Used Material Handling Attachments in Saxony, Germany

PAGUS material stand

• Manufacturer: Pagus

Material stand Stainless steel PAGUS 600 x 550 x 1320 mm Height adjustable from 1000 - 1230 mm in 6 steps (shelf surface horizontal) 4x swivel castor, 2x with parking brake with antistatic device used, tested !

Double heavy duty castors rigid 250 mm #B12663

• Manufacturer: Continental | Vorwerk

Base plate approx. 260 x 260 mm total height approx. 310 mm double heavy duty wheels heavy duty wheels 250/60-190 used hole spacing approx. 180 x 180 mm weight each approx. 23 kg 12 pieces available (2x Vorwerk, ...

BLUME pallet turning device

• Manufacturer: Pagus

Pallet turning device BLUME 2 x 1000 kg for Euro pallets 360° rotatable with locking at 0° and 180

PAGUS solid rubber wheel

• Manufacturer: Pagus

Solid rubber wheel, with rim, 5 pieces PAGUS СККИ-ЗЕБРА 2x 630 - 220 - 480 Rim diameter: Ø 480 mm, rim width: 220 mm Bolt circle diameter: Ø 275 mm, 8x bore: Ø 27.5 mm 3x 630 - 200 - 480 Rim diameter: Ø 480 mm, r...

PAGUS Lifting magnet

• Manufacturer: Pagus

Lifting magnet, permanent lifting magnet PAGUS used, tested !

VEM Lifting magnet

• Manufacturer: VEM

Lifting magnet, lifting magnet VEM LB 3 x 8 ( LB3x8 ) TGL 10273 220 V DC voltage used, tested !

SERMETO chip conveyor

• Manufacturer: SERMETO

Chip conveyors, scraper belt conveyors SERMETO J 3721 01, 8400 x 450 13 rpm 220 / 380 V used, tested ! (2 pieces available, motor left or right)

TECNOMAGNETE Lifting magnet

Lifting magnet, Lifting magnet, Permanent lifting magnet TECNOMAGNETE MAXX 1500 used, tested !

PAGUS heavy-duty swivel castors

• Manufacturer: Pagus

Heavy duty swivel castors PAGUS with parking brake Panel thickness 18 mm Distance (hole center - hole center) 175 mm New ! Without brake S359

Günzburger Steigtechnik stationary crossing

• Manufacturer: GÜNZBURGER ACCESS TECHNOLOGY

Stationary transition, stationary step-over GÜNZBURGER ACCESS TECHNOLOGY 3720 x 960 x 2310 mm handrail installed on both sides with knee rail, height: 1100 mm aluminum grooved used, tested ! Dimensions ( assemble...

EUROLINE stationary transition

• Manufacturer: Pagus

Stationary transition, stationary step-over EUROLINE 512 Size 6 5126306 DIN EN ISO 14122 Handrail installed on both sides with knee rail, height: 1100 mm aluminum grooved used, tested ! Dimensions ( assembled, le...

STEINERT Lifting magnet

• Manufacturer: Steinert

Lifting magnet, electric lifting magnet, battery lifting magnet STEINERT ELECTROMAGNET CONSTRUCTION SBM24 used, tested !

JUNGHEINRICH drum gripper

• Manufacturer: Jungheinrich

Drum gripper , hot-dip galvanized JUNGHEINRICH for picking up one or two rolling hoop or beaded drums or plastic L-ring drums used, tested !

TECNOMAGNETS - maxX - Lot of lifting magnets (2x)

Load capacities 300/1000

FLAIG - FX 2000 - Lifting magnet

FLAIG - FX 2000 - Lifting magnet