Used EFI Large Wide Format Printers in England, United Kingdom

2017 EFI VUTEk Pro 16H

• Manufacturer: EFI
• Model: PRO 16H

Condition Excellent Ink Type UV Print Width/Area 1.6m Colour Combination CMYK & White (not currently in use) RIP Yes Power Requirements 3 Phase Availability Immediate. Viewing welcome and can be seen in pro...

2016 EFI VUTEk LX3 Pro

• Manufacturer: EFI
• Model: LX3 PRO

2016 EFI VUTEk LX3 PRO 3.2m Hybrid printer LED technology Resolution of up to 1000dpi 8 colour + White Print to a wide range of roll to roll and rigid medias up to 2" LED cold cure technology Includes tabl...

2012 EFI VUTEk QS2 Pro

• Manufacturer: EFI
• Model: QS2 PRO

- CMYKlclmW configuration - Very good used condition with great jet test - Been very well maintained with a clean belt - Can be demo'd - Comes with tables (front and rear) - Transformer included (if required) - F...

2012 EFI VUTEk QS3 Pro

• Manufacturer: EFI
• Model: QS3 PRO

- Very good working condition - Refurbished belt and very good quality - 3.2 metre hybrid - roll to roll and flatbed media - 6 colour + White configuration - Machine can be demonstrated - Installation labour and ...

EFI VUTEk Ink Pump 45104690

• Manufacturer: EFI

- ASM,PUMP,KNF,INK,W/32CM WIRE,TERMINALS - Suitable for EFI VUTEk 16H, H1625 - Part number 45104690

EFI VUTEk H1625 Wiring loom

• Manufacturer: EFI

EFI VUTEk Bulk ink filter capsule 45087559

• Manufacturer: EFI

- 6 micron black Small Capsule Filter - Suitable for EFI VUTEk & Agfa Jeti printers - Specifications - Type: Small Capsule Filter - Removal rating: 6 micron - Connector type: Luer lock - Maximum Operating Tempera...

EFI VUTEk UV Lamp Shutter Assembly - Parts

• Manufacturer: EFI

EFI VUTEk QS / QS Pro - Dichroic coated UV lamp shutter system kit. Typically includes: Shutter Arms and solenoid Shaft Reflectors Microswitches Bearings, clamps, washers Solenoid shutter activation cable

EFI VUTEk Compliance Chamber Damper for GS series - 45093264

• Manufacturer: EFI

Damper is suitable for EFI VUTEk GS Series printers. This is a high quality generic damper that corresponds to EFI part number 45093264. VUTEk GS2000 VUTEk GS2000 Pro VUTEk GS2000LX VUTEk GS2000LX Pro VUTEk ...

EFI VUTEk FILTER, 20 MICRON LUER SIMRIZ - 45072843

• Manufacturer: EFI

EFI VUTEk GS Series shim carriage height SACO - 45069429

• Manufacturer: EFI

- Suitable for EFI VUTEk GS series printers - OEM part number 45069429

EFI VUTEk 6 micron last chance ink filter 45080375

• Manufacturer: EFI

- EFI VUTEk part number 45080375 - 6 micron white Last Chance Filter (LCF) is suitable for solvent & UV inkjet printers. - PALL part that corresponds to original Mutoh Rockhopper bulk ink system filter. - Specifi...

EFI VUTEk COUPLING, INK WGHT SENS SMRZ SEAL SAC

• Manufacturer: EFI

- Original EFI part - Part No; 45077361 - Plastic - Can offer new part, or used parts at discounted rate Suits all models as below - GS2000 - GS2000 Pro - GS2000LX - GS2000LX Pro - GS3200 - GS3250 - GS3250 Pro ...

EFI VUTEk DEGASSER, 2X6, RADIAL FLOW, QD, QFTREZ - 45148477

• Manufacturer: EFI

This Membrane Contactor is suitable for Vutek GS3250 LX, GS2000 Pro-TF and GS 5500 LXR printers. Original EFI Vutek part number - 45148477.

2012 EFI VUTEk GS3250r

• Manufacturer: EFI
• Model: GS3250R

- 6 colour - Rip included - 3.2m roll printer - One owner from new - Was around £300k as a brand new purchase in 2012 - Seller confirms a good operational condition - Jet test photos taken August 2025 - Available...