Used in Nagano, Japan

V-trough (VT) type FB2C-VT

• Manufacturer: Maruyasu Kikai

A standard stainless steel frame model optimized for food plant use. Cross-sections

SLS-H N1 Series

• Manufacturer: Maruyasu Kikai

SLS-H Transported objects placed on the slats are sorted at a high speed in 2 to up to 5 directions. Highest sorting capacity is 350pieces/minute. Standard Only Overview Product appearance Standard Equipment Key ...

MIT2 MINI Series

• Manufacturer: Maruyasu Kikai

MIT2 The table rotates. A standardized table with a diameter of 500 mm - 1,200 mm can be laid out as a pool yard of the assembly line. Standard Only Overview Product appearance Key to model number designations No...

GBC CLIP VEYOR Series

• Manufacturer: GBC

GBC A curved conveyor with a new drive system that turns the belt using magnets on either side of it. Standard Only Overview Product appearance Variation GBC Wide type CAD drawings Download CAD drawings GBC Drivi...

GM18H LESS VEYOR Series

• Manufacturer: Maruyasu Kikai

GM18H An eco-friendly roller conveyor with a magnet-based drive transmission system. Standard Only Overview Product appearance Driving concept Key to model number designations Note: Speed Nos. marked by an asteri...

SGA LESS VEYOR Series

• Manufacturer: Maruyasu Kikai

SGA Transporting thin objects which push the transported objects flowing down randomly to one side so as to align them. Standard Only Overview Product appearance Conveyors for transporting thin objects Our convey...

GA20H LESS VEYOR Series

• Manufacturer: Maruyasu Kikai

GA20H Randomly flowing transported objects are aligned in a single row in the center of the belt due. Standard Only Overview Product appearance Key to model number designations Note: Speed number * can only be se...

Meandering-less (VG) type FB2C-VG

• Manufacturer: Maruyasu Kikai

A standard stainless steel frame model optimized for food plant use. Transport weight Transport weight: Use the FB2C 50% as a guide. Cross-sections

Ideal for carrying loose objects V-trough (VT) type MMX300-VT

• Manufacturer: Maruyasu Kikai

An aluminum frame model for medium-weight loads. A V-shaped guide has been inserted into both sides of the belt to set the transfer surface in the bilge. Ideal for carrying loose objects. Product length Product l...

Hollow shaft motor Small-scale motive (SDH) type MKE1-SDH

A model with knife-edge rollers at the intake and output ends. Ensures smooth transfer of small loads. A conveyor with a short product length that uses a hollow shaft motor. There is no motor symbol as this is a ...

Transfer from a slope to the horizontal and vice-versa Upper horizontal (CF) type MMX300-CF

• Manufacturer: Maruyasu Kikai

An aluminum frame model for medium-weight loads. Transfer from a slope to horizontal and vice-versa without changing over using 1 machine. The slope angle can be adjusted from 0 to 45°. Product length Product le...

MRA1 MINI Series

• Manufacturer: Maruyasu Kikai

MRA1 A small-diameter roller conveyor for moving boxes and other relatively small loads. Standard Only Overview Product appearance Flat belt drive Key to model number designations Specifications *Rubber-covered r...

Standard (no symbol) type / meandering-less (VG) type MMX300 / MMX300-VG

• Manufacturer: Maruyasu Kikai

An aluminum frame model for medium-weight loads. Legs and stay pipe are optional. Non-meandering type (VG) which prevents meandering by attaching a crosspiece in the center at the back of the belt.

Shorter product length conveyor Small-scale motive (SD) type MMX300-SD

An aluminum frame model for medium-weight loads. The motive part is the smallest possible size. A shorter product length conveyor is possible. Product length Product length: 50~400cm Motor protruding dimension ta...

MTV MINI Series

• Manufacturer: Maruyasu Kikai

MTV A new concept of twisting the conveyor belt. Standard Only Overview Product appearance Key to model number designations Specifications Transported objects Power supplies and speeds Note: (1) The speed of the ...