Processing » Elektror

Building Filters

25

Used blower

Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 7.0 m³/min 1.765 kPa (180 mmWs) 2800 rpm 220 /380 V 3 AC 50 Hz Bolt circle diameter: 112 mm, 4x bore: Ã 11.2 mm used, tested!
$420 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fans, centrifugal blowers, belt-driven centrifugal high-pressure fans ELEKTROR Karl W. Müller V-belt pulley (fan): diameter: Ã 80 mm, 2 grooves, groove width: 10 mm Engine : ATB, FLENDER, LOHER Type: ...
$490 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 5 m³/min 1.0kPa 2750 rpm 220/380V 3AC 50Hz IP44 Bolt circle diameter: 96 mm, 4x bore: Ã 10.2 mm used, checked !
$327 USD
Zschepplin, Germany
Trusted Seller
Elektror radial fan
- Manufacturer: Elektror
radialtyer, radial blade, radial high-pressure fan with strap drive Karl W. Müller V -belt pane (luteert): Diameter: ã 95 mm V -belt pane (engine): Diameter: ã 154 mm Engine: Sintec A3-112M2-21 4.0 kw 2910 rpm 40...
$513 USD
Zschepplin, Germany
Trusted Seller
Centrifugal fan 0.37 kW 2800 rpm from Elektror - D-06/S 484 33868
- Manufacturer: Elektror
radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower
Wiefelstede, Germany
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, Australia
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, Australia
ELEKTROR SD-42
- Manufacturer: Elektror
Side channel blower. 3 Phase 1.3kW 220/380V 2800RPM 220mbar 2.8m³/min 1 inch inlet and 2 inch outlet Runs Well
Melbourne, Australia
Elektror Karl W. Müller Side channel blower 443835 SD-4
- Manufacturer: Elektror
Power: 0.75 Kw / 50 Hz / 3.2 / 1.85 A. | Rpm: 2820 | Connections: 220/380 V
Ederveen, Netherlands
Side channel blower Elektror HDN 1|5 (high pressure g 1258085
- Manufacturer: Elektror
Machine infoSide channel blower (high pressure blower) Elektror model HDN 1|5 Used machine ATTENTION: - NOT suitable for chip extraction - only for conveying air at high pressure - e.g. for vacuum Air capacity 5m...
Kempten, Germany

12