• USED WELEX 4.5″ EXTRUDER / 15091

        used 4.5″ welex extruder, 36:1 l/d, water cooled, vented at 112″ from feed section, eurotherm temperature controls, 6 barrel zones, 4 die zones, melt temp, pressure readout, amp meters per zone, 250 hp dc, direct...

        No price
        Elk Grove Village, IL, USA
      • NRM 3.5″ PACEMAKER III EXTRUDER 14983

            nrm pacemaker iii 3.5″ extruder, s/n 15971, 32:1 l/d, 100 hp 550v 1750 rpm d/c motor thru 14.9:1 gearbox, air cooled vented barrel with a 42″ centerline, 7″ x 3.5″ oval in-feed throat, no drive or temperature con...

            No price
            Elk Grove Village, IL, USA
          • USED DAVIS STANDARD 2.5″ EXTRUDER 7778

                used davis standard 2.5″ extruder barrel, 24:1 l/d (3 available)

                No price
                Elk Grove Village, IL, USA
              • NRM 4.5" EXTRUDER BARREL 2025

                    nrm 4.5" extruder barrel, 24:1 l/d, no s/n

                    No price
                    Elk Grove Village, IL, USA
                  • DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

                        davis standard single stage extruder screw, approximately 28:1 l/d, with mixing pins at screw end

                        No price
                        Elk Grove Village, IL, USA
                      • FLENDER 3.5" EXTRUDER GEARBOX ONLY 14755

                            flender 3.5" extruder gearbox only, s/n 300845-1-1, 10.852: gear ratio, manufacture number sro 8301-0601 / 322641, type szne250, driver 1750 rpm, driven 161.3 rpm

                            No price
                            Elk Grove Village, IL, USA
                          • DAVIS STANDARD 165MM60TPIH 6.5" EXTRUDER 10869

                                davis standard model 165mm60tpih 6.5" extruder, s/n x7206, 27:1 l/d, 150 hp dc motor, 100 rpm screw speed, 526 hp rated gearbox with a 1.5 service factor, no feed throat, no control panel, 16′ lon...

                                No price
                                Elk Grove Village, IL, USA
                              • SENCORP 6" EXTRUDER 12062

                                    sencorp 6" extruder, no s/n, 30:1 l/d, 174" long electrically heated 6 zone water cooled barrel with crossover for a primary extruder, no feed throat, no motor or controls, 42" centerline, last us...

                                    No price
                                    Elk Grove Village, IL, USA
                                  • GLOUCESTER 6" EXTRUDER 12088

                                        gloucester 6" extruder, no model number, no s/n, 30:1 l/d, electrically heated water cooled 6 zone vented barrel with screw and clamp, no motor, 42" center line, 1 hp 6" x 11" oval in-feed bridge ...

                                        No price
                                        Elk Grove Village, IL, USA
                                      • UNKNOWN MANUFACTURE 4.5" EXTRUDER 10920

                                            unknown manufacture 4.5" extruder, 34:1 l/d, 8.5" square in-feed, electrically heated and water cooled 6 zone barrel with screw, belt drive design, 42" centerline, mounted on adjustable height cas...

                                            No price
                                            Elk Grove Village, IL, USA