- Trusted Seller
Notching machine NM-2 for façade cassettes
- Manufacturer: Evolutioner
Notching machine NM-2 for façade cassettes is used to cut multi angles in metal sheets up to 1.2 metal thickness. Multi angles are necessary to be made for further bending metal sheet in boxes, façade cassettes e...
$1,400 USDPoland - Trusted Seller
Corner notcher NM-3 for façade cassettes
- Manufacturer: Evolutioner
Corner notcher NM-3 is used by enterprises who specialize in manufacturing of facade cassettes with different configurations and complexity. It allows you to optimize the preparing process, saving time on the cor...
$1,500 USDPoland - Trusted Seller
Manual guillotine metal shearing machine MG-1250
- Manufacturer: Evolutioner
- Maximum thickness: 1 mm
Manual guillotine metal shearing machine MG-1250 is a machine for cutting metal sheets 1250 mm length and 1mm maximum thickness for pieces. Manual guillotine metal shearing machine is a machine that used mostly f...
$2,000 USDPoland - Trusted Seller
Swaging machines SW-1
- Manufacturer: Evolutioner
Swaging machine SW-1 is used for ventilation, conditioner, gutter, chimney and air heating systems productions when it’s necessary to make operation with the end of round pipes. Different operations are possible ...
$2,200 USDPoland - Trusted Seller
Lock former machine LFM
- Manufacturer: Evolutioner
Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radi...
$3,400 USDPoland - Trusted Seller
Sheet metal shear MG 2550
- Manufacturer: Evolutioner
- Maximum thickness: 0.6 mm
The sheet metal shear MG-2550x1 is perfect solution for companies who work with sheet and coil metal up to 1mm thickness. Maximum working length of machine is 2550 mm. Guillotine is equipped with special metal fi...
$3,100 USDPoland - Trusted Seller
Plate bending machine PB-2000
- Manufacturer: Evolutioner
Plate bending machine PB-2000 to produce sheet metal pipes by rolling sheet metal between rollers You can adjust distances between rolls to get requested pipe diameter. Our customers very often purchase PB-2000 m...
$2,500 USDPoland - Trusted Seller
Sheet metal slitting machine (slitter machine) 4 STRIPS
- Manufacturer: Evolutioner
- Maximum thickness: 1 mm
The sheet metal slitting machine (slitter, cut-to-length machine) is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate. This sheet metal...
$3,600 USDPoland - Trusted Seller
Metal hemming machine HR-2
- Manufacturer: Evolutioner
Metal hemming machine There is profile-drawing customer can get with our machine You can hem one or both sides with our machine
- Trusted Seller
Cutting machine SM-350
- Manufacturer: Evolutioner
In this variant of electric cutting machine our customer desired to cut metal sheets from width 350mm into 12 strips. The width of one strip is 31.4mm Maximum metal thickness 1 mm Numbers of the strips – 12 The d...
$3,700 USDPoland - Trusted Seller
Manual shear MG-2100
- Manufacturer: Evolutioner
- Maximum thickness: 1 mm
Manual guillotine shear MG-2100 is designed to cut sheet metal with a thickness up to 1 mm and a maximum length of 2100. To provide high quality cutting, the machine is equipped with a special locking mechanism, ...
$2,500 USDPoland - Trusted Seller
Standing seam metal roof machine F3
- Manufacturer: Evolutioner
Standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the standing seam roofing. The double standing seam lock roofing is widely us...
- Trusted Seller
Manual elbow machine MEM-150
- Manufacturer: Evolutioner
Manual elbow machine MEM-150 forms elbows from round pipes that are used in process of assembling ventilation and drainage systems. The corrugated elbow looks fancy and it could be produced from the pipes with di...
$2,800 USDPoland - Trusted Seller
Roll former roofing machine F3-1000
- Manufacturer: Evolutioner
Roll former roofing machine F3-1000 is an equipment to produce roofing panels of double standing seam for standing seam roofing production. Standing seam roofing is going to be popular thanks to It’s unique desig...
- Trusted Seller
Cut-to length slitting machine SM-1250х8
- Manufacturer: Evolutioner
Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on r...
$4,500 USDPoland
Tip: Enter manufacturer, model or keyword
