 Wire Electrical

      1998 Brother HS5100 Wire Electrical Discharge Machine

      • Manufacturer: Brother

      Brother HS5100 Wire Electrical Discharge Machine (1) Complete for parts machine & a 2nd identical machine that has been parted out -- parts on pallet for the 2nd machine

      Toledo, OH
    • Trusted Seller
      Mitsubishi DWC-90Ha Edm, Not Operational

      Mitsubishi DWC-90Ha Edm, Not Operational

      • Manufacturer: Mitsubishi
      • Model: DWC-90

      Cornelius, NC
    • EDM DRILLMATE 22I

      EDM DRILLMATE 22I

      • Manufacturer: EDM DRILLMATE

      Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...

      Oak Park, IL
    • Trusted Seller
      15 KVA CAMMANN “C76A” METAL

      15 KVA CAMMANN “C76A” METAL TAP DISINTEGRATOR w/360-DEGREE ARM & HEAD ROTATION - POWER HEAD FEED

      • Manufacturer: Cammann
      • Model: C-76

      #C76A CAMMANN METAL/TAP DISINTEGRATOR SERIAL NO 102186, MODEL C76A Imperial Metric EQUIPPED WITH: #CMBL CAMMANN HEAD & HEAD HOUSING CAMMAMATIC HEAD FEED 25 GALLON BUILT-IN COOLANT SYSTEM CATALOG SPECIFICATIONS: A...

      $2,450 USD
      Cincinnati, OH
    • Elox 8-2012-DR Sinker EDM Machine

      Elox 8-2012-DR Sinker EDM Machine

        Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...

        Posen, IL
      • 2021 EDM DRILLMATE 22I

        2021 EDM DRILLMATE 22I

        • Manufacturer: EDM DRILLMATE

        Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes

        Oak Park, IL
      • 1999 MITSUBISHI EDM EA8

        1999 MITSUBISHI EDM EA8

        • Manufacturer: Mitsubishi
        • Model: EA8

        Equipped with: - Fan type cooler | X: 11.8 in | Y: 9.8 in | Z: 9.8 in | Table size-w: 13.7 in | Table size-l: 19.6 in | Worktank inside dimensions: 30 x 20 x 10" | Max. workpiece weight: 1210 Lbs. | C-axis: Yes ...

        Oak Park, IL
      • 2011 MITSUBISHI EDM BA-8

        2011 MITSUBISHI EDM BA-8

        • Manufacturer: Mitsubishi
        • Model: BA-8

        Equipped with: VERY LOW HOURS! | X: 12.6 in | Y: 9.84 in | Z: 8.66 in | Max. workpiece dimensions: 27.6 x 21.7 x 8.5" | Max. workpiece weight: 1100 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes |...

        Oak Park, IL
      • 2019 Makino U3 Wire EDM

        2019 Makino U3 Wire EDM

        • Manufacturer: Makino
        • Model: U3

        0.05 Micron Scale Feedback (X,Y), Automatic Wire Threading Unit, Dielectric Fluid Height Setting Function, PICO Precision Guide System The 2019 Makino U3 Wire EDM is designed for manufacturers who value precision...

        Schaumburg, IL
      • 2001 MITSUBISHI EDM FA20

        2001 MITSUBISHI EDM FA20

        • Manufacturer: Mitsubishi
        • Model: FA20

        X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Yes | Taper angle: 15.0 | Taper height...

        Oak Park, IL
      • no-image_en.png

        Cammann C-76 EDM machine

        • Manufacturer: Cammann
        • Model: C-76

        Good condition Cammann C-76 EDM machines. Located in USA and other countries. Click request price for more information.

        USA
      45678

      Overview

      EDM (Electrical Discharge Machining) machines are specialized equipment used to shape and cut hard metals and other conductive materials with precision. Utilizing electrical discharges or sparks, these machines can produce intricate and complex shapes that are difficult to achieve with traditional cutting tools, making them essential in industries like aerospace, automotive, and tool and die manufacturing.

      FAQ

      What factors should I consider when buying a used EDM machine?

      Consider the machine's age, working hours, condition of the electrodes, and accuracy of the controls. Reviewing maintenance records and previous usage can also provide valuable insights.

      How can I ensure safe shipping for an EDM machine?

      Partner with a transport company experienced in handling heavy machinery. Ensure the machine is properly secured, with all moving parts stabilized, to prevent damage during transit.

      What is the maintenance schedule for an EDM machine?

      Regular maintenance includes checking and replacing worn electrodes, cleaning filters, and inspecting wiring and connections. Follow the manufacturer’s maintenance guidelines to ensure optimal performance.