Processing » Extruders

Building Filters

151

Used stack

  • GLOUCESTER 66″ COOLING ROLL STAND

    GLOUCESTER 66″ COOLING ROLL STAND 18226

      One (1) used 66″ Gloucester cooling and polishing stand having three (3) nominal 20″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation at a 56″ center-line height. Includes t...

      Elk Grove Village, IL
    • PTI 3 ROLL DOWNSTACK W/COOLING

      PTI 3 ROLL DOWNSTACK W/COOLING 18040

        One (1) used PTI model Revolution cooling and polishing stand with three 66″ face chrome plated rolls mounted in a vertical arrangement for down stack operation. The top roll measures nominal 15″ diameter, while ...

        Elk Grove Village, IL
      • DAVIS STANDARD 52″ WIDE 3

        DAVIS STANDARD 52″ WIDE 3 14917

        • Manufacturer: Davis-Standard

        Davis standard model Exemplar cooling and polishing stand with three 52″ face chrome plated rolls mounted in a vertical arrangement for down stack operation. The top roll measures a nominal 18″ in diameter, while...

        Elk Grove Village, IL
      • 60″ S-WRAP ROLL STAND 18013

        60″ S-WRAP ROLL STAND 18013

          60″ wide S-wrap roll stand. Silent chain drive powered by a 2 HP 1750/2050 RPM 180-volt D/C motor. Pneumatic pressure rolls

          Elk Grove Village, IL
        • JOHNSON 54 X 8 PULL

          JOHNSON 54 X 8 PULL 18800

          • Manufacturer: Johnson

          Johnson roll pull roll stand. Two (2) 54″ x 8″ diameter rubber covered rolls. Rolls are driven by an approximate 10 HP D/C motor through a “Drive-All” four speed gearbox. Air actuated top pull roll.

          Elk Grove Village, IL
        • CHROME ROLL 10″ X 36″

          CHROME ROLL 10″ X 36″ 16019

            10″ diameter x 36″ chrome roll cored for water cooling.Two are available.

            Elk Grove Village, IL
          • TEXTURED ROLL 4942

            TEXTURED ROLL 4942

              Textured roll, cored for cooling, 12″ diameter x 53″ wide.

              Elk Grove Village, IL
            • TEXTURED ROLL 53″ X 18″

              TEXTURED ROLL 53″ X 18″ 3790

                Textured roll 18″ diameter x 53″ long with textured surface.

                Elk Grove Village, IL
              • TEXTURED ROLL 4941

                TEXTURED ROLL 4941

                  Textured roll, cored for cooling, 12″ diameter x 54″ wide.

                  Elk Grove Village, IL
                • Trusted Seller
                  56" Wide HPM/Battenfeld Gloucester Horizontal

                  56" Wide HPM/Battenfeld Gloucester Horizontal Sheet Line

                  • Manufacturer: Battenfeld
                  • Model: Gloucester

                  56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barre...

                  United States
                • no-image_en.png

                  WELEX 54″ 3-ROLL DOWN STACK 18834

                  • Manufacturer: Welex

                  One (1) used 54″ Welex cooling and polishing stand having three (3) chrome plated rolls mounted in a vertical arrangement for down stack operation at a 66″ center-line height. S/N 6493. Model 12x24x24 Compact Tak...

                  Elk Grove Village, IL
                • Brabender LAB Sheet Line

                  Brabender LAB Sheet Line

                  • Manufacturer: Brabender

                  Brabender LAB Sheet Line

                  Rockville Centre, NY
                • 2002 Berstorff ZE 25Rx44D

                  2002 Berstorff ZE 25Rx44D

                  • Manufacturer: Berstorff

                  Co-Rotating Twin Screw Extruder Used Berstorff ZE 25Rx44D (2002) Extruder for Sale. This pre-owned Berstorff plastic extruder is located in The United States and available to be seen under power for an inspectio...

                  USA
                • Trusted Seller
                  no-image_en.png

                  54" Wide Welex 3 Chrome Roll Down Stack

                  • Manufacturer: Welex

                  Used Welex 3 Chrome Roll Down Stack, 54" Wide Chill Rolls 18" x 24" x 24" Diameter Rolls, Chain Driven By AC Drive 68" Centerline 165 PSI @ 650F Water System With (4) 7.5 HP Pumps, (6) 7.5Kw Chromalox Immersion H...

                  United States
                • Trusted Seller
                  Akron Standard Machine (ASM) Batch

                  Akron Standard Machine (ASM) Batch Off System

                  • Manufacturer: ASM

                  Akron Standard Machine (ASM) Batch Off System Used ASM (Akron Standard Machine) Batch Off System, 30" wide, dip tank, 32' long cooling section with wig wag front to back stacking conveyor.

                  Cleveland, OH
                23456

                Overview

                Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

                FAQ

                What should I consider when buying a used extruder?

                Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

                How do I ensure the extruder is shipped safely to my location?

                Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

                What is the maintenance schedule for an extruder?

                Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.