Used Machine Tools in Oregon, USA

Armstrong Bandsaw Sharpener, No. 2 Left Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong No. 2 Left Hand Automatic Bandsaw Sharpener. For saws up to 8" wide. Complete with a set of post brackets, motors, starters, and one set of standard cams. S/N 6375. Good condition. See photos of Ar...

New CROSSCUT SOLUTIONS Cut-Off Saw, Model CCS-18P Cut-Off Saw,

One New CROSSCUT SOLUTIONS Model CCS-18P Cut-Off Saw, (right or left hand models) pneumatically operated, 2" x 12" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3 phase, 60 cycles, includes magnetic starter with 11...

IMW Bandsaw Guide Dresser

IMW Bandsaw Guide Dresser. Currently equipped to dress NorPac style guides but could be modified to handle HOE, Salem, Cleerman, McDonough, or Corley bandsaw guides. Shop tested. See photos of Used IMW Bandsaw...

Armstrong Bandsaw, No. 6D Right Hand Double Cut Automatic Bandsaw

• Manufacturer: Armstrong

Armstrong No. 6D Right Hand Double Cut Automatic Bandsaw Sharpener. Late model S/N 10395. Includes side winder feed finger, double cut carriage, motors, and starters. Double cut post brackets and backfeeds incl...

Armstrong Bandsaw Sharpener, No. 6 Right Hand Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Late Model Armstrong No. 6 Right Hand Automatic Bandsaw Sharpener, S/N 12744, complete with full set of post brackets including automatic and this unit is equipped with Sequoia Saw Model CD 27 R Pneumatic Bandsaw...

Jacobsen Bandsaw Guide Dresser, (Simonds International) Bandsaw Guide Dresser, Model JM-100A Automat

• Manufacturer: Jacobsen

Jacobsen (Simonds International) Model JM-100A Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Adjustable guide fixture for guides up to 11" X 1-3/4" with variable a...

Jacobsen (Simonds International)Bandsaw Guide Dresser, Jacobsen JM-100A Automatic Bandsaw Guide Dre

• Manufacturer: Jacobsen

Jacobsen (Simonds International)JM-100A Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Adjustable guide fixture for guides up to 11" X 1-3/4" with variable angle. ...

SCM Model M2 Gang Ripsaw

• Manufacturer: SCM / SCMI

Used SCM Model M2 Gang Ripsaw 7-15/16" width cap. 4-1/2" max. depth of cut 23-9/16" throat depth Minimum board length: 14" 70mm arbor with two 20 mm x 5 mm keys for 12" to 14" dia. saw blades 36 HP motor main mot...

Armstrong Bandsaw Sharpener, Right Hand Pro-Filer Automatic Bandsaw Sharpener

• Manufacturer: Armstrong

Armstrong Right Hand Pro-Filer Automatic Bandsaw Sharpener for both Stellite and Swaged tooth saws. Built-in diamond wheel dresser. Variable speed motors for grinding wheel and saw tooth feed rate. Air clamp. ...

TREGARNE Wood Welder, Brand New

One (1) Brand New TREGARNE Wood Welder. See photos of TREGARNE Wood Welder on our web site. Inventory -187 .

Simonds Bandsaw Leveler, Automatic Bandsaw Leveler

One Used Simonds Automatic Bandsaw Leveler Model Optimatic RMO 942 built in 2001 (Built by Walter Oppliger-Switzerland for Simonds). 480 volts 60 hz. Last owner reports Leveler in excellent operating condition b...

New CROSSCUT SOLUTIONS Cut-Off Saw, Model CCS-18M Cut-Off Saw

One New CROSSCUT SOLUTIONS Model CCS-18M Cut-Off Saw, (right or left hand models) mechanically operated, 2" x 12" capacity, 7 1/2 HP motor, TEFC 230/460 volt 3 phase, 60 cycles, includes magnetic starter with 110...

Armstrong Bandsaw Leveler

• Manufacturer: Armstrong

Armstrong Bandsaw Leveler, S/N 20263. Automatic bandsaw leveler is 120V single phase, 50/60Hz. Unit is in excellent condition and can be demonstrated. Includes saw support extensions and operator's manual. See...

Armstrong Trim and Chop Saw Sharpener, Model No. 16 Automatic Trim and Chop Saw Sharpener

• Manufacturer: Armstrong

Armstrong Model No. 16 Automatic Trim and Chop Saw Sharpener. Handles saws from 8"- to 40"-diameter, speed of 34.8 teeth per minute, 1/4" to 2" tooth space, 1/4" to 1" tooth depth, 0- to 30� positive hook, 0- to...

Bandsaw Guide Dresser, Heavy Duty Automatic Bandsaw Guide Dresser

Heavy Duty Automatic Bandsaw Guide Dresser. 110V operation. Carbide cutter. Automatic table traverse. Inside light. 10" X 1-1/2" 90 degree fixture. Full enclosure. Excellent condition. See photos of Heavy ...

Ultramatic VB1VT Mass Finishing Machine

• Manufacturer: Ultramatic
• Model: VB1VT

Good condition Ultramatic VB1VT Mass Finishing Machines available between 2024 and 2025 years. Located in USA and other countries. Click request price for more information.