Used Machine Tools in Thuringia, Germany

2013 CHIN FONG G2-160 V
- Manufacturer: CHIN FONG
- safe for manual insertion - Conversion to west - Light barrier
Schmölln, Germany
1998 AMBOLD PEEV 40.2
- Manufacturer: AMBOLD
- pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand control panel - Foot switch - Switch cabinet with PILZ safety control
Schmölln, Germany
2019 AMBOLD PEEV 40.2
- Manufacturer: AMBOLD
- pneumatic clutch (Ambold) - Separate clamping plate - Press safety valve - Two-hand control panel - Balluff cam switch unit - Foot switch - Switch cabinet with ABB safety control and touchscreen display
Schmölln, Germany
1988 PSM H 150-1000
- Manufacturer: PSM
- Manual reel, bent - without own drive - manual Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: t | Inner coil diameter: mm | Total power re...
Schmölln, Germany
1979 ZEULENRODA PYE 10 S1
- Manufacturer: Zeulenroda
- Model: PYE 10
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 10 t | Discharge: 250 mm | Hub: 400 mm | Speed off: 100 mm / sec | Speed up: 450 mm / sec | Distance table - ram: 630...
Schmölln, Germany
GSW-SCHWABE MHM 1,5/1250
- Manufacturer: Herman-Schwabe
- Manual spreading - motor-driven - pressure roller - new lacquering
Schmölln, Germany
1995 DREHER 2370 B
- Manufacturer: Dreher
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 300 mm | Coil weight: 1.5 tons | Inner coil diameter: 400 - 500 mm | Arm length: per arm 670 mm | Total power requ...
Schmölln, Germany
1987 STANKOIMPORT KD 2124K
- Manufacturer: Stankoimport
- Air coupling - Ross press safety valve - Balluff cam switch unit - Maintenance unit - automatic electric lubrication fluid grease - Accumulation tank for clutch - ram with breaking plate - prepared for ejector ...
Schmölln, Germany
1988 MABU 15 TFK
- Manufacturer: Mabu
- friction-locked Ortlinghaus clutch - but not for manual insertion work - Press was tested in our company and delivered with current UVV
Schmölln, Germany
1986 ZEULENRODA PYE 160 S1M
- Manufacturer: Zeulenroda
- Model: PYE 160
Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 160 t | Discharge: 360 mm | Hub: 500 mm | Speed off: 200 mm / sec | Speed up: 125 mm/sec | Distance table - ram: 1000...
Schmölln, Germany
Zipper tilting circular saw ZI-WP700TN
Product information "Zipper Tilting Circular Saw ZI-WP700TN". Engine data Motor power S1 in W 5000 (S2 15min) Protection class IP 54 Speed in min-1 1400 Voltage 400V / 3 / 50Hz Cutting capacity Cutting capacity l...
$880 USD
Ilmenau, Germany
MAXION UNIMAX 3 GL
- Manufacturer: Maxion
Production of gauging threads M4 - M20 Series production Reliable and smooth running Standard and special threads High performance threading machine with lead screw and optimal safety device against tool breakage...
Pößneck, Germany
1980 Schuler CR 80-345
- Manufacturer: Schuler
- Model: CR 80-345
- Stroke length: 50 millimeter
Additional Information: - the machine is currently being partially overhauled - The machine has been newly equipped with the following components: * Separate control cabinet with touchscreen including cabling * N...
Schmölln, Germany
MAXION UNIMAX 3T GL
- Manufacturer: Maxion
Production of gauging threads M4 - M20 Series production Reliable and smooth running Standard and special threads High performance threading machine with lead screw and optimal safety device against tool breakage...
Pößneck, Germany
1984 MÜLLER CD 100.11.69
- Manufacturer: Muller
- Machine was overhauled in 2008 - Work area enclosure with Sick light barrier - Installation height 580 mm - without large ram with ejector and pin clamping piece - Conversion of hydraulics to proportional valve...
Schmölln, Germany