Processing » Elektror » Germany

Building Filters

8

Used Elektror Processing in Germany

Trusted Seller
Centrifugal fan 0.37 kW 2800 rpm from Elektror - D-06/S 484 33868
- Manufacturer: Elektror
radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower
Wiefelstede, Germany
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 5 m³/min 1.0kPa 2750 rpm 220/380V 3AC 50Hz IP44 Bolt circle diameter: 96 mm, 4x bore: Ã 10.2 mm used, checked !
$327 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 7.0 m³/min 1.765 kPa (180 mmWs) 2800 rpm 220 /380 V 3 AC 50 Hz Bolt circle diameter: 112 mm, 4x bore: Ã 11.2 mm used, tested!
$420 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fans, centrifugal blowers, belt-driven centrifugal high-pressure fans ELEKTROR Karl W. Müller V-belt pulley (fan): diameter: Ã 80 mm, 2 grooves, groove width: 10 mm Engine : ATB, FLENDER, LOHER Type: ...
$490 USD
Zschepplin, Germany
Trusted Seller
Elektror radial fan
- Manufacturer: Elektror
radialtyer, radial blade, radial high-pressure fan with strap drive Karl W. Müller V -belt pane (luteert): Diameter: ã 95 mm V -belt pane (engine): Diameter: ã 154 mm Engine: Sintec A3-112M2-21 4.0 kw 2910 rpm 40...
$513 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial fans ELECTRONICS Karl W. Müller 2850 rpm 220/380 V 3 AC 50 Hz IP44 used, checked!
$338 USD
Zschepplin, Germany
Trusted Seller
Centrifugal fan
- Manufacturer: Elektror
Flow rate: 27 m³/h | Total pressure differential: 8500 Pa | Engine speed: 5600 rpm | Power: 3,0 kW | Current: 10,9 / 6,3 A | Voltage: 230 / 400 V | Frequency: 95 Hz
Freising, Germany
Side channel blower Elektror HDN 1|5 (high pressure g 1258085
- Manufacturer: Elektror
Machine infoSide channel blower (high pressure blower) Elektror model HDN 1|5 Used machine ATTENTION: - NOT suitable for chip extraction - only for conveying air at high pressure - e.g. for vacuum Air capacity 5m...
Kempten, Germany