New Processing

Neomatrix Electrical - IPP# 235802

• Manufacturer: Neomatrix

Control system With a Dell PC and monitor Rexroth/Indroamat RES U Drive 500 series

Burton Corblin #A-4-C-85 Reciprocating Compressor - IPP# 103851

• Manufacturer: Burton Corblin

dry hydrogen reciprocating compressor suction pressure 17 kg/cm2, discharge pressure 35-66 kg/cm2 speed 257 rpm, 400 rpm,

Burton Corblin A34C40 Reciprocating Compressor - IPP# 103850

• Manufacturer: Burton Corblin

dry hydrogen reciprocating compressor. suction pressure 6.5 - 9 Kg/sq cm discharge pressure 23 - 35.4 Kg/sq cm

QVF Packed Column - IPP# 222034

• Manufacturer: De Dietrich

QVF Glass Column, designed by DeDietrich, built by QVC. Each section is made of borosilicate glass ISO 3585. This column is unused and packed in crates, ready for transport. (8) grid supports for packing (no pack...

Packed Column 300 mm (11.8 in) - IPP# 220461

• Manufacturer: International Process Plants

high clear glass rectification packed Column. column consisting of 1-300mm diameter x 1.5m high column section, type CS300/1500 and 1-300mm diameter x 495mm high diffuser bend (head), type PBR300/150, opening hea...

Carbon Steel Water Cooled Chiller - IPP# 216599

• Manufacturer: Trane

Dual direct drive semi-hermetic centrifugal compressors rated 0.45Kw/ton efficiency. Driven by (1) 893KW (LH Circuit) and (1) 946KW (RH Circuit) motors, 4160V, 60Hz, 3 Phase. Uses low pressure refrigerant to prod...

Centrifuge-Peeler 630 mm (24.8 in) Stainless Steel Austenitic - IPP# 212741

• Manufacturer: ZVU (Czech Rep)

With available documents and parts.

Stainless Steel Austenitic Centrifuge-Disc Bowl - IPP# 238461

• Manufacturer: Alfa Laval

S1657 with control system With Clean In Place with an Ra0.8 finish. Variable discharge system with water cooled jacket Maximum feed density 1100 kg/m3, maximum sediment density 1400 kg/m3. Feed temperature 0-100 ...

Centrifuge-Disc Bowl 7.5 kW (10.1 HP) - IPP# 99750

• Manufacturer: Westfalia

frame with out bowl. Clarifier (2-phase) design IP55 motor Cast iron frame w/brake, oil level sight glass and revolution indicator for bowl speed check. Drive by standard flange mount motor. Power transmitted via...

Centrifuge-Disc Bowl 37.3 kW (50 HP) Stainless Steel - IPP# 70801

• Manufacturer: Westfalia

disc nozzle centrifuge Disc stack specs 14 3/8" OD, 1mm caulks, 40 deg angle, (15) discs w/semi-circular rising channels on OD, 1" wide x 1 1/2" deep 3/60/230/460 volt w/fluid clutch Tools, instruction book

Stainless Steel 316 Centrifuge-Disc Bowl - IPP# 75408

• Manufacturer: Disco

flameproof motor Openings: 1" x 2" (25mm x 50mm), 2-1" (25mm) With on/off switch and tools

Manual Discharge-Top Centrifuge-Basket 850 mm (33.5 in) Stainless Steel 316 - IPP# 46415

• Manufacturer: Sangerhausen

perforated basket centrifuge

Manual Discharge-Top Centrifuge-Basket 500 mm (19.7 in) Lined - IPP# 38876

• Manufacturer: Cepa

epoxy lined perforated basket centrifuge 8-10 batches/h W/3000 watt heating unit and 4 CBM/min air blower for automatic drying. Hinged top cover.

Stainless Steel 316 Batch-Type Agitated Reactor - IPP# 247273

Glasslined UGE UA-1000 Reactor Body /Jacketed Tank/Receiver - IPP# 246498

• Manufacturer: Standard Glass Lining Technology Limited

Body Only