Building Filters

Used Elektror Blowers

Trusted Seller
Elektror 10 HP 480 Volt Air Knife Blower AK2057
- Manufacturer: Elektror
Watlow Heat Element. SN: D24SX5X. 480 Volt, 036 KW. Filtered Inlet. Stainless Steel Heater. Thermal Couples. Originally Used For Drying Section of Parts Washer. Elektror 10 HP 480 Volt Air Knife Blower AK2057
$3,500 USD
Sparta, MI
Trusted Seller
2017 ELEKTROR Stainless Steel Radial Ventilator/fan
- Manufacturer: Elektror
Unused Elektror stainless steel radial ventilator/fan directly drive by Hoyer 55kW/400V/2975rpm el. motor. Air output 18 000 m3/hour. Max. static pressure 7000 Pa. Max. temperature 55 deg. C. New 2017. 6 identica...
Hainesport, NJ
Trusted Seller
2017 ELEKTROR Stainless Steel Radial Ventilator/fan
- Manufacturer: Elektror
Unused Elektror model CFM1 500-D3-LG315-200L stainless steel radial ventilator/fan directly drive by Hoyer 30kW/400V/2960rpm on 50Hz (suitable for 60Hz too) el. motor. Air output 15 840 m3/hour. Max. static press...
Hainesport, NJ
Trusted Seller
ELEKTROR TYP SD BLOWER 7.00 KW 50 HZ 2890 MIN-1 400 V 14.5 A T146125
- Manufacturer: Elektror
50Hz 2890min 400V 14.5A; Extra Information Brand: ELEKTROR MPN: Typ SD HP: 7 1/2 HP Shipping Weight: 290 LBS Shipping Dimensions: 32 (in) × 24 (in) ...
$599 USD
El Paso, TX
Elektror 10 HP 480 Volt Air Knife Blower AK2057
- Manufacturer: Elektror
Material: Aluminum | Hp: 10 | Volts: 480 | Inlet-in: 8 | Outlet-in: 6 | Oad: 75"L x 36"W x 32"H | Rpm: 3530 | Phase: 3 | Stock location: E15C
$3,500 USD
Oceanside, CA
Trusted Seller
ELEKTROR RD14 405/574023 BLOWER 3 MOT EN 60034-1 IP 54 W-KI F 60 HZ 3350 MIN M1282
- Manufacturer: Elektror
Tested good Extra Information Brand: ELEKTROR MPN: RD14 Alternative Part Number: 405/574023 HP: .30 KW Voltage: 230/460 VAC Shipping Weight: 35 LBS Shipping Dimensions: 26 (in) × 2...
$250 USD
El Paso, TX
Trusted Seller
Blower with 4" inlet and 4" outlet brand ELEKTROR
- Manufacturer: Elektror
Blower with 4" inlet and 4" outlet brand ELEKTROR Technical characteristics manufacturer: Karl Müller Electrical power: Physical characteristics Robust metal housing Blue color Scroll-type design Rectangular outl...
Hermosillo, Mexico
Trusted Seller
ELEKTROR SD-8 side channel blower 9m3/min 300 mbar - 5.5 kw
- Manufacturer: Elektror
Motor 5.5 kW 2880 rpm 3 x 380 V Overtall dimensions: 950 x 500 x H. 530 mm | Technical documentation: File 1 | Stock: 1
Wormhout, France
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 5 m³/min 1.0kPa 2750 rpm 220/380V 3AC 50Hz IP44 Bolt circle diameter: 96 mm, 4x bore: Ã 10.2 mm used, checked !
$325 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fan, centrifugal blower, centrifugal fan ELEKTROR, KARL W. MÃLLER 7.0 m³/min 1.765 kPa (180 mmWs) 2800 rpm 220 /380 V 3 AC 50 Hz Bolt circle diameter: 112 mm, 4x bore: Ã 11.2 mm used, tested!
$418 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR centrifugal fan
- Manufacturer: Elektror
Centrifugal fans, centrifugal blowers, belt-driven centrifugal high-pressure fans ELEKTROR Karl W. Müller V-belt pulley (fan): diameter: Ã 80 mm, 2 grooves, groove width: 10 mm Engine : ATB, FLENDER, LOHER Type: ...
$487 USD
Zschepplin, Germany
Trusted Seller
ELEKTROR radial fan
- Manufacturer: Elektror
Radial fans, radial blowers, radial fans ELECTRONICS Karl W. Müller 2850 rpm 220/380 V 3 AC 50 Hz IP44 used, checked!
$337 USD
Zschepplin, Germany
Trusted Seller
Elektror radial fan
- Manufacturer: Elektror
radialtyer, radial blade, radial high-pressure fan with strap drive Karl W. Müller V -belt pane (luteert): Diameter: ã 95 mm V -belt pane (engine): Diameter: ã 154 mm Engine: Sintec A3-112M2-21 4.0 kw 2910 rpm 40...
$511 USD
Zschepplin, Germany
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Diam Unit is a bare shaft side channel blower. Unit never commissioned. As new
Sydney, Australia
Elektror SD9-1 Blower - Side Channel
- Manufacturer: Elektror
Side Channel Blower, Elektror, SD9-1, IN/OUT: 75mm Dia Unit is a skid mounted side channel blower. Driven by approx. a 11 Kw, 415 V electric motor.
Sydney, Australia