• Demaco Pasta Press

    • Manufacturer: Demaco

      3000 to 4000 lb. capacity per hour equipped with a 7 1/2 hp motor 18" paddle augers with 2 stands constructed with stainless steel

      No price
      Ravenna, OH, USA
    • 4 IN. X 14 IN. EXTRUDER – S/S

          1 – used 4 in. stainless steel extruder. 14 in. barrel length. approx. 5 in. wide x 5 in. long feed section with stainless steel hopper. 7 in. long jacketed barrel section. 4 hp drive. mounted on base. f.o.b. – c...

          No price
          Twinsburg, OH, USA
        • APV Baker Perkins MP80 80 MM TWIN SCREW EXTRUDER MIXER

          • Manufacturer: APV

            1 – used apv twin screw extruder/mixer. model mp 80. with 80 mm screws. typical outputs: 1500-2900 (kg/h). 225 hp reliance 460 volt inverter duty motor. with control cabinet. f.o.b. – location

            No price
            Twinsburg, OH, USA
          • APV Baker Perkins Twin Screw Extruder 3650

            • Manufacturer: APV

              one(1) used apv baker perkins twin screw extruder model mp80 80 mm screws, typical outputs of 1500-2900 kg per hour. equipped with a 225 hp electric motor, 460 voltage inverter duty. control cabinet is included. ...

              No price
              Painesville, OH, USA
            • 10" Ventura Hydraulic Fab Horizontal Ram Extruder

              • Manufacturer: RAM

                used 10" ventura hydraulic fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.

                No price
                Cleveland, OH, USA
              • CP12 FARREL CONTINUOUS MIXER/EXTRUDER

                • Manufacturer: Farrel

                  one (1) used farrel continuous mixer/extruder, with farrel cp12 continuous mixer, 5 hp 230/460 volt motor, mixer discharges directly into a 2" davis standard extruder, model dsm20, 12:1 l/d, electrically heated, ...

                  No price
                  Cleveland, OH, USA
                • Christian 12 IN. X 5 FT. 6 IN. TWIN SCREW EXTRUDER MIXER – S/S

                  • Manufacturer: Christian

                    1 – used twin screw extruder mixer. stainless steel construction. 12 in. dia. x 5 ft. 6 in. long screws. jacketed mixing section measures approx. 4 ft. 6 in. long. screws are driven by a 7.5 hp 220/440v motor thr...

                    No price
                    Twinsburg, OH, USA
                  • SPECIAL EXTRUDER FOR DENTAL FLOSS

                        1 – used extruder formerly used to produce dental floss. unit is ac powered does not have a heater controller and is not a typical plastics extruder. manufacturer is unknown no additional information found. piece...

                        No price
                        Twinsburg, OH, USA
                      • CP45 FARREL CONTINUOUS MIXER/EXTRUDER

                        • Manufacturer: Farrel

                          one (1) used farrel model cp45 compounding system, 4fcm continuous mixer with 100 hp dc motor, 5" extruder, 8:1 l/d, electrically heated, air cooled, non-vented, driven by 60 hp dc motor, strand die, with control...

                          No price
                          Cleveland, OH, USA
                        • 6" APV Sterling Davis-Standard Extruder, 32:1 L/D, 400 HP

                          • Manufacturer: APV

                            used 6" apv sterling davis-standard extruder, 32:1 l/d, electrically heated, water cooled barrel with circulation system, jacketed feed section, 68" center line height, 400 hp dc motor with scr controller, 17.212...

                            No price
                            Cleveland, OH, USA

                          Have 5 seconds to help us improve the results?

                          I'll do it
                          No thanks