Used processing

Rising/Falling Film Evaporator Stainless Steel 321 - IPP# 220593

• Manufacturer: Pitton-Gessner/Germany

1.4541/1.0425 SS falling film evaporator 215 l in the tubes, -1/9bar@250 ° C, 500 l in the shell

Rising/Falling Film Evaporator 12 kg/h (26.5 lb/h) Stainless Steel Austenitic - IPP# 220572

• Manufacturer: Kleiser Gmbh

1.4571/HII falling film evaporator carbon steel shell internal; -1/9 bar @ 250 ° C jacket, internal 1291 l, jacket 1.020 l

Rising/Falling Film Evaporator Stainless Steel - IPP# 236139

• Manufacturer: Apperatebau Chrimmitschau Gmbh

carbon steel Shell / 331 stainless steel tubes single effect falling film evaporator pressure tube side -1/3 barg @ 300 degrees C ( 2478 liter) shell 14 barg @ 300 degrees C (1011 liter), 800mm diameter carbon st...

Rising/Falling Film Evaporator 45.4 kg/h (100 lb/h) - IPP# 207655

• Manufacturer: Cream City Boiler

single effect evaporator 100 psi @ 350 degrees F in the jacket on the bottom 1/3 of straight side of tank only. 2097 liters.

Rising/Falling Film Evaporator Stainless Steel 316 - IPP# 214130

SMS vertical single effect falling film evaporator, c/steel heads pressure shell side 5.5/8 bar @ 160/170 degrees C (190 liter) tube side vacuum @ 45/145 degrees C (160 liter), Shell dimensions: 368mm diameter x 8mm

Wiped/Thin Film Evaporator 113.4 kg/h (250 lb/h) Stainless Steel 304 - IPP# 12259

260 gal 50 sq ft Dupont 316SS short path wiped film evaporator Body jkt top head is a flanged dish head of Carpenter 20, btm head is flanged and dish unjkt, 316SS Rotor and wiper entrainment section is made of 31...

Wiped/Thin Film Evaporator - IPP# 245617

MN Thin film evaporator, including vacuum pump, condensers, receivers, etc..

Wiped/Thin Film Evaporator 72.6 kg/h (160 lb/h) Stainless Steel 316 - IPP# 100417

• Manufacturer: Leybold-Heraeus

RECONDITIONED, 20-300 Kg/sq m/hr shortpath evaporator. System working pressure 20x10-1x10 mbar. System consists of (1) Leybold KD300, 32.2 sq ft (3 sq meter) 316SS vert wiped film evaporator, SN 1982/1. W/53.8 (5...

Stainless Steel Wiped/Thin Film Evaporator - IPP# 203196

• Manufacturer: Luwa SMS

24 psig @ 482 degrees F in the jacket, All product wetted parts stainless steel. Mechanical seal on Rotor. Rotor driven by a 3 hp 1800 rpm 3 phase 60 cycle 230/460 volt. Entire system mounted in CS framework, wit...

Stainless Steel 316 Wiped/Thin Film Evaporator - IPP# 87891

• Manufacturer: Kontro

"Adjust-o-film" evaporator. jkt rated 50 psi @ 350 deg F. Belt driven by 20 HP, 3/60/230/460 volt motor.

Wiped/Thin Film Evaporator 626 kg/h (1,380 lb/h) Stainless Steel 304 - IPP# 31726

• Manufacturer: Buflovak/Blaw Knox

304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor spe...

Wiped/Thin Film Evaporator 195 kg/h (430 lb/h) Stainless Steel 316 - IPP# 87894

• Manufacturer: Luwa SMS

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 ...

Glasslined Pfaudler Wiped/Thin Film Evaporator - IPP# 18493

• Manufacturer: Pfaudler

Mfd by Balfour/Sybron Order #48621 Lined w/glass #3115 CS jkt 98 psi @ 392 deg F Has glass covered int rotor w/graphite wipers. Retaining pins and rotor shaft are titanium. jkt body section, 48" dia x 9'10" str s...

Wiped/Thin Film Evaporator 181.4 kg/h (400 lb/h) Stainless Steel 316 - IPP# 49898

• Manufacturer: Artisan

Kontro wiped film evaporator shell rated 25 psi @ 750 deg F. Jacket rated 65 psi @ 750 degree F. Has removable 18" diameter rotor. Mechanical seal. Has 1/2 CS jacket with expansion joint. Has outboard bearings. H...

Stainless Steel 316 Luwa SMS Wiped/Thin Film Evaporator - IPP# 88542

• Manufacturer: Luwa

Rated vac int. Upper jkt rated 257 psi (17.5 Kg/cm2) @ 208 deg C, lower jkt rated 205 psi (14 Kg/cm2) @ 298 deg C. 10" btm cone, 8" dia x 24" long entrainment section No motor, unit is setup for belt drive No stand.