Building Filters
Long Gauge Length Axial Extensometers – Model 3542L
- Manufacturer: Epsilon
Long gauge length extensometers with gauge lengths greater than 2 inches (50 mm) for tensile and compression testing. These units have been specially designed for long gage length applications where low level str...
Jinan, China
10V Calibration Reference Module – Model VREF
- Manufacturer: Epsilon
Like the shunt calibration module for strain gaged extensometers, the VREF module is used to transfer Epsilon’s calibration to a customer’s electronics. Calibration only requires these simple steps: 1. With the V...
Jinan, China
Bi-Axial or Axial Averaging Extensometers – Model 3560
- Manufacturer: Epsilon
This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...
Jinan, China
Miniature Axial Extensometers – Model 3442
- Manufacturer: Epsilon
Weighing as little as 8 grams, these miniature extensometers are designed to have very low operating force with minimal specimen influence. All use an improved version of Epsilon’s dual flexure design which makes...
Jinan, China
Rugged, Long Gauge Length Extensometers – Model 3543
- Manufacturer: Epsilon
With over 15 years of proven reliability in the world’s most demanding testing environments, the Model 3543 extensometer is designed to survive in those applications where standard axial extensometers would not. ...
Jinan, China
Miniature Averaging Axial Extensometers – Model 3442RA1
- Manufacturer: Epsilon
With gauge lengths of 1 and 2 inches (25 and 50 mm) and measuring ranges of 0.050 and 0.100 inches (1.2 and 2.5 mm), the Model 3442RA1 was designed for applications where tensile or compressive strength tests on ...
Jinan, China
Digital Extensometer Interface – Model DSCUSB
- Manufacturer: Epsilon
Provides an inexpensive solution for digitally recording extensometer output. The DSCUSB is a signal conditioner that provides a digital interface to a computer via USB. This allows direct data capture without th...
Jinan, China
Very High Resolution Digital Electronic Calibrators – Model 3590VHR
- Manufacturer: Epsilon
The 3590VHR uses a coarse adjustment screw for large displacements, coupled with a fine adjustment screw that allows fine adjustment to within approximately 0.025 microns (about 1 micro inch). When it comes time ...
Jinan, China
Bi-Axial or Axial Averaging Extensometers – Model 3560
- Manufacturer: Epsilon
This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...
Jinan, China
Diametral Extensometers for Rock and Concrete Testing – Model 3975
- Manufacturer: Epsilon
Designed for accurate measurement of small diametral strains such as those required to determine Poisson’s ratio of rock, concrete and asphalt samples. The units are designed to be used in conjunction with the Mo...
Jinan, China
High Temperature Axial Torsional Extensometers (1200°C or 1600°C) – Model 7650
- Manufacturer: Epsilon
Model 7650 extensometers are primarily used on round specimens tested in bi-axial test machines capable of simultaneous axial and torsional loading. All models are capable of bi-directional displacement in both a...
Jinan, China
High Temperature, Low Strain, Extended Performance Capacitive Extensometers
- Manufacturer: Epsilon
Model 7650A extensometers measure strains with extremely high precision due to their design features and low strain range. All models are capable of tension and compression strain measurement, and may be used for...
Jinan, China