Building Filters
Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
Elox 8-2012-DR Sinker EDM Machine
Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...
Posen, IL- Trusted Seller
1995 CHARMILLES ROBOFORM 40
- Manufacturer: Agie - Charmilles
- Model: Roboform 40
machine was running up to the last day we had to remove it from power to make room for our new machine, the air handler and tool holders will be supplied, the chiller is not working, but we never had it working s...
- Trusted SellerAuction
NO RESERVE CHARMILLES TECHNOLOGIES EDM Calibration Kit 02681470 – Complete in Case
- Manufacturer: Agie - Charmilles
**NO RESERVE** CHARMILLES TECHNOLOGIES EDM Calibration Kit 02681470 – Complete in Case Charmilles Technologies EDM calibration / set-up kit, part number 02681470. Kit comes in the original yellow Charmilles hard ...
Fridley, MNVisit Auction Website - Trusted SellerAuction
NO RESERVE CHARMILLES TECHNOLOGIES EDM Calibration Kit 4605850 – Complete in Case
- Manufacturer: Agie - Charmilles
**NO RESERVE** CHARMILLES TECHNOLOGIES EDM Calibration Kit 4605850 – Complete in Case Charmilles Technologies EDM calibration / set-up kit, part number 4605850. Kit comes in the original yellow Charmilles hard ca...
Fridley, MNVisit Auction Website - Trusted Seller
2005 CHARMILLES ROBOFORM 350
- Manufacturer: Agie - Charmilles
- Model: Roboform 350
Electro erosion CHARMILLES ROBOFORM 350 - CN CHARLILLES - Year: 2005 - X Y Z strokes: 350 x 250 x 300 mm - Table surface: 500 x 400 mm - Maximum dimension of the room: 780 x 530 x 300 mm - Maximum passage under ...
- Trusted Seller
Charmilles Roboform 35P I EDM Machine
- Manufacturer: Agie - Charmilles
- Model: Roboform 35
We hereby offer this used Charmilles Roboform 35P EDM machine from 2001, located in Belgium. This high-performance Electrical Discharge Machining (EDM) solution is equipped with a sophisticated Charmilles control...
- Trusted Seller
Sure First DM408 I EDM Machine
- Manufacturer: Sure First
We hereby offer this used Sure First DM408 EDM machine from 2000, located in Slovenia. This reliable metalworking machinery offers a spacious working area of 700 x 400 mm, ensuring ample room for intricate projec...
- Trusted Seller
Baoma DB703A I Drill EDM
- Manufacturer: Baoma
We hereby offer this used Baoma DB703A drill EDM, located in Slovenia. This precision machine boasts a spacious working area of 486 x 310 mm, providing ample room for intricate drilling tasks. With a remarkable d...
2007 AGIECUT CLASSIC V2
- Manufacturer: Agie - Charmilles
- Model: Agiecut Classic
Races (x,y,z): 350*250*256 mm | Max. room size: 750*550*250 mm | Maximum workpiece weight: 200/450 kg | Wire diameter: 0.2 to 0.33 mm | Numerical control: AGIEVISION V
Sartrouville, France
AGIECUT CLASSIC 2
- Manufacturer: Agie - Charmilles
- Model: Agiecut Classic 2
Races (x,y,z): 350*250*256 mm | Max. room size: 750*550*250 mm | Maximum workpiece weight: 850 kg | Wire diameter: 0.25 to 0.33 mm | Cutting capacity: 300 mm2/min
Sartrouville, France
2009 AGIECUT VERTEX 3
- Manufacturer: Agie - Charmilles
- Model: Vertex 3
Races (x,y,z): 500*350*256 mm | Max. room size: 1050*650*250 mm | Maximum workpiece weight: 400/800 kg | Wire diameter: 0.07 to 0.33 mm | Better roughness: <0.1 µm | Numerical control: AGIEVISION 5
Sartrouville, France
2017 AGIE PROGRESS VP4
- Manufacturer: Agie - Charmilles
- Model: Progress VP4
Races (x,y,z): 800*550*525 mm | Races (u,v): 800*550 mm | Max. room size: 1300*1000*510 mm | Maximum weight of the part with bath: 3000 kg | Wire ø: 0,15 à 0,33 | Coil: 25 kg | Cutting capacity: Above 500 mm²/min
Sartrouville, France
2003 AGIETRON IMPACT 2
- Manufacturer: Agie - Charmilles
- Model: Agietron
Races (x,y,z): 350*250*350 mm | Max. room size: 820*420*250 mm or 650*580*250 mm | Maximum workpiece weight: 400 kg | Maximum electrode weight: 100 kg | Spindle chuck: Erowa | Tool changer: 28 positions | Axis c...
Sartrouville, France
2001 FANUC ALPHA 1iA
- Manufacturer: Fanuc
- Model: Robocut α-1iA
Fully serviced machine with 3 months warranty Machine status: Very good | Xyz races: 520 x 370 x 300 mm | Uv races: 120 x 120 mm (30° by 150 mm) | Max. room dimensions: 820 x 650 x 300 mm | Maximum authorized wei...
St-Priest-en-Jarez, France