Processing » Extruders

Building Filters

46

Used inline

  • Trusted Seller
    212mm Erema Sheet Extrusion /

    212mm Erema Sheet Extrusion / Recycling System, Model Vacurema Basic 2321T Inline, New in 2017

    • Manufacturer: Erema

    Used 212mm Erema Sheet Extrusion / Recycling System, Model Vacurema Basic 2321T Inline, New in 2017 -2300mm Diameter Stainless Steel Reactor Tank, 400kw -(3) Sets Vacuum Pump Stations, RVP_4000_Dry With Self Clea...

    United States
  • Trusted Seller
    GOODMAN 3" Wide x 22"

    GOODMAN 3" Wide x 22" Long

    • Manufacturer: GOODMAN

    Used Goodman Solid Belt Puller – Approx. 3" (76 mm) Wide x 22" (559 mm) Long Solid belt design with an approximate belt width of 3 inches (76 mm) and length of 22 inches (559 mm). Frame includes a provision for i...

    Hainesport, NJ
  • Trusted Seller
    Extrutech Extruder Single Screw E-925

    Extrutech Extruder Single Screw E-925

    • Manufacturer: Extrutech

    Extrutech Model E-925, inline, (5) zone, single screw extruder, with production rates from 10,000 to 33,000 Lbs of kibble style dog food or 10,000 to 26,000 Ibs of kibble style cat food per hour. Equipped with 9"...

    Carol Stream, IL
  • Trusted Seller
    Buhler-Maig Extruder Single Screw M-MN-400

    Buhler-Maig Extruder Single Screw M-MN-400

    • Manufacturer: Bühler

    Buhler Maig Model M-MN-400, inline, single screw extruder with productions rates per hour – depending on materials and application. Equipped with product portioner and has product feed hopper with dual 36" long x...

    Carol Stream, IL
  • GLOUCESTER 66″ COOLING ROLL STAND

    GLOUCESTER 66″ COOLING ROLL STAND 18226

      One (1) used 66″ Gloucester cooling and polishing stand having three (3) nominal 20″ diameter chrome plated rolls mounted in a vertical arrangement for down stack operation at a 56″ center-line height. Includes t...

      Elk Grove Village, IL
    • Trusted Seller
      20' CDS Vacuum Sizing Tank,

      20' CDS Vacuum Sizing Tank, 16" Wide

      • Manufacturer: CDS

      Used 20' CDS Vacuum Sizing Tank, 16" Wide x 12" Deep 16" Width, 18 Water Outlets, 18 Vacuum Outlets, 4 Kw Water Ring Vacuum Pump, 3 Hp Process Pump, With Inline Filter, Plate And Frame Heat Exchanger, Comes With ...

      United States
    • Trusted Seller
      2.5" Davis Standard Thermatic, Single

      2.5" Davis Standard Thermatic, Single Screw Extruder, Model 25IN25, 25:1 L/D, 40 HP DC Motor

      • Manufacturer: Davis-Standard
      • Model: Thermatic

      Air Cooled, 4 Barrel Zones 3.5" x 3.5" Feed Throat 40 HP Reliance Electric Type B2810A1Z DC Motor With 1/2 HP Blower Shunt Wound Inline Gear Reducer, Ratio 17.26:1, Extruder RPM: 100 Hes 301 System, Dynisco UPR80...

      United States
    • Trusted Seller
      35" PET Film Sheet Line,

      35" PET Film Sheet Line, With 3.5" American Kuhne Extruder Recently Refurbished

      • Manufacturer: Kuhne

      Used 35" PET Film Sheet Line, With 3.5" American Kuhne Extruder, Recently Refurbished 5 Barrel Zones, 15 Die Zones, 150 Hp AC Motor with Belt Drive 100 RPM Base Screw Speed, Extended to 150 RPM With Belts, ABBACS...

      United States
    • Trusted Seller
      14' CDS Stainless Steel Vacuum

      14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH

      • Manufacturer: CDS

      Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH, Table Size 2.5 X 14 FT 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame...

      United States
    • Trusted Seller
      14' CDS Stainless Steel Vacuum

      14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH

      • Manufacturer: CDS

      Used 14' CDS Stainless Steel Vacuum Calibration Table Model CVC 14-475 LH Table Size 2.5 X 14 FT 14" Center to Center Width Between Mounting Holes (4) 7.5HP Baldor Vacuum Pumps 575/3/60, 8A 1725 RPM, 213TC Frame ...

      United States
    • Trusted Seller
      2002 Tecom EXKN 75 30D

      2002 Tecom EXKN 75 30D

      • Manufacturer: Tecom

      Ref. 3097- USED TECOM EXKN 75 30D, YEAR 2002 Manufacturer: TECOM Year: 2002 Monolayer Tower included

      Sant Gregori, Spain
    • Trusted Seller
      2002 Mam 70 ESKB

      2002 Mam 70 ESKB

      • Manufacturer: Mam

      Ref. 3027- MAM Extruder 70 ESKB, YEAR 2002 Manufacturer: MAM Year: 2002 Towing oscillating extruder with air Exchange insinde the bubble Extruder with fixed head and oscillating drive

      Sant Gregori, Spain
    • Trusted Seller
      2017 NANJING PVC EXTRUDER

      2017 NANJING PVC EXTRUDER

      • Manufacturer: Nanjing, Uway Extruder

      Ref. 7013- USED NANJING PVC EXTRUDER, YEAR 2017 Manufacturer: NANJING Year: 2017 Polishing stack/ calender lines unit: 3 x chill rollers with independent drive

      Sant Gregori, Spain
    • Trusted Seller
      Townsend Kontura Sausage Forming, Hot

      Townsend Kontura Sausage Forming, Hot Dog Extrusion Line #S745170

      • Manufacturer: Townsend

      Townsend Kontura High Speed Sausage Forming Line with brine shower cabinet, brine reservoir, cross-linker pump, cross-linker reservoir, drive motors and touch screen controller. System includes Kontura belt, crim...

      Chowchilla, CA
    • Trusted Seller
      2017 NANJING plastic sheet extrusion

      2017 NANJING plastic sheet extrusion machine

      • Manufacturer: NANJING

      Number of layers: 1 | Material: PVC | Sheet width (mm): 1350 | Screw diam: 90 mm | Description: Twin screw counter rotating | Head description: Make Allied | Polishing stack/ calender lines unit: 3 x chill rolle...

      Negrar di Valpolicella, Italy
    1234

    Overview

    Extruders are machines used in the manufacturing process to shape materials by forcing them through a die. Commonly used in plastic and metal industries, extruders are essential for creating products like pipes, sheets, and profiles. Their versatility allows them to handle various materials, including polymers, rubber, and even food products.

    FAQ

    What should I consider when buying a used extruder?

    Evaluate the extruder's condition, age, and previous usage. Check for signs of wear, especially on the screw and barrel, and ensure the machine has been well-maintained.

    How do I ensure the extruder is shipped safely to my location?

    Hire a logistics company experienced in transporting heavy machinery. Make sure the extruder is properly secured, and all parts are protected from damage during transit.

    What is the maintenance schedule for an extruder?

    Regular maintenance includes inspecting the screw and barrel for wear, checking and replacing filters, and ensuring the cooling and heating systems are functioning properly. Follow the manufacturer’s guidelines for specific maintenance intervals.