Used proofing chamber

Walk in Explosion-proof Chamber (Auxiliary Equipment)

This Walk in Explosion-proof Chamber is mainly used to test the safety performance of lithium ion battery, battery pack. Prevent test operators and other test equipment from being burned and exploding. At the sam...

Walk in Chamber for Sand Dust-proof Test

Application Providing a simulated environmental of dry sand blowing and dust emission. Long time and continuous running without fault. Ensure a certain amount of dust blowing, dust blowing speed, dust blowing tim...

Temperature Cycling Test Chamber

IEC 62133-2017 UL 1642 UN 38.3 External dimension: W750xH1780xD1500mm | Temperature range: -70℃~+150℃（Adjustable） | Humidity range: 20%RH-98%RH (details see temperature humidity control diagram). | Temperature fl...

Altitude Simulation Test Chamber

IEC 62133-2017 UL 1642 UN 38.3 Structure: All-in-one structure, door with explosion-proof lock and explosion-proof chain | Temperature range: Room temperature | Display mode: PLC touch screen display (7-inch touc...

Heavy Impact Test chamber

DGBELL’s battery impact tester tests the safety of the battery through different weights, different heights and different impact areas. After a series of tests on this battery impact tester, the battery must not ...

Temperature Cycling Test Chamber

Standards IEC 62133 UN 38.3 UL 1642 Effective volume: 1000L | Internal dimension: W1000 X H1000 X D1000mm (Can be customized） | External dimension: W1200 X H2250 X D2400mm(including the motor height for the top o...

Thermal Abuse Test Chamber (Test Cells)

IEC 62133-2017 UL 1642 GB 31241-2014 1.Relevant standard test requirements Single battery safety test The heating test is carried out as follows: The single battery is charged according to the method of 6.1.3 Put...

Double-deck High and Low Temperature Test Chamber

Application Double-deck High Low Temperature Test Chamber provides a constant high and low temperature environment condition ranges from -40°C to 150°C (Available for customized design). It is widely used to test...

Double-deck Burn-in Chamber (Temperature Aging Test)

Double-deck Burn-in Chamber Standard IEC 60068-2-2:2007

Thermal Runaway Test Machine

Thermal Runaway Test Machine Standards UL 2580 IEC 62619 Relevant standards requirement Test objects: The test object is the whole vehicle or the complete vehicle-borne ion battery system or the subsystem of the ...

Battery Overcharge Overdischarge Explosion Proof Chamber Multilayered

• Manufacturer: Gaoxin

Battery Overcharge Overdischarge Explosion Proof Chamber Multilayer Battery explosion proof tank for the over-charge and forced discharge GX-FB-8S The tester is mainly used for the test of over-charge and over-di...

Battery Overcharge Overdischarge Explosion Proof Chamber Multilayer

• Manufacturer: Gaoxin

Battery explosion proof tank for the over-charge and forced discharge GX-FB-8S The tester is mainly used for the test of over-charge and over-discharge. Put the sample battery into the tank and connect to the cha...

Explosion Proof Protection Explosion Proof Test Chamber For Battery Testing Equipment

• Manufacturer: Gaoxin

Battery explosion proof tank for the over-charge and forced discharge GX-FB-8S The tester is mainly used for the test of over-charge and over-discharge. Put the sample battery into the tank and connect to the cha...

AC220V Multi Layer Explosion Proof Chamber For Automobile Battery

• Manufacturer: Gaoxin

Battery explosion proof tank for the over-charge and forced discharge GX-FB-8S The tester is mainly used for the test of over-charge and over-discharge. Put the sample battery into the tank and connect to the cha...

Safety Durable Battery Discharge And Overcharge Explosion Proof Chamber

• Manufacturer: Gaoxin

The tester is mainly used for the test of over-charge and discharge. Put the sample battery into the tank and connect to the charge and discharge tester to ensure the safety of the operator. 1. Each test box size...