- Trusted Seller
2005 1650 Ton Engel DUO 23050/1650 US
used
- Manufacturer: Engel
2005 1650 Ton Engel DUO 23050/1650 US: Shot size: 470 Oz Tie bar spacing: 73.4" x 56.3" Wide platen. Platen size: 95.3" x 85.4" Max. Open daylight: 128" Hour meter reads: 9,886 Machine is under power and in...
United States 
United States- Trusted Seller
ENGEL 20300162 HYDRAULIC CYLINDER FROM ENGEL ES-2000/500 T148547
used
- Manufacturer: Engel
- Model: ES 2000
Warranty Information This is a used item, in good condition and includes a 30 day warranty. from Engel ES-2000/500
$325 USDEl Paso, TX 
1999 1650 ton Engel Duo machine for sale
used
- Manufacturer: Engel
405 oz, 1650 ton Duo machine for sale with very low hours. CC100 control
United States- Trusted Seller
2005 1000 Ton Engel DUO 11050/1000 WP (Wide Platen)
used
- Manufacturer: Engel
2005 1000 Ton Engel DUO 11050/1000 WP (Wide Platen): Shot size: 165 Oz Tie bar spacing: 55.1" x 45.27" Platen size: 78.7" x 72" Hour meter reads: 7,962 Machine is under power and in good running conditions.
United States - Trusted Seller
1997 750 Ton ENGEL ES 1000/750WP Injection Molding Machine
used
- Manufacturer: Engel
- Model: ES 750
1997 750 Ton ENGEL ES 1000/750WP Injection Molding Machine Shot size: 259 Oz Screw diameter: 140 mm Tie bar spacing: 45" x 45" Platen Size: 66.73" x 64.30" Max. Open daylight: 75.59" Control: CC100 Hours: ...
United States 
2007 1650 ton Engel Duo Combi machine
used
- Manufacturer: Engel
1650 US ton Engel Duo Combi machine. Like buying two machines in one, it has a second horizontal injection unit on the clamp side and a center die plate for two molds. CC200 control, 140 and 93 oz, Hy Robotics do...
United States
2007 1900 ton Engel Duo Combi machine
used
- Manufacturer: Engel
1900 US ton Engel Duo Combi machine. Like buying two machines in one, it has a second horizontal injection unit on the clamp side and a center die plate for two molds. CC200 control, 275 and 140 oz, Hy Robotics d...
United States
2014 Engel 50 ton Vertical-Vertical W/Rotary Table
used
- Manufacturer: Engel
50 ton Engel vertical rubber machine for sale, less than 1000 hours. Shot Size: 2.2 oz. | Screw Diameter: 25 mm | L/D: 24 | Table Diameter: 900 mm | Table Configuration: 2x180 degrees or 3x120 degrees | Min/Max M...
United States
2005 Engel 600 ton Two-shot, Two-Color Injection Molding Machine
used
- Manufacturer: Engel
Machine model 2550H/330L/610. Primary injection shot size is 38.72 oz, 2nd barrel is 5oz. 914x861mm tiebars, 850mm clamp stroke, multiple core pull, rotary table available, Yushin custom side entry robot.
United States
2005 Engel 450 ton Two-shot, Two-Color Injection Molding Machine
used
- Manufacturer: Engel
- Model: TG 2050H330L450
Model TG 2050H/330L/450. Multiple cores, 2013 MGS all-servo rotary platen, only 9000hours. 34.6" x 33.07" "B" tiebars, 48.8" x 47.24" platens, 27.5oz./3.7oz. Many options. Have a 610 two-color machine also availa...
United States- Trusted Seller
2022 310 Ton Engel e-motion 2440/310 T US All Electric Injection Molding machine
used
- Manufacturer: Engel
- Model: E-motion
2022 310 Ton Engel e-motion 2440/310 T US: All Electric Injection Molding machines Shot size: 29.64 Oz Screw diameter: 60 mm Tie Bar Spacing: 25.6" x 25.6" Platen Size: 38.2" x 38.2" Hours: 4,337 Control: ...
United States Lockformer High Speed Pittsburg machine- 20 ga, 100Feet per Min-Nice machine
used
- Manufacturer: Engel
“sold as is where Is” 508-581-9922 Buy, Sell, Trade, new and used metalworking machinery Trade, Consign, Repair For Sale- Lockformer High Speed Pittsburg 20ga capacity 100Feet Per minute pitch speed Freestanding ...
$3,995 USDSutton, MA- Trusted Seller
50 Ton 2.2 Oz Engel ES 200/50 VT TL TPE Injection Molder, 2004
used
- Manufacturer: Engel
- Model: ES 200
-Tonnage: 50 Ton -Oz Shot Capacity: 2.2 Oz -Platen Size: 30.5″ x 15.5″ -Screw Diameter: 25mm -Min Mold Height: 190mm -Opening Stroke: 400mm -Elector Stroke: 100mm -Electrical Requirements: 460V, 3P, 60Hz ...
2005 Engel DUO1150/1000 WP
used
- Manufacturer: Engel
Size: 1150 | Shot size: 165 oz. | Platen size: 72.83" x 71.25" | Dbtb: 55.11" x 45.27" | Daylight: Max 94.48" | Hko: Yes | Core pull: Yes
Valley City, OH
Engel E-motion Injection Molding
used
- Manufacturer: Engel
- Model: E-motion
Good condition Engel E-motion Injection Moldings available between 2001 and 2011 years. Located in Turkey and other countries. Click request price for more information.
Turkey
Tip: Enter manufacturer, model or keyword
