Used Processing in Texas, USA

Trusted Seller
Spare Lance Assembly
- new
- Manufacturer: Specialty Equipment
All standard filling lances are made with 316 stainless steel tubing. Each one has a machined spool that is glass-filled and Teflon seated and sealed, attached to a push rod. An air cylinder raises and lowers the...
Houston, TX
2 PHASE SEPARATOR
- used
Capacity (gals): 595 | Diameter (in): 30 | Length (ft-in): 10-0 | Pressure (psi): 1440 | Temperature (deg f): 125 | Orientation: H | Material: CS
Houston, TX
ALDRICH TRIPLEX
- used
- Manufacturer: Aldrich
PUMP W/SPARE BODY, VERTICAL PISTONS. BELT DRIVEN, NO MOTOR. MAXIMUM CONTINUOUS RATING 1200 PSIG, ALDRICH PUMP #'S 16442 & 16445.
Houston, TX
Ronningen-Petter 4 BANK
- used
- Manufacturer: Ronningen-Petter
USED RONNINGEN-PETTER CYLINDER FILTER SIZE: 4 BANK MATERIAL: SS DELTA GAURD AUTO FILTER
Cypress, TX
Kamyr Outlet Devise
- used
- Manufacturer: Kamyr
Kamyr Out Let Devise, Psi 351@350°; SerialNumber 409-R83; Size 5
Cypress, TX
Andritz Chip Meter
- used
- Manufacturer: Andritz
Rebuilt Andritz #4 Chip Meter Size: #4
Cypress, TX
Black Clawson MINI M-25
- used
- Manufacturer: Black Clawson
USED BLACK CLAWSON MODEL: MINI M-25 WITH MECHANICAL SEAL WITH 2-FOIL ROTOR ASSEMBLY WITH SLOTTED BASKET, ON BASE WITH SIEMENS 20 HP, 1200 RPM, 575 VOLT MOTOR MATERIAL: ALL 316 STAINLESS STEEL
Cypress, TX
ALDRICH TRIPLEX
- used
- Manufacturer: Aldrich
PUMP S/N 20893, LUFKIN GEAR REDUCER 11.6/1 RATIO AND AMERICAN STANDARD GYROL FLUID DRIVE. LIMITED INFORMATION ON FILE. PUMP RATED FOR 10,000 PSI
Houston, TX
Trusted Seller
BJ Rhino Triplex
- used
- Manufacturer: Rhino
Engine: QSK 50 Cummins | Transmission: Allison | Trailer: 2011 Pratt | Pump: 2017 Gardner Denver 2250HD | Hours: 13,470
$165,000 USD
Get financing
Est. $3,105/mo
Texas, USA
Impco Model 500
- used
- Manufacturer: Impco
Used Impco Model 500 TRI PHASE MIXER Material TITANIUM WETTED PARTS
Cypress, TX
Hagglunds RCC1013MA100B000011A
- used
- Manufacturer: Hägglunds
Eaton Hydre-Mac Hagglund RCC1013 Radial Piston Hydraulic Motor Model Number: RCC1013MA100B000011A Serial Number: 27217-6526052 Weight: 1350 KG or 2976 lbs Displacement: 12780 CC (780 cu-In) HTC 8412.2980.30 Rated...
Cypress, TX
Cameron Winder
- used
- Manufacturer: Cameron
72” Cameron two drum Surface Winder with 13 Male and Female shear slitting knives. Shaftless Unwind for 80” diameter rolls. 54” Maximum rewind diameter.
Cypress, TX
Trusted Seller
STAINLESS STEEL INDUSTRIAL PROCESSING CONTAINER M5903
- used
Warranty Information THIS IS A USED ITEM, IN GOOD CONDITION AND INCLUDES A 30 DAY WARRANTY. Unit in good condition
$350 USD
El Paso, TX
Nord 1.5-Hp 3Ph Stainless Steel Food Grade Auger-Mixer Bottom-Discharge 230/460V
- used
- Manufacturer: Nord
Home Contact About Technology Industrial Lab & Test Electrical Semiconductor Nord 1.5-Hp 3Ph Stainless Steel Food Grade Auger-Mixer Bottom-Discharge 230/460V Manufacturer: Nord Model: Does Not Apply Condition: Us...
$1,500 USD
Leander, TX
Freezer Panels :4″ thick X 10′ tall : qty 23
- used
good used freezer panels in Houston TX facility – can inspect Freezer Panels :4″ thick X 10′ tall : qty 23 20′ ceiling panels Door panel good used freezer panels in Houston TX facility – can inspect Freezer Pane...
Houston, TX
SMC IDFB15 Dryer
- used
- Manufacturer: SMC
- Model: IDFB15
Good condition SMC IDFB15 Dryers. Located in USA and other countries. Click request price for more information.
USA