Used EDM Machines

Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL
Trusted Seller
Auction
1999 Makino Edge 2-A2-4MR Electrical Discharge Machine (EDM) Ram Type, Makino MGH5 CNC Control Panel...
- Manufacturer: Makino
- Model: EDGE2
1999 Makino Edge 2-A2-4MR Electrical Discharge Machine (EDM) 289 Ram Type, Makino MGH5 CNC Control Panel, 3.75" x 19.75" T-Slot Table, Learning Tablet Working Condition Unknown - The running and operating conditi...
Saginaw, MI
Visit Auction Website
Trusted Seller
15 KVA CAMMANN “C76A” METAL TAP DISINTEGRATOR w/360-DEGREE ARM & HEAD ROTATION - POWER HEAD FEED
- Manufacturer: Cammann
- Model: C-76
#C76A CAMMANN METAL/TAP DISINTEGRATOR SERIAL NO 102186, MODEL C76A Imperial Metric EQUIPPED WITH: #CMBL CAMMANN HEAD & HEAD HOUSING CAMMAMATIC HEAD FEED 25 GALLON BUILT-IN COOLANT SYSTEM CATALOG SPECIFICATIONS: A...
$2,450 USD
Cincinnati, OH
Trusted Seller
Auction
2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) 22" x 27" Work Table, 34" x 30" x 24" Diel...
- Manufacturer: Makino
- Model: Duo43
2010 Makino DUO43 Wire Electrical Discharge Machine (EDM) W120110 22" x 27" Work Table, 34" x 30" x 24" Dielectric Well, 12" x 18" XY Travels, Auto Wire Feed, Wire Recovery System, Pendant, Makino MGN-SG Controll...
Saginaw, MI
Visit Auction Website
EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: - This machine can by run unattended by nc programming or can run manually with XY handles - Digital Readouts X, Y & Z - Glass Scales X, Y & Z | Hole-dia. (min): 0.004 in | Hole-dia. (max): 0.157 ...
Oak Park, IL
Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D
- Manufacturer: Agie - Charmilles
“Used item as seen in the images. 30 day warranty included.” Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D 7-ZZ6H-72209-CS
$576 USD
Baroda, MI
Trusted Seller
Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM
- Manufacturer: Como Filtration
Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...
$4,275 USD
Millersburg, IN
Trusted Seller
NEC EHV-163-238670 Power Supply Circuit Board Unit Makino EDM CNC
- Manufacturer: NEC
Used, In Working Condition. Removed From a Working Environment. *Dusty From Storage* One Ceramic Insulator Missing Between Shunt on Back End. If this item ships as Flat Rate Freight please see details in Shippin...
$840 USD
Millersburg, IN
Trusted Seller
1998 Brother HS5100 Wire Electrical Discharge Machine
- Manufacturer: Brother
Brother HS5100 Wire Electrical Discharge Machine (1) Complete for parts machine & a 2nd identical machine that has been parted out -- parts on pallet for the 2nd machine
Toledo, OH
Trusted Seller
Mitsubishi DWC-90Ha Edm, Not Operational
- Manufacturer: Mitsubishi
- Model: DWC-90
Cornelius, NC
Elox 8-2012-DR Sinker EDM Machine
Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...
Posen, IL
2021 EDM DRILLMATE 22I
- Manufacturer: EDM DRILLMATE
Equipped with: 12 station electrode changer | Hole-dia. (min): 0.008 in | Hole-dia. (max): 0.118 in | X: 16.0 in | Y: 12.0 in | Z: 19.0 in | Work-w: 21.5 in | Work-l: 14.0 in | Cnc controlled: Yes
Oak Park, IL
Trusted Seller
Mitsubishi FA10M Submersible Wire Edm
- Manufacturer: Mitsubishi
- Model: FA10M
Cornelius, NC
1999 MITSUBISHI EDM EX-22
- Manufacturer: Mitsubishi
- Model: EX22
X: 20.0 in | Y: 16.0 in | Z: 14.0 in | Table size-w: 30.0 in | Table size-l: 22.0 in | Worktank inside dimensions: 37.4 x 26 x 16" | Max. workpiece weight: 2200 Lbs. | Drop tank: No | C-axis: Yes | Tool changer:...
Oak Park, IL
2003 MITSUBISHI EDM FA20
- Manufacturer: Mitsubishi
- Model: FA20
Equipped with: - Tooling shown on table not included. | X: 19.6 in | Y: 13.8 in | Z: 11.8 in | Max. workpiece dimensions: 31.5 x 23.6 x 8.5" | Max. workpiece weight: 1760 Lbs. | Auto threading (yes/no): Yes | Su...
Oak Park, IL
Agie - Charmilles CUT AM500 EDM machine
- Manufacturer: Agie - Charmilles
- Model: CUT AM500
Good condition Agie - Charmilles CUT AM500 EDM machines manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA