Used in Nara, Japan

2005 NAGAOKA NLV1210S

• Manufacturer: Wyeth Lauder

Left to right (fixed in front) for both vacuum suction (direct stacking) and magazine rack Size M Specifications Rack mounting: 1 above / 2 below 1 in elevator Overall length: 1850mm Control No. NLM-N

2006 Kuraray RN-22

• Manufacturer: クラレ

Nitrogen generation rate: 30Nm3 (99.99%) Compatible compressor: 22Kw/30HP)

2014 Kuraray MR-11

• Manufacturer: クラレ

Nitrogen generation capacity: 20 Nm3 (99.99%) AC 100V/50/60Hz Compatible with 11 kW compressor Dimensions: 1000*1030*1750mm

2022 Kofloc N2 IMPACT II

• Manufacturer: コフロック

Generation Capacity: 6.8 Nm3 (99.99%) Compatible Compressor: Built-in Purity: 99.99% Power Consumption: 6.5 kW Dimensions: 1320 x 1000 x 1695 mm

2013 Atec NJ06-11M-82-RLF

• Manufacturer: エイテック

Right-to-left (front fixed) nitrogen reflow oven 8 heater zones (top and bottom) 2 cooling zones Maximum board width: 400mm Maximum board length: 500mm Warp prevention Automatic width adjustment Flux recovery Tot...

2015 Tamura TNV40-568EM

• Manufacturer: A-Tech

Left to right (front fixed) 8 zones, nitrogen type Board Max:400mm HDD-less PC Total length of equipment:5600mm Cooling chiller unit Temperature profile measurement & display function Temperature control rise: 29...

2010 Senju Metal SNR-825GT

• Manufacturer: 千住金属

Left to right (front fixed) nitrogen specification, Heater: 8 zones Cooling: 1 zone (705mm) Substrate width: 50 to 250 mm Chiller unit Unit: 5200*1240*1460mm

2022 Kuraray MR-22

• Manufacturer: クラレ

Nitrogen generation capacity 40Nm3(99.99% ) AC100V/50/60Hz 1700*100*1700mm

2012 Tamura TNV25-508EM

• Manufacturer: Antom

Left to right (front fixed) nitrogen type. 8 zones, (Atmospheric type can be used. Air supply) Substrate Max: 250mm With anti-sledging 20mm on top of parts / 30mm on bottom of parts HDD-less PC External monitorin...

2022 Kobelco SG22AD IV

• Manufacturer: コベルコ

Output: 22Kw (30HP) Blowing pressure 0.75Mpa Air volume: 4.15m3/min Power supply・・・200V/220V/60Hz Operating time・・・8,981H

2006 Hitachi OSP-37V6AII

• Manufacturer: 日立

Motor: 30kw/60HP 200V 60Hz Press: 0.68MPa Inverter specifications Screw type compressor

2010 NAGAOKA NMC-250E

• Manufacturer: ナガオカ

Left to right (front fixed) Inline Laser marking on board top surface Laser body (SUNX LP-400) Substrate:Max250×330mm XY axis stage movement, reading function 48w, wavelength 10.6μm, class 4

Meisho MS-9000S

• Manufacturer: メイショウ

Pb-free Applicable substrate: 330*250mm XY table movement: X300*150mm TFT color monitor: 10 inches, touch panel

2000 NAGAOKA NUS2310E

• Manufacturer: ナガオカ

Left to right (front fixed) M size Rack standby - top 2/bottom 3 S/N: 070114-03 Management No:

Panel for IC-7000