- Trusted Seller
Engel Equipment 68" Roller - H16hlb
- Manufacturer: Engel
Name: Roller | Arrival date: 10-06-2025 | Dimensions l x w x h (inches): 90 x 78 x 59 | Capacity: 68" | Weight (lb.): 4130 | Available quantity: 1
$679 USDEuclid, OH - Trusted Seller
ENGEL INDUSTRIES M-3510 #0747323
- Manufacturer: Engel
EQUIPPED WITH: LINEAR ENCODER FEED CONTROL ENTRY DRIVEN PINCH ROLLS FLYING PRE-CUT CUT OFF PRESS HAND HELD JOG PENDANT POWER REQUIREMENTS: 220 VOLT, 3 PHASE, 60 HERTZ MACHINE IS TOOLED TO MAKE 1/4" CHANNEL TOOLIN...
Toledo, OH - Trusted Seller
Engel Edgenotcher Model 750
- Manufacturer: Engel
Product Description Model Used Engel Edgenotcher Model 750 Category Notchers Voltage N/A Serial Number N/A Condition Used Comments N/A Sale Price Please Contact Us for information or for similar products.
Charlotte Hall, MD - Trusted Seller
Engel Cleatformer
- Manufacturer: Engel
- Model: Cleatformer
Used Engel Cleatformer with 20ga Male snaplock, 20ga Drive Cleat Rolls, 20ga S-cleat rolls, and 20ga 3-in-1 rolls. Electrics: 3phase/ 220/440volts. **All machines shown are subject to prior sale. If there is no p...
Lynchburg, VA - Trusted Seller
1993 Engel 5-20CTL-SC
- Manufacturer: Engel
Engel 5-20CTL-SC Shear and Straightener only, no coil handler
- Trusted Seller
Engel Cleatformer BFSTR
- Manufacturer: Engel
- Model: Cleatformer
Used Engel Cleatformer Model: BFSTR S/N 4451263 Electrics: 5HP, 3PH, 220/440 volts Accessories: 22 ga Male Snaplock 22 ga Pittsburgh Rolls 22 ga “S” Cleat Rolls **All machines shown are subject to prior sale. If ...
Lynchburg, VA - Trusted Seller
Engel Edgenotcher Model 750
- Manufacturer: Engel
Model Used Engel Edgenotcher Model 750 Category Voltage N/A Serial Number N/A Condition Used Comments N/A Sale Price Please for information or for similar products.
Charlotte Hall, MD 
E-CPU-186B/12 MHZ | Keba Engel E-CPU-186B D1633C-1 with D1711B E-HSI-M, E-HSI-RS232 D1714 - Used
- Manufacturer: Engel
$2,117 USDBaroda, MI
ENGEL DH-4616
- Manufacturer: Engel
Engel DH-4616 Duplex Roll Forming Machine Model DH-4616 S/N 52388-88 440V 3 phase power 10 HP motor 64 Rollers total- 32 on each side
- Trusted Seller
Engel Snaplock 24ga
- Manufacturer: Engel
- Model: Snaplock 24GA
Used Engel 24 gauge Snaplock Serial Number: 584166 Model: 300-5 Dimensions: 5x3x4 Motor: 5 Horsepower Electrics: 3 Phase Dual Volts 220/440 Includes: 24 gauge Male Snaplock Rolls only **All machines shown are sub...
Lynchburg, VA - Trusted Seller
Engel 1240 Transverse Connector
- Manufacturer: Engel
- Model: 1240
Used Engel Model 1240T transverse connector rollformer. Motor: 7.5HP; 3PH/230volts. 118″ x 29″ x 48″
Lynchburg, VA - Trusted Seller
Engel Cleatformer DC300
- Manufacturer: Engel
- Model: Cleatformer DC300
Used Engel Cleatformer serial number 591166 Model DC-300-5 22ga capacity 3 phase/220 volt Motor: 3HP 6′ x 2′ x 4′ Includes: 3 in 1 rollset 22ga drive cleat rolls 22ga female snaplock rolls **All machines shown ar...
Lynchburg, VA - Trusted Seller
10 Stand x 1-1/4″ x 36″ ENGEL Duplex Rollformer #1912
- Manufacturer: Engel
1912 ENGEL DH3510 4 122183 83 Adjustable Stock Guides, Entry & Exit (1) Material Center Support Width Dial Indicator Chain & Gear Driven Pendant Control 8′ x 8′ x 4′ 4,000 Lbs. Universal Warehouse, Perrysburg, Oh...
Perrysburg, OH - Trusted Seller
Engel Manual Feed Uncoiler
- Manufacturer: Engel
Product Description Used Engel Manual Feed Uncoiler Specifications: 4 spool coil feeder with spare spool Manual feed to powered pinch rollers Includes beading rollers 5ft coil width, 16ga mild steel capacity
- Trusted Seller
Engel Power Feed Uncoiler
- Manufacturer: Engel
Product Description Used Engel Power Feed Uncoiler Specifications: 4 spool coil feeder with spare spool Power feed to pinch rollers with skate tracks Includes beading rollers 5ft coil width, 16ga mild steel capacity
Engel TDF Bending & Forming
- Manufacturer: Engel
- Model: TDF
Good condition Engel TDF Bending & Formings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
