- Trusted Seller
2005 2005 MAXXTURN 65 CNC Lathe w/ EMCO LM1200 Bar Feeder and Tooling – Metalworking Lathes (Metal) – 39 hp, 24 ", 400 volts, 3-phase
- Manufacturer: Emco
- Model: MAXXTURN 65
- Phase type: Three-phase
Main Spindle Horsepower: 39 hp | Swing over ways: 24 " | Voltage: 400 volts | Phase: 3-phase | Made in: AUSTRIA | Max. amps: 85 A | Power on time: 40729 hrs | Operating time: 38 hrs | Cutting time: 1528 hrs | Tra...
- Trusted Seller
1995 EMCO EMCOTURN 465 #81797
- Manufacturer: Emco
- Model: EMCOTURN 465
- Spindle bore: 73 mm
SPECIFICATIONS: CARRIAGE: LONGITUDINAL TRAVEL (Z-AXIS) LINKS 270 MM 10.6 in LONGITUDINAL TRAVEL (X-AXIS) LINKS 235 MM 9.3 in CARRIAGE: LONGITUDINAL TRAVEL (X-AXIS) RECHTS 235 MM 9.3 in CROSS TRAVEL (X-AXIS) RECHT...
Ames, IA - Trusted Seller
2003 EMCO HYPERTURN 665
- Manufacturer: Emco
- Model: Hyperturn
Bar feeder: KAMA 4265 mm | Max. turning diameter: 430 mm dia. | Max. turning dia o/slide: 600 mm dia. | Turning length: 644 mm | Dist. between spindels: 975 mm | Main motor power: 21/29 kw | Main spindle speed ...
Næstved, Denmark - Trusted Seller
2002 EMCO HYPERTURN 665 MC PLUS
- Manufacturer: Emco
- Model: Hyperturn
Max. turning diameter: 430 mm dia. | Max. turning dia o/slide: 600 mm dia. | Dist. between spindels: 975 mm | Turning length: 744 mm | Boring trough drawing pipe: 65 mm dia. | Y axis: 100 +/- 50 mm | Main motor ...
Næstved, Denmark - Trusted Seller
2007 EMCO EmcoTurn E65
- Manufacturer: Emco
- Model: EMCOTURN E65
This EMCO EmcoTurn E65 was manufactured in 2007. It features a swing over bed of 600 mm, a maximum turning diameter of 310 mm, and a bar capacity of 65 mm. Equipped with a Siemens Sinumerik 810D control, it offer...
Germany - Trusted Seller
CNC EMCO Turn E45
- Manufacturer: Emco
- Model: E45
CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21
Germany - Trusted Seller
2011 EMCO CNC EMCO Turn E45
- Manufacturer: Emco
CNC EMCO Turn E45 machine with Siemens console + IEMCA bar feeder Boss 545/21
Germany - Trusted Seller
2004 EMCO TURN 332 MCPlus
- Manufacturer: Emco
This 4-axis EMCO TURN 332 MCPlus was manufactured in 2004. It features a CNC lathe with dual spindles capable of speeds up to 6300 and 7000 rpm respectively, and two 12-slot tool turrets. Includes high-pressure c...
Germany - Trusted Seller
2005 Emco Hyperturn 665 MC Plus
- Manufacturer: Emco
- Model: Hyperturn
- Spindle bore: 73 mm
Equipped with: 6-Axis, CNC Twin Spindle, Twin Turret, Turning Centre. 2 x Spindles with C-Axis. 2 x Tool turrets with live/driven tooling. Main spindle with collet chuck for 65 mm bar. Counter spindle with 3-jaw ...
Celle, Germany - Trusted Seller
2006 EMCO TURN 332 MCPlus
- Manufacturer: Emco
This 4-axis EMCO TURN 332 MCPlus was manufactured in 2006. It features a CNC lathe with a drive power of 10 KW, main spindle speeds up to 6300 rpm, and counter spindle speeds up to 7000 rpm. Equipped with two 12-...
Germany - Trusted Seller
2007 EMCO Hyperturn 665 MC Plus
- Manufacturer: Emco
- Model: Hyperturn
- Spindle bore: 73 mm
The machine is in good technical condition and can be tested. Hydrobar bar feeder.
Brno, Czech Republic - Trusted Seller
EMCO HYPERTURN 665 TWIN SPINDLE TWIN TURRET WITH BARR FEDER FULL DRAWER OF TOOLS
- Manufacturer: Emco
- Model: Hyperturn
MACHINES COMES FROM DOOR MANUFACTURER, IT CUTS ONLY SOFT BRASS MACHINE DATA : MACHINE HAVE FULL EQUIPMENT - FULL DRAWER WITH TOOLS - LONG IEMCA BARR FEEDER - ALL TOOLS MOUNTED ON BOTH TURRETS - CONVENYOR FOR ...
Slovenia - Trusted Seller
2014 EMCO MaxxTurn 65 SMY
- Manufacturer: Emco
- Model: MAXXTURN 65 SMY
This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and...
Germany - Trusted Seller
2006 Emco MCP 100-50
- Manufacturer: Emco
2006 Emco MCP 100-50 The EMCO MCP 100-50 is a CNC milling machine that is equipped with two pallets. This configuration enables precise machining of workpieces while the second pallet can already be re-clamped. ...
Linz, Austria 
EMCO Turn 425
- Manufacturer: Emco
Country of production: Austria | Control: Siemens Sinumeric 810 | Counter spindle: x2 | Rod magazine-feeder: 3m | Head: 2 x 12 items | Fixing the tool: VDI 16 | Max. spindle rpm: 5000 | Pick-up of the finished p...
Tip: Enter manufacturer, model or keyword