Processing » Extruders

Search By Manufacturer

Search By Country

Building Filters

2007

Used heating

  • Industrial Twin Screw Extruder –

    Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel

    • Manufacturer: Krauss-Maffei

    52102001 Used 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.

    Belvidere, IL
  • Pre-Owned Killion KL-075 Single Screw

    Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

    • Manufacturer: KillionKillion

    54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...

    Belvidere, IL
  • Davis Standard 10" Extruder, Model

    Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

    • Manufacturer: Davis-Standard

    10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...

    Belvidere, IL
  • Trusted Seller
    1999 BUSS MDS200-4 #0363624

    1999 BUSS MDS200-4 #0363624

    • Manufacturer: Buss
    • Model: MDS200-4

    8” Buss Hot Melt Single-Screw Extruder and Pelletizing System Screw is water heated/cooled Direct driven by a 100 hp DC motor, volt, rpm Includes: Buss Hot Cut Pelletizer Model PVW200 with oil heated/cooled die p...

    Toledo, OH
  • Trusted Seller
    WAYNE 1.25"

    WAYNE 1.25"

    • Manufacturer: Wayne

    Used 1.25” Wayne Single-Screw Extruder Driven by a 7.5 hp DC motor with SCR control,230 volt

    Hainesport, NJ
  • Trusted Seller
    2016 American Kuhne AK 125

    2016 American Kuhne AK 125 24.1 A/C EXT

    • Manufacturer: Kuhne

    Length‑to‑Diameter (L/D) Ratio: 24:1 Equipped With • Air‑Cooled Barrel with High Capacity Blow‑On Cooling • Heated Clamp / Breaker Plate • Feed Section with Water Jacket and Needle Valve • Melt Pressure and Tempe...

    $44,900 USD

    Get financing

    Est. $845/mo

    Chicago, IL
  • Trusted Seller
    DAVIS STANDARD 150INDS-20

    DAVIS STANDARD 150INDS-20

    • Manufacturer: Davis-Standard

    Used 1.5” Davis Standard Vented Single-Screw Extruder Model: 150IN DS-20 Driven by a nontagged motor and a Reliance model GV3000 AC drive Gearbox: 6.53:1 ratio, rated for 50 hp, 1.25 service factor, 152 rpm screw...

    Hainesport, NJ
  • Trusted Seller
    Gloucester 120/150

    Gloucester 120/150

    • Manufacturer: Gloucester

    Conair (6) material tru blend loader blender feed hopper 4.5" Extrek hydraulic screen changer with hydraulic power pack, 14" diameter x 48" long cooling mandrel, Gloucester dual pull roll stand, 52" wide pull rol...

    Valley Cottage, NY
  • Trusted Seller
    DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

    DAVIS STANDARD EXTRUDER MDL. MV35IN35SR

    • Manufacturer: Davis-Standard
    • Model: MV35IN35SR

    107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE ELECTRICALLY HEATED, WATER COOLED (CLOSED LOOP), AND SIDE VENTED BARREL AT A 52" CENTERLINE HEIGHT. GEARBOX HAS A 5....

    Illinois, USA
  • Trusted Seller
    Welex 350

    Welex 350

    • Manufacturer: Welex

    3.5" Used Extruder Used Welex 350 Used Plastic Extrusion Machinery for sale. This pre-owned machine is available all over the US

    Sterling, MA
  • BAKER PERKINS MPC/V-50 107120

    BAKER PERKINS MPC/V-50 107120

    • Manufacturer: Baker Perkins

    BAKER PERKINS MODEL MPC/V-50 DIRECT EXTRUSION LINE BUILT IN 1984 INCLUDING: 75MM SINGLE SCREW EXTRUDER WITH A 36" ELECTRICAL HEATED, WATER COOLED BARREL WITH A 12 TO 1 L/D RATIO, 15 HP, 1750 RPM AC DRIVE MOTOR. 3...

    Cleveland, TX
  • WERNER-PFLEIDERER ZSK170 98923

    WERNER-PFLEIDERER ZSK170 98923

    • Manufacturer: WP

    MFG. BY WERNER & PFLEIDERER IN 1996; REBUILT IN 2003; CO-ROTATING DESIGN; 6 BARREL SECTIONS; DEGASSING BARREL; BARREL BORE; 102MM SCREW SHAFT DIAMETER; REQUIRES MAIN & AUXILIARY DRIVE; WITH ME-1530C GEAR BOX @ B...

    Cleveland, TX
  • EXTRUDER, 6'', 1-SCREW, 24-1LD, STERLING,

    EXTRUDER, 6'', 1-SCREW, 24-1LD, STERLING, 6'', ELECTRIC, 6 ZONES, 300HP

    • Manufacturer: Sterling

    EXTRUDER, 6'', 1-SCREW, 24-1LD, STERLING, 6'', ELECTRIC, 6 ZONES, 300HP

    Alvin, TX
  • EXTRUDER, 8'', 1-SCREW, 32-1L/D, STERLING,

    EXTRUDER, 8'', 1-SCREW, 32-1L/D, STERLING, 8'', ELECTRIC, 6 ZONES, 500HP

    • Manufacturer: Sterling

    EXTRUDER, 8'', 1-SCREW, 32-1L/D, STERLING, 8'', ELECTRIC, 6 ZONES, 500HP. Unitized On Base.

    Alvin, TX
  • EXTRUDERS 100491

    EXTRUDERS 100491

    • Manufacturer: Johnson

    Hp: 25 | L/d: 24:1 | Qty: 1 | Vented: NO | Cooling: WATER | Heat type: ELECTRIC | Control type: NO | No. of zones: 4 | Screw diameter: 2" | Screen changer y/n: N

    Cleveland, TX
12345

Overview

Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

FAQ

What should I consider when buying a used extruder?

Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

How do I ensure the extruder is shipped safely to my location?

Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

What is the maintenance schedule for an extruder?

Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.